Zanussi TL 984 C1 Instruction Manual

Manual is about: WASHING MACHINE TL 984 C1

Summary of TL 984 C1

  • Page 1

    Lave-linge washing machine tl 984 c1 zzzzzanussi anussi anussi anussi anussi notice d'utilisation instructions manual 146 1309 01.

  • Page 2: Contents

    21 contents for the user safety instructions 23/24 description of the appliance 25 use of your appliance 26 operating instructions 27/28 programme chart 29/30 hints & tips 31-33 cleaning and maintenance 34 if something doesn't work 35/36 service 37 for the installer technical information 38 installa...

  • Page 3: Safety Instructions

    22 you must read the whole of this instruction book before you use the appliance. Follow the advice carefully. Keep the book for future reference. If you sell or give away the appliance, make sure that the book is passed to the new owner. The following warnings are provided in the interest of overal...

  • Page 4

    23 safeties lid : your washing machine is equipped with a safety avoiding the switching of the appliance when the flapdoors of the drum are opened ; the closure of the lid is so impossible. An electromechanic safety prohibits the opening of the lid when the washing machine works and 2 minutes after ...

  • Page 5

    24 description of the appliance detergent dispenser symbols ( ) washing powder for programmes with prewash (1). ( ) washing powder or liquid detergent for the main wash (2). ( ) bleach compartment (3). ( ) liquid additives (fabric softener and conditioner...) (4). (5) overflow orifice control panel ...

  • Page 6: Use Of Your Appliance

    25 use of your appliance the control panel 1 on/off pushbutton " " press the on/off pushbutton, the programme starts : the control lamp lights on. 2 control lamp the control lamp lights on when the appliance is working (on/off pushbutton " " pressed). It lights off when the on/off pushbutton " " is ...

  • Page 7: Operating Operations

    26 1. Place the laundry in the drum lift up the lid of the machine. Open the drum with your two hands by pressing the button a and the two flapdoors till they disengage. Introduce the laundry into the drum ; close the drum and the lid of the machine. Be careful : before closing the lid of your machi...

  • Page 8

    27 6. Select the temperature choose the temperature which corresponds to the chosen programme. 7. Select the programme choose the programme according to the nature and the degree of soil of the laundry. Turn the programme selector clockwise to select the chosen programme. 8. Starting of the programm...

  • Page 9: Programmes Chart

    28 programmes chart programmes for cotton/linen maximum load : 4,5 kg (cotton) ( 1 ) if the laundry can withstand the bleaching treatment. The temperatures given in the programs table are provided as a guide. You can vary them using the thermostat knob on your washing machine. Always scrupulously re...

  • Page 10

    29 programmes for synthetics/delicates/wool maximum loads : 2,0 kg (synthetics), 1 kg (wool). The temperatures given in the programs table are provided as a guide. You can vary them using the thermostat knob on your washing machine. Always scrupulously respect the temperature shown on the label on e...

  • Page 11: Hints And Tips

    30 hints and tips washing hints you are advised not to leave your laundry too long, especially when damp. Damp laundry produces moult and unpleasant smells. Moult stains cannot be removed. Sort your laundry. Study carefully the chart in this booklet explaining the symbols used on clothes labels (see...

  • Page 12

    31 to remove paint stains, for example, use a volatile substance such as turpentine: in this case, you should wait for it to dry completely before washing. The manufacturer of your washing machine is not responsible for any damage deriving from the use of volatile, inflammable or toxic substances. A...

  • Page 13: Wash Code Symbols

    32 strong wash wash delicate wash max. Wash temperature 95°c max. Wash temperature 60°c max. Wash temperature 40°c max. Wash temperature 30°c hand wash do not wash at all bleaching bleach in cold water do not bleach ironing hot iron max. 200°c warm iron max. 150°c lukewarm iron max. 110°c do not iro...

  • Page 14: Cleaning and Maintenance

    33 bodywork the outside or the machine can be cleaned with warm water and a neutral non-abrasive household detergent. Wipe with clean water and dry after cleaning. Important : do not use methylated spirit, diluents or similar products. It is advisable, from time to time, to carry out a complete cycl...

  • Page 15: If Something Doesn'T Work ?

    34 the wash results are not as usual the wash results are not as usual the wash results are not as usual the wash results are not as usual the wash results are not as usual the washing cycle is very much too long. The washing cycle is very much too long. The washing cycle is very much too long. The ...

  • Page 16

    35 the machine vibrates or is too noisy the machine empties as it fills there is water on the floor softener detergent flows out the overflow orifice if something doesn't work (continue) check that : all the transit bolts and packing have been removed. All the feet resting firmly on the ground, the ...

  • Page 17: Service

    36 if you have unable to identify or solve the problem, consult our ser vicing depar tment. Before telephoning, make a note of the make, model and date of purchase of your machine : the service department will require this information. Data plate you will find these informations on the data plate (a...

  • Page 18: For The  Installer

    37 for the installer technical information dimensions height with panel 895 mm height without panel 850 mm width 397 mm depth 600 mm power supply voltage / frequency 230 v / 50 hz total power absorbed 2300 w (10 a) heater rating 1950 w water pressure minimum 0,05 mpa (0,5 bar) maximum 0,8 mpa (8 bar...

  • Page 19

    38 installation the floor must be clean and dry, free from floor polish and other greasy substances, so that the machine does not slide about. Do not use any grease as lubrification. Installation on deep pile carpets and floor coverings with foam backings is not recommended, as the stability of the ...

  • Page 20

    39 water connection connect the water inlet hose to a cold water tap with a 3/4" gas threaded orifice, after having inserted the rugger sealing washer into the hose collar (fig.1). If the water connection is made onto new pipes or onto pipes which have not been used for a long time, it is advisable ...

  • Page 21

    146 1309 01.