En user manual 2 washer/dryer stand with drawer pdst hec.
Contents how to install the stand on your washing machine _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 how to install the stand on your tumble dryer _ _ _ _ 4 subject to change without notice how to install the stand on your washing machine warning! Do not install the stand on a washer/dryer column. ...
If the side is as shown in fig. 2, you must pick the rear brackets as in fig. 4. If, the side is as shown in fig. 3, you must pick the rear brackets as in fig. 5. Fig. 6 fig. 7 now you can proceed to fit one of the rear brackets to the left side of the stands back using the screws sup- plied (fig. 6...
The stand is now installed; check whether your washing machines back feet rest on it (fig. 16). Otherwise undo them using the key supplied with your washing machine (fig. 17). Fig. 18 fig. 19 the stands drawer, with a capacity of up to 20 kg, con- tains two dividers; they may be taken out if you wis...
In the stands drawer you will find an envelope with all the necessary material for a correct assembly. Have ready a phillips screwdriver to fit rear brackets to the stand and an torx screwdriver to fit rear brackets to the machines back. The pack includes: • 2 grey short rubber feet to be used for t...
Dx fig. 7 fig. 8 after having removed the front brackets from the stand (fig. 5), fit the rear brackets (fig. 6 and 7) to the stands back, using the screws supplied (fig. 8). Fig. 9 fig. 10 undo the two screws found left and right on the lower part of the tumble dryer back (fig. 9). Lift the machine...
7.
Www.Zanussi.Com 13 294 92 40 - 01 - 0120 10
