Summary of ZBF6124A
Page 1
En user manual 2 freezer zbf6124a.
Page 2
Contents safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 care and cleaning _ _ _...
Page 3
Or damaged power plug may overheat and cause a fire. 3. Make sure that you can come to the mains plug of the appliance. 4. Do not pull the mains cable. 5. If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire. 6. You must not operate the appliance...
Page 4
Control panel 1 2 3 4 5 1 pilot light 2 temperature regulator 3 fast freeze light 4 fast freeze switch 5 alarm light switching on insert the plug into the wall socket. Turn the temperature regulator clockwise to a medium setting. The pilot light will light up. Important! If the temperature inside th...
Page 5
Daily use freezing fresh food the freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time. To freeze fresh food activate the fast freeze function at least 24 hours before placing the food to be frozen in the freezer compartment. Place the fresh...
Page 6
• prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible subse- quently to thaw only the quantity required; • wrap up the food in aluminium foil or polythene and make sure that the packages are airtight; • do not allow fresh, unfrozen food to touch fo...
Page 7
3. Leave the door open and insert the plastic scraper in the appropriate seating at the bot- tom centre, placing a basin underneath to collect the de- frost water in order to speed up the defrosting process, place a pot of warm water in the freezer compartment. In addition, remove pieces of ice that...
Page 8
Problem possible cause solution the product temperature is too high. Let the product temperature decrease to room temperature before storage. The room temperature is too high. Decrease the room temperature. The fast freeze function is switched on. Refer to "fast freeze function". The temperature in ...
Page 9
Installation caution! Read the "safety information" carefully for your safety and correct operation of the appliance before installing the appliance. Positioning install this appliance at a location where the ambient tem- perature corresponds to the climate class indicated on the rating plate of the...
Page 10
Door reversibility the door of the appliance opens to the right. If you want to open the door to the left, do these steps before you install the appliance: • loosen the upper pin and remove the spacer. • remove the upper pin and the door. • remove the door. • loosen the lower pin. On the opposite si...
Page 11
1 2 install the appliance in the niche. Push the appliance in the direction of the arrows (1) until the upper gap cover stops against the kitchen furniture. Make sure that the distance between the appliance and the cup- board front-edge is 44 mm. Push the appliance in the direction of the arrows (2)...
Page 12
Ha hc push the part (hc) on the part (ha). Ha hb 8 mm open the appliance door and the kitchen furniture door at an angle of 90°. Insert the small square (hb) into guide (ha). Put together the appliance door and the furniture door and mark the holes. Ha k 8 mm remove the brackets and mark a distance ...
Page 13
13.
Page 14
14.
Page 15
15.
Page 16
Www.Zanussi.Com 2127 195 91 -uk-00-2 10 120 10