Zanussi ZCV68310WA User Manual - Installation
Problem
Possible cause
Remedy
Steam and condensation settle
on the food and in the oven cavity
You left the dish in the oven for
too long
Do not leave the dishes in the
oven for longer than 15-20 mi-
nutes after the cooking process
ends
The display shows “12.00”
A power cut
Reset the clock
The residual heat indicator does
not come on
The cooking zone is not hot be-
cause it operated only for a short
time.
If the cooking zone must be hot,
speak to the Service Centre.
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the oven cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
Installation
Warning! Refer to the Safety chapters.
Technical data
Dimensions
Height
894-912 mm
Width
599 mm
Depth
600 mm
Top oven capacity
37 l
Main oven capacity
69 l
Location of the appliance
You can install your freestanding appliance
with cabinets on one or two sides and in the
corner.
A
A
B
Minimum distances
Dimension
mm
A
2
B
685
19
www.zanussi.com