Summary of ZDF11001WA
Page 1
En user manual dishwasher zdf11001wa.
Page 2: Contents
Contents safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 options _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _...
Page 3: Control Panel
• before you connect the appliance to new pipes or pipes not used for a long time, let the water flow until it is clean. • the first time you use the appliance, make sure that there is no leakage. Use • this appliance is intended to be used in household and similar applications such as: – staff kitc...
Page 4: Programmes
5 half load button 6 programme knob indicators description end indicator. Salt indicator. This indicator is off while the programme operates. Rinse aid indicator. This indicator is off while the programme oper- ates. Programmes programme 1) degree of soil type of load programme phases duration (min)...
Page 5: Options
Options half-load activate or deactivate this option before the start of a programme. You cannot acti- vate or deactivate this option while a pro- gramme operates. Set this option when you want to wash a small quantity of tableware and cookware. This option decreases the programme duration and the c...
Page 6: Daily Use
4. Press . • starts to flash. • and continue to flash. • the intermittent flashing of refers to the current set level,, e.G. 5 flashes + pause + 5 flashes = level 5. 5. Press again and again to change the set- ting. Each time you press the level num- ber increases. 6. To confirm the setting and deac...
Page 7
4. Add the detergent. 5. Start the programme. Using the detergent 1 2 1 2 20 30 a b 3 20 30 4 put the detergent or the tablet in compartment (a) if the programme has a prewash phase, put a small quantity of detergent in compartment (b). Using the combi detergent tablets when you use tablets, that co...
Page 8: Hints And Tips
1. To deactivate the appliance, turn the knob until the programme marker is aligned with . 2. Close the water tap. Important • let the dishes become cold before you re- move them from the appliance. Hot dishes can be easily damaged. • first remove the items from the lower basket, then from the upper...
Page 9: Care and Cleaning
Care and cleaning warning! Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Dirty filters and clogged spray arms de- crease the washing results. Make a check regularly and, if necessary, clean them. Cleaning the filters 1 c b a 2 3 4 5 d 6 7 8 to remo...
Page 10: Troubleshooting
Troubleshooting the appliance does not start or it stops during operation. Before you contact the service, refer to the in- formation that follows for a solution to the prob- lem. With some problems, different indicators flash continuously or intermittently at the same time to show an alarm code. Al...
Page 11: Technical Information
Stains and dry water drops on glasses and dishes • the released quantity of rinse aid is not suffi- cient. Adjust the rinse aid selector to a higher position. • the quality of the detergent can be the cause. Dishes are wet • the programme is without a drying phase or with a low temperature drying ph...
Page 12
Www.Zanussi.Com/shop 1569 66970-a-2920 1 3.