1. DL manuals
  2. Zanussi
  3. Dishwasher
  4. ZDF26001WA
  5. User Manual

Zanussi ZDF26001WA User Manual

Other manuals for ZDF26001WA: User Manual

Summary of ZDF26001WA

  • Page 1

    Getting started? Easy. User manual zdf26011wa zdf26011xa en user manual dishwasher.

  • Page 2: Safety Information

    Safety information before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for fu...

  • Page 3: Safety Instructions

    • do not keep the appliance door open without supervision to prevent to fall on it. • before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket. • do not use high pressure water sprays and/or steam to clean the appliance. • the ventilation openings in t...

  • Page 4

    Model : pnc : serial number : disposal warning! Risk of injury or suffocation. • disconnect the appliance from the mains supply. • cut off the mains cable and discard it. • remove the door catch to prevent children and pets to get closed in the appliance. 4.

  • Page 5: Control Panel

    Control panel 2 1 3 4 5 1 on/off button 2 display 3 indicators 4 delay button 5 programme buttons indicators indicator description xtradry indicator. Rinse aid indicator. It is always off while the programme operates. Salt indicator. It is always off while the programme operates. 5.

  • Page 6: Programmes

    Programmes programme degree of soil type of load programme phases consumption values 1) duration (min) energy (kwh) water (l) 2) normal soil crockery and cutlery • prewash • wash 50 °c • rinses • dry 195 0.932 9.9 3) all crockery, cut- lery, pots and pans • prewash • wash from 45 °c to 70 °c • rinse...

  • Page 7: Settings

    Settings programme selection mode the appliance is in programme selection mode when the programme indicator is flashing and the display shows the programme duration. When the appliance is in programme selection mode, it is possible to set a programme and to enter the user mode. If the control panel ...

  • Page 8

    The water hardness table german degrees (°dh) french degrees (°fh) mmol/l clarke degrees water softener level 47 -50 84 - 90 8.4 - 9.0 58 - 63 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 6 19 - 22 33...

  • Page 9: Before First Use

    Deactivating the rinse aid empty notification while the appliance is in user mode: 1. Press . • the indicators and are off. • the indicator continues to flash. • the display shows the current setting: – = rinse aid empty notification activated. – = rinse aid empty notification deactivated. 2. Press ...

  • Page 10: Daily Use

    Adding rinse aid 2 1 4 3 2 1 the rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse phase. Daily use 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode. ...

  • Page 11

    • 5 minutes after the completion of the programme. • after 5 minutes if the programme has not started. Starting a programme 1. Keep the appliance door ajar. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode. 3. Press the button related ...

  • Page 12

    Option delay max. 1. Press delay until the display shows the delay time you want to set. 2. Close the appliance door, the countdown starts. The countdown starts to decrease with steps of 1 hour. When the countdown is completed the programme starts. Opening the door while the appliance operates if yo...

  • Page 13: Hints and Tips

    Hints and tips general the following hints will ensure optimal cleaning and drying results in daily use and also help to protect the environment. • remove larger residues of food from the dishes into the waste bin. • do not pre-rinse dishes by hand. When needed, use the prewash programme (if availab...

  • Page 14: Care and Cleaning

    • the programme is applicable for the type of load and for the degree of soil. • the correct quantity of detergent is used. Unloading the baskets 1. Let the tableware cool down before you remove it from the appliance. Hot items can be easily damaged. 2. First remove items from the lower basket, then...

  • Page 15: Troubleshooting

    • to maintain the performance of your appliance at its best, we recommend to use monthly a specific cleaning product for dishwashers. Follow carefully the instructions on the packaging of the product. Troubleshooting if the appliance does not start or it stops during operation. Before you contact an...

  • Page 16

    Problem and alarm code possible cause and solution small leak from the appliance door. • the appliance is not levelled. Loosen or tighten the adjustable feet (if applicable). • the appliance door is not centred on the tub. Adjust the rear foot (if applicable). The appliance door is difficult to clos...

  • Page 17

    Problem possible cause and solution there are stains and dry water drops on glasses and dishes. • the released quantity of rinse aid is not sufficient. Adjust the rinse aid level to a higher level. • the quality of the rinse aid can be the cause. The dishes are wet. • for the best drying performance...

  • Page 18: Technical Information

    Refer to "before first use", "daily use" or "hints and tips" for other possible causes. Technical information dimensions width / height / depth (mm) 600 / 850 / 625 electrical connection 1) voltage (v) 220 - 240 frequency (hz) 50 water supply pressure min. / max. Bar (mpa) 0.5 (0.05) / 8 (0.8) water...

  • Page 19

    19.

  • Page 20: Www.Zanussi.Com/shop

    Www.Zanussi.Com/shop 156901691-a-092016.