Zanussi ZDF3013 User Manual - Care And Cleaning

Page of 16

Download

Print this page

Bookmark us

• When the countdown is completed, the pro-

gramme starts.

– The indicator of the phase in operation

comes on.

Opening the door while the appliance

operates

If you open the door, the appliance stops.

When you close the door, the appliance contin-

ues from the point of interruption.

Cancelling the delay start while the

countdown operates

Press Delay again and again until the display

shows the programme duration and the phase

indicators of the set programme come on. The

programme starts.

Cancelling the programme

Press and hold Start until the programme du-

ration flashes in the display and the phase indi-

cators of the set programme come on.

Make sure that there is detergent in the

detergent dispenser before you start a

new programme.

At the end of the programme

When the programme is completed, the display

shows 0 and the phase indicators go off.

1. Deactivate the appliance. Turn the pro-

gramme knob until the programme marker is

aligned with the off position.

2. Close the water tap.

• If you do not deactivate the appliance,

after three minutes from the end of the

programme:

– All the indicators go off.

– The display shows one horizontal sta-

tus bar.

This helps to decrease the energy con-

sumption.

Press one of the buttons, the display and

the indicators come on again.

• Let the dishes become cold before you

remove them from the appliance. Hot

dishes can be easily damaged.

• First remove the items from the lower

basket, then from the upper basket.

• There can be water on the sides and on

the door of the appliance. Stainless

steel becomes cool more quickly than

the dishes.

Care and cleaning

Warning! Before maintenance, deactivate

the appliance and disconnect the mains

plug from the mains socket.

Dirty filters and clogged spray arms de-

crease the washing results.

Make a check regularly and, if necessary, clean

them.

Cleaning the filters

www.zanussi.com

« ‹ Prev 7 8 9 10 11 12 13 Next › »

Summary of ZDF3013

Page 1
En user manual dishwasher zdf3013.
Page 2: Contents
Contents safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 product description _ _ _ _ _ _ _ _ _ _ _ _ _ 3 control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 options _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _...
Page 3: Product Description
– staff kitchen areas in shops, offices and other working environments – farm houses – by clients in hotels, motels and other resi- dential type environments – bed and breakfast type environments. Warning! Risk of injury. • do not change the specification of this appli- ance. • put knives and cutler...
Page 4: Control Panel
Control panel 2 1 8 7 6 5 4 3 1 programme marker 2 off position 3 indicators 4 display 5 delay button 6 multitab button 7 start button 8 programme knob indicators description washing phase indicator. Drying phase indicator. Rinse aid indicator. This indicator is off while the programme oper- ates. S...
Page 5: Options
Programme 1) degree of soil type of load programme phases duration (min) energy (kwh) water (l) 3) all prewash 12 0.1 4 4) fresh soil crockery and cut- lery wash 65 °c rinse 30 0.9 9 1) the pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of...
Page 6
3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Processing residues can stay in the appli- ance. Start a programme to remove them. Do not use detergent and do not load the baskets. If you use the combi detergent tablets, ac- tivate the multitab function. These tablets contain detergent, r...
Page 7
Manual adjustment 1 2 turn the water hard- ness dial to the posi- tion 1 or 2. Electronic adjustment the appliance must be in setting mode. Refer to ‘setting and starting a programme’. 1. Make sure that the programme marker on the programme knob is aligned with the off position. 2. Press and hold st...
Page 8: Daily Use
1 2 max m a x 1 2 3 4 + 3 4 m a x 1 2 3 4 + to adjust the released quantity of rinse aid, turn the selector between position 1 (lowest quantity) and position 4 (highest quantity). Daily use 1. Open the water tap. 2. Turn the programme knob until the pro- gramme marker is aligned with a pro- gramme o...
Page 9
1 2 a 3 put the detergent or the tablet in compart- ment (a). A b if the programme has a prewash phase, put a small quantity of detergent in compart- ment (b). 4 detergent tablets do not fully dissolve with short programmes and detergent residues can stay on the dishes. We recommend that you use det...
Page 10: Care And Cleaning
• when the countdown is completed, the pro- gramme starts. – the indicator of the phase in operation comes on. Opening the door while the appliance operates if you open the door, the appliance stops. When you close the door, the appliance contin- ues from the point of interruption. Cancelling the de...
Page 11: Troubleshooting
3 to remove filters (b) and (c), turn the han- dle counterclockwise and remove. Pull apart filter (b) and (c). Wash the filters with water. A 4 remove filter (a). Wash the filter with water. D a 5 put filter (a) to its ini- tial position. Make sure that it assembles correctly under the two guides (d...
Page 12
Problem possible cause possible solution the appliance door is open. Close the appliance door. You did not press start. Press start. The fuse in the fuse box is damaged. Replace the fuse. The delay start is set. Cancel the delay start or wait for the end of the countdown. The appliance does not fill...
Page 13
Problem possible cause possible solution the spray arms could not turn freely. Make sure that the position of the items in the baskets is correct and does not cause the blockage of the spray arms. The quantity of detergent was not sufficient. Make sure that you add the correct quantity of detergent ...
Page 14: Technical Information
3. Release start when the display shows the setting of the water softener. 4. Turn the programme knob counterclockwise until the programme marker is aligned with the second washing programme on the control panel. 5. The display shows the setting of the rinse aid dispenser. Off on 6. Press start to c...
Page 15
15 www.Zanussi.Com.
Page 16
Www.Zanussi.Com/shop 156 963610-a-252 012.