Zanussi ZDF3023 User Manual - Options

Manual is about: Product Manaul

Page of 16

Download

Print this page

Bookmark us

Programme

Degree of soil

Type of load

Programme

phases

Duration

(min)

Energy

(kWh)

Water

(l)

Fresh soil

Crockery and cut-

lery

Wash 65 °C

Rinse

0.9

The pressure and the temperature of the water, the variations of the mains supply, the options and the

quantity of dishes can change the programme duration and the consumption values.

The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the

temperature and quantity of the water, the energy consumption and the programme duration.

This is the standard programme for test institutes. With this programme you have the most efficient use of

water and energy consumption for crockery and cutlery with normal soil.

Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and

bad odours to come out from the appliance.

Do not use detergent with this programme.

With this programme you can wash a load with fresh soil. It gives good washing results in a short time.

Information for test institutes

For all the necessary information for test performance. send an email to:

info.test@dishwasher-production.com

Write down the product number (PNC) that is on the rating plate.

Options

Multitab function

Activate this function only when you use the

combi detergent tablets.

This function deactivates the flow of rinse aid

and salt. The related indicators are off.

The programme duration can increase.

Activating the Multitab function

Activate or deactivate the Multitab function

before the start of a programme. You can-

not activate or deactivate this function while a

programme operates.

1. Press the on/off button to activate the appli-

ance.

2. Make sure that the appliance is in setting

mode. Refer to ‘SETTING AND STARTING

A PROGRAMME'.

3. Press

Multitab

, the Multitab indicator

comes on.

The function stays on until you deactivate

it. Press

Multitab

, the Multitab indicator

goes off.

If you stop to use the combi detergent

tablets, before you start to use separately

detergent, rinse aid and dishwasher salt,

do these steps:

1. Deactivate the Multitab function.

2. Set the water softener to the highest level.

3. Make sure that the salt container and the

rinse aid dispenser are full.

4. Start the shortest programme with a rinsing

phase, without detergent and without

dishes.

5. Adjust the water softener to the water hard-

ness in your area.

6. Adjust the released quantity of rinse aid.

www.zanussi.com

« ‹ Prev 2 3 4 5 6 7 8 Next › »

Summary of ZDF3023

Page 1
En user manual dishwasher zdf3023.
Page 2: Contents
Contents safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 product description _ _ _ _ _ _ _ _ _ _ _ _ _ 3 control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 options _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ...
Page 3: Product Description
Use • this appliance is intended to be used in household and similar applications such as: – staff kitchen areas in shops, offices and other working environments – farm houses – by clients in hotels, motels and other resi- dential type environments – bed and breakfast type environments. Warning! Ris...
Page 4: Control Panel
Control panel 1 8 7 6 5 2 3 4 1 programme marker 2 off position 3 indicators 4 display 5 delay button 6 multitab button 7 start button 8 programme knob indicators description washing phase indicator. Drying phase indicator. Rinse aid indicator. This indicator is off while the programme oper- ates. S...
Page 5: Options
Programme 1) degree of soil type of load programme phases duration (min) energy (kwh) water (l) 5) fresh soil crockery and cut- lery wash 65 °c rinse 30 0.9 9 1) the pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the p...
Page 6: Before First Use
Before first use 1. Make sure that the set level of the water softener agrees with the water hardness in your area. If not, adjust the water softener. Contact your local water authority to know the water hardness in your area. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the ...
Page 7
Manual adjustment 1 2 turn the water hard- ness dial to the posi- tion 1 or 2. Electronic adjustment the appliance must be in setting mode. Refer to ‘setting and starting a programme’. 1. Make sure that the programme marker on the programme knob is aligned with the off position. 2. Press and hold st...
Page 8: Daily Use
1 2 max m a x 1 2 3 4 + 3 4 m a x 1 2 3 4 + to adjust the released quantity of rinse aid, turn the selector between position 1 (lowest quantity) and position 4 (highest quantity). Daily use 1. Open the water tap. 2. Turn the programme knob until the pro- gramme marker is aligned with a pro- gramme o...
Page 9
1 2 a 3 put the detergent or the tablet in compart- ment ( a ). A b if the programme has a prewash phase, put a small quantity of detergent in compart- ment ( b ). 4 detergent tablets do not fully dissolve with short programmes and detergent residues can stay on the dishes. We recommend that you use...
Page 10: Care And Cleaning
• when the countdown is completed, the pro- gramme starts. – the indicator of the phase in operation comes on. Opening the door while the appliance operates if you open the door, the appliance stops. When you close the door, the appliance contin- ues from the point of interruption. Cancelling the de...
Page 11: Troubleshooting
3 to remove filters ( b ) and ( c ), turn the han- dle counterclockwise and remove. Pull apart filter ( b ) and ( c ). Wash the filters with water. A 4 remove filter ( a ). Wash the filter with water. D a 5 put filter ( a ) to its ini- tial position. Make sure that it assembles correctly under the t...
Page 12
Problem possible cause possible solution the programme does not start. The mains plug is not connected in the mains socket. Connect the mains plug. The appliance door is open. Close the appliance door. You did not press start . Press start . The fuse in the fuse box is damaged. Replace the fuse. The...
Page 13
Problem possible cause possible solution the spray arms could not turn freely. Make sure that the position of the items in the baskets is correct and does not cause the blockage of the spray arms. The quantity of detergent was not sufficient. Make sure that you add the correct quantity of detergent ...
Page 14: Technical Information
3. Release start when the display shows the setting of the water softener. 4. Turn the programme knob counterclockwise until the programme marker is aligned with the second washing programme on the control panel. 5. The display shows the setting of the rinse aid dispenser. Off on 6. Press start to c...
Page 15
570-600 mm 600 mm 820 mm 1 make sure that the dimensions of the recess agree with the dimensions in the figure. 1 2 2 3 4 3 4 loosen or tighten the adjustable feet for a cor- rect level of the appliance. With a correct level the appliance door closes and seals correctly. Install the appliance workto...
Page 16
Www.Zanussi.Com/shop 156 959590-a-032 011.