User manual dishwasher zdi 600 qx.
Thank you for selecting our appliance we wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document. The user ...
Safety information in the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, in- cluding its hints and warnings. To avoid unnecessary mistakes and accidents, it is im- portant to ensure that all people using the ap...
Installation • check your dishwasher for any transport damage. Never connect a damaged ma- chine. If your dishwasher is damaged con- tact your supplier. • all packaging must be removed before use. • any electrical and plumbing work required to install this appliance must be carried out by a qualifie...
Important! A sequence of displayed and audible signals will guide you in the setting up of the appliance, the selection of washing programmes and options. Follow the instruc- tions that appear in the display. Scrolling button this button has a double function: • selecting within "programme menu", • ...
Option menu option submenu eco dry allows you to shorten the drying phase to only 15 minutes. It is not available with all washing programmes (see "washing programmes" chart) on off extra rinse adds another rinse phase to set programmes. Not available with all washing pro- grammes (see "washing prog...
Gramme: prewash - main wash - rinses - drying. 2. In this row several details are displayed: – setting mode guide to the selection of the washing programme - duration time of the programme, options (when together with the washing programme one or more options are set, the update of the programme dur...
Cancel a delay start or a washing programme in progress 1. Press simultaneously both option and de- lay start buttons. 2. The message confirm cancel ? Is displayed. 3. Press ok button to confirm. 4. The appliance returns to setting mode and the message choose programme is displayed. • if a delay sta...
Programme degree of soil type of load programme description 55° quick normal soil crockery and cutlery main wash 1 intermediate rinse final rinse 70° intensive heavy soil crockery, cutlery, pots and pans prewash main wash 2 intermediate rinses final rinse drying 50° eco 3) normal soil crockery and c...
• ensure that the electrical and water connec- tions comply with the installation instructions • remove all packaging from inside the appli- ance • set the water softener • pour 1 litre of water inside the salt container and then fill with dishwasher salt • fill the rinse aid dispenser if you want t...
The water softener must be set in both ways: manually, using the water hardness dial and electronically. Setting the water softener manually (see table) set switch to position 1 or 2 the water softener is factory set at position 2. Setting electronically the dishwasher is factory set at level 5. Ent...
Remove any trace of salt. Replace the cap tightly turning it clockwise until it stops with a click. Important! Immediately start a complete programme. Important! Water will overflow from the container as salt is added. Important! The salt container will require topping up periodically. You are remin...
Adjusting the dosage of rinse aid increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce the dose if there are whitish streaks on the dishes or a bluish film on glassware or knife blades. Open the lid. Set the dosage level. (the dose is factory set in po- sit...
For washing in the dishwasher the following cutlery and dishes are not suitable: are of limited suitability: • cutlery with wooden, horn, china or mother-of- pearls handles. • plastic items that are not heat resistant. • older cutlery with glued parts that are not tempera- ture resistant. • bonded c...
Load the lower basket. Ar- range serving dishes and large lids around the edge of the basket. The two rows of prongs on the lower basket can be easily lowered to allow you to load pots, pans and bowls. Load upper basket. Light items (plastic bowls etc.) must be loaded in the up- per basket and arran...
To move to the higher position proceed as follows: 1. Pull out the basket until it stops. 2. Carefully lift both sides upwards until the mecha- nism is engaged and the basket is stable. To lower the basket to the original position proceed as follows: 1. Pull out the basket until it stops. 2. Careful...
For programmes with pre- wash add an additional detergent dose in com- partmentb. When using detergent tablets: place detergent tablets in compartment a. Close the lid. Detergent tablets detergent tablets from different manufacturers dissolve at different rates. For this reason, some detergent table...
If the drying results are not satisfactory we suggest that you: 1. Fill up the rinse aid dispenser with rinse aid. 2. Activate the rinse aid dispenser. 3. Set the rinse aid dosage to position 2. • the activation/deactivation of the rinse aid dispenser can only be possible with the "multitab" functio...
Clean filters a, b and c thoroughly under running water. Turn the handle about 1/4 turn anticlockwise and re- move filters b and c. Remove filter a from the base of the washing com- partment. Replace the filters and lock by turning the handle clockwise to the stop. Cleaning the spray arms never try ...
2. Leave the door ajar to prevent the forma- tion of any unpleasant smells. 3. Leave the inside of the machine clean. Frost precautions avoid placing the machine in a location where the temperature is below 0°c. If this is unavoidable, empty the machine, close the ap- pliance door, disconnect the wa...
What to do if… the dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications de- scribed in the chart, without calling out an engineer. Switch off the dishwasher, open the door a...
Once these checks have been carried out; close the dishwasher’s door and switch on the appliance. Press the button of the programme that was running before the intervention of the alarm. The programme will continue from the point at which it was interrupted. If the malfunction or fault code reappear...
Technical data dimensions width x height x depth (cm) 59,6 x 81,8-89,8 x 57,5 electrical connection voltage - overall power - fuse information on the electrical connection is given on the rating plate on the inner edge of the dishwasher’s door. Water supply pressure minimum maximum 0,05 mpa (0,5 bar...
Hints for test institutes testing in accordance with en 60704 must be carried out with appliance fully loaded and us- ing the test programme (see "consumption values"). Test in accordance with en 50242 must be carried out when the salt container and rinse aid dispenser have been filled with salt and...
This dishwasher is designed to be fitted under a kitchen counter or work surface. No further openings for the venting of the dishwasher are required, but only to let the wa- ter fill and drain hose and power supply cable pass through. The dishwasher incorporates adjustable feet to allow the adjustme...
Drain hose connect drain hose to the sink. Required height: 30 to 100 cm above bottom of the dishwasher. Ensure that the hoses are not kinked, crushed or en- tangled. When connecting the drain hose to an under sink trap spigot, the entire plastic membrane (a) must be removed. Fail- ure to remove all...
27.
Www.Electrolux.Com www.Zanussi-electrolux.Co.Uk 117972120-012008.
