Zanussi ZDI 6053 QA Instruction Book

Manual is about: DISHWASHER ZDI 6053 QA

Summary of ZDI 6053 QA

  • Page 1

    Dishwasher zdi 6053 qa instruction book gb.

  • Page 2: Contents

    2 safety instructions 2 description of the appliance 4 the control panel 4 prior to using for the first time 5 setting the water softener 5 filling with salt 5 rinse aid 6 in daily use 7 loading cutlery and dishes 7 the lower basket 7 the cutlery basket 8 the upper basket 8 adjusting the height of t...

  • Page 3: Disposal

    3 it is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new o...

  • Page 4: The Control Panel

    The control panel 4 1. Water hardness adjustment 2. Levelling spacers 3. Upper basket stop 4. Salt container 5. Lower spray arm 6. Detergent dispenser 7. Control panel 8. Rating plate 9. Rinse aid dispenser 10. Large filter 11. Central filter 12. Upper spray arm 13. Upper basket description of the a...

  • Page 5

    5 before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions. 2. Remove all packaging from inside the appliance. 3. Set the water softener. 4. Pour 1 litre of water inside the salt container and then fill with salt. ...

  • Page 6

    6 rinse aid rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setti...

  • Page 7: In Daily Use

    7 ● check if it’s necessary to refill with special salt or rinse aid ● load cutlery and dishes into the dishwasher. ● fill with dishwasher detergent . ● select a wash programme suitable for the cutlery and dishes. ● start the wash programme. Loading cutlery and dishes sponges, household cloths and a...

  • Page 8

    8 the cutlery basket long bladed knives stored in an upright position are a potential hazard. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Take care when loading or unloading sharp items such as knives. Cutlery should be placed in the...

  • Page 9

    9 use of detergent only use detergents specifically designed for use in dishwashers. Using no more then the correct amount of detergent contributes to reducing pollution. Fill with detergent prior to the start of a wash programme. The detergent is released during the washing phase. Please observe th...

  • Page 10: Washing Programmes

    10 washing programmes (1) testing programme for en 50242 (see "hints for test centres). This programme, developed for the use of detergents with enzymes, allows to achieve, with reduced consumption of energy the same cleaning results that would otherwise be obtained only with the 65°c programmes and...

  • Page 11: Starting A Washing Programme

    11 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Turn on the water tap 3. Close the dishwasher door 4. Setting and starting the programme turn the programme selector dial clockwise until the programme marker on the knob corresponds with the program...

  • Page 12: Maintenance and Cleaning

    12 clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Ensure that the seals around the door, the detergent and rinse aid dispensers ...

  • Page 13: What to Do, When...

    13 what to do, when... Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer. Once the checks have been carried out, close the door and press the on/off push button, the programme wi...

  • Page 14

    14 if after all these checks, the problem persists, contact your local consumer services department, quoting the model (mod.), product number (pnc) and serial number (s.N.). This information can be found on the rating plate located on the right hand side of the dishwasher door (see picture). So that...

  • Page 15: Installation Instructions

    15 any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Building-in this dish...

  • Page 16

    16 water outlet hose connection the end of the drain hose can be connected in the following ways: 1. To the sink outlet spigot, securing it if necessary with a clip. 2. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm ...

  • Page 17: Hints For Test Centres

    17 testing in accordance with en 60704 must be carried out with appliance fully loaded and using the test programme (see "washing programmes" chart). Test in accordance with en 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respecti...

  • Page 20

    Subject to change without notice 152972 34/0 from the electrolux group. The world’s no.1 choice. The electrolux group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million electrolux group products (such as refrigerators, cookers, vacuum cl...