- DL manuals
- Zanussi
- Dishwasher
- ZDI 6053 SX
- User Manual
Zanussi ZDI 6053 SX User Manual
Summary of ZDI 6053 SX
Page 1
User manual dishwasher zdi 6053 156998710en.Qxp 12/4/2006 11:15 am page 1.
Page 2: Content
2 content safety information - - - - - - - - - - - - - - - - - - -3 control panel and functions - - - - - - - - - - - -4 programme table - - - - - - - - - - - - - - - - - - -6 before the first use - - - - - - - - - - - - - - - - - -6 setting the water softener - - - - - - - - - - - - -7 filling with...
Page 3: Correct Use
Correct use ● this dishwasher is only intended for washing household utensils suitable for machine washing. ● do not put any solvents in the dishwasher. This could cause an explosion. ● knives and other items with sharp points must be loaded in the cutlery basket with their points down or placed in ...
Page 4: Control Panel and Functions
Control panel and functions ● never use the dishwasher if the electrical supply cable and water hoses are damaged; or if the control panel, work top or plinth area are damaged such that the inside of the appliance is freely accessible. Contact your local service force centre, in order to avoid hazar...
Page 5
5 wash indicator lights end illuminates when the washing and rinsing phases are running. Illuminates when a washing programme has ended. Switch of the dishwasher by returning the programme selector dial to the off position. The on/off indicator light turns off. It also has added functions of visual ...
Page 6: Programme Table
Programme use cycle description 6 programme table intensive 70°c heavy soil. Prewash - main wash a crockery, cutlery, 2 intermediate rinses - pots and pans final rinse - dry rinse & hold any. Prewash e partial load (to be completed later in the day). This programme does not require the use of deterg...
Page 7: Setting The Water Softener
7 setting the water softener the dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance. The softener should be adjusted according to the hardness of the water in you...
Page 8: Filling With Dishwasher Salt
8 setting the water softener electronically (see table) release the button. The end indicator light will flash. The number of flashes corresponds to current level set. The end indicator light might flash 5 times, for example. The flashing is repeated every 5 seconds. To change the level, press the s...
Page 9: Filling With Rinse Aid
9 remove any trace of salt. Replace the cap tightly turning it clockwise until it stops with a click. Important! Immediately start a complete programme. Important! The salt container will require topping up periodically. Filling with rinse aid open the lid. Fill up with rinse aid. The maximum level ...
Page 10: Loading Cutlery and Dishes
10 adjusting the dosage of rinse aid increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce the dose if there are whitish streaks on the dishes or a bluish film on glassware or knife blades. Open the lid. Set the dosage level. (the dose is factory set in posi...
Page 11
11 load cutlery. For best results we recommend you to use the cutlery grid provided (if the size and dimensions of the cutlery allow it). Place knives and other items of cutlery with sharp points or edges with their handles facing upwards. Risk of injury! Load the lower basket. Arrange serving dishe...
Page 12: Filling With Detergent
12 filling with detergent open the lid. Fill in the detergent in compartment a. Observe the dosing levels. Important! Only use detergents suitable for dishwashers. Observe the manufacturer’s dosing and storage recommendations. For programmes with prewash add an additional detergent dose in compartme...
Page 13: Unloading The Dishwasher
13 unloading the dishwasher ● empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. ● water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishe...
Page 14: External Cleaning
14 external cleaning clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Ensure that the seals around the door, the detergent and rin...
Page 15: Something Not Working
15 something not working important! The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer. Switch off the dishwash...
Page 16
16 the wash results are not satisfactory the dishes are not clean ● the wrong washing programme has been selected. ● the dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. ● the spray arm do not rotate freely due to wrong arrang...
Page 17: Technical Data
17 technical data dimensions width 596 cm height 81,8 - 87,8 cm depth. 57,5 cm water supply pressure minimum 0,05 mpa maximum 0,8 mpa electrical connection information on the electrical connection is given on the rating plate on voltage - overall power - fuse the inner edge of the dishwasher’s door....
Page 18: Installation
18 installation warning! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Warning! The dishwasher must not be connected to open water appliances or instantaneous water heaters. This dishwasher ...
Page 19: Inlet Hose
19 caution! If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. Inlet hose connect the inlet hose to a water tap with an external thread of 3/4”. The inlet hose can be turned either t...
Page 20: Fitting Under A Counter
20 warning! ● multi-way plugs, connectors and extension cables must not be used. This could constitute a fire hazard through overheating. ● if necessary, have the domestic wiring system socket replaced. In case that the electrical cable has to be replaced, contact your local service force centre. ● ...
Page 21: Guarantee/customer Service
21 guarantee/customer service standard guarantee conditions we, zanussi-electrolux , undertake that if within 12 months of the date of the purchase this zanussi-electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our optio...
Page 22: Customer Care
22 customer care for general enquiries concerning your electrolux appliance, or for further information on electrolux products please contact our customer care department by letter or telephone at the address below or visit our website at www.Electrolux.Co.Uk customer care department electrolux majo...
Page 23: Www.Electrolux.Com
23 www.Electrolux.Com albania +35 5 4 261 450 rr. Pjeter bogdani nr. 7 tirane belgique/belgië/belgien +32 2 363 04 44 bergensesteenweg 719, 1502 lembeek danmark +45 70 11 74 00 sjællandsgade 2, 7000 fredericia eesti +37 2 66 50 030 mustamäe tee 24, 10621 tallinn france www.Electrolux.Fr hellas +30 2...
Page 24
Subject to change without notice 156998 71/0 12/06 www.Electrolux.Com 156998710en.Qxp 12/4/2006 11:16 am page 24.