Summary of ZDI12001
Page 1
En user manual dishwasher zdi12001.
Page 2
Contents safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 daily use _ ...
Page 3
• do not keep the appliance door open without supervi- sion to prevent to fall on it. • do not sit or stand on the open door. • dishwasher detergents are dangerous. Obey the safety instructions on the detergent packaging. • do not drink and play with the water in the appliance. • do not remove the d...
Page 4
3 indicators 4 delay button 5 start button 6 programme knob indicators description washing phase indicator. Drying phase indicator. End indicator. Salt indicator. This indicator is off while the programme operates. Programmes programme 1) degree of soil type of load programme phases duration (min) e...
Page 5
3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Processing residues can stay in the appliance. Start a programme to remove them. Do not use detergent and do not load the baskets. Adjusting the water softener hard water contains a high quantity of minerals that can cause damage to the appl...
Page 6
4. To adjust the level of the water softener, press the start button. Each time you press the start button you go to the next level. 5. To confirm the setting, turn the programme knob until the programme marker is aligned with the on/off indi- cator. Filling the salt container caution! Only use dish...
Page 7
Daily use 1. Open the water tap. 2. Turn the programme knob until the programme mark- er is aligned with the programme you want to set. Make sure that the appliance is in setting mode. Refer to ’setting and starting a programme’. Set the correct programme for the type of load and soil. • if the salt...
Page 8
When you use tablets, that contain salt and rinse aid, do not fill the salt container and the rinse aid dispenser. The rinse aid indicator always comes on if the rinse aid dis- penser is empty. 1. Adjust the water softener to the lowest level. 2. Set the rinse aid dispenser to the lowest position. I...
Page 9
2. Open the appliance door. 3. Close the water tap. • for better drying results, keep the appliance door ajar for some minutes. • let the dishes become cold before you remove them from the appliance. Hot dishes can be easily damaged. • first remove the items from the lower basket, then from the uppe...
Page 10
First try to find a solution to the problem (refer to the ta- ble). If not, contact the service. With some problems, some indicators flash continuously and/or intermittently at the same time to show an alarm code. Alarm code problem • the start indicator flashes continuously. • the end indicator fla...
Page 11
If the problem occurs again, contact the service. If other alarm codes show, contact the service. The washing results and drying results are not satisfactory problem possible cause possible solution the dishes are not clean. The filters are clogged. Clean the filters. The filters are not correctly a...
Page 12
Problem possible cause possible solution the dishes are wet and matt. The rinse aid dispenser is empty. Make sure that there is rinse aid in the rinse aid dispenser. The quality of the rinse aid can be the cause. Try a different brand of rinse aid. Technical information dimensions width / height / d...
Page 13
13.
Page 14
14.
Page 15
15.
Page 16
Www.Zanussi.Com/shop 1569 57950-a-352011.