- DL manuals
- Zanussi
- Dishwasher
- ZDM 4714
- Instruction Booklet
Zanussi ZDM 4714 Instruction Booklet
Summary of ZDM 4714
Page 1
Dishwasher myČka nÁdobÍ zdm 4714 instruction booklet nÁvod k pouŽtÍ 152989 98/0 cs en.
Page 2: Contents
For the user guide to use the instruction book 2 important safety information 3 description of the appliance 4 the control panel 5 before use 6 setting the water softener 6 rinse aid 8 use of detergent 9 using your appliance 10 loading your appliance 10 adjusting the height of the upper basket 11 hi...
Page 3: Important Safety Information
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new own...
Page 4: Description of The Appliance
Description of the appliance 4 pda10gb in21 1 2 3 5 7 8 6 9 10 11 4 1. Water hardness adjustment 2. Levelling spacers 3. Upper basket stop 4. Large filter 5. Salt container 6. Rinse aid dispenser 7. Detergent dispenser 8. Control panel 9. Central filters 10. Lower spray arm 11. Upper spray arm 12. U...
Page 5: The Control Panel
1. On/off indicator light 2. On/off pushbutton on by depressing this button the machine starts operating and, at the same time the on/off indicator light illuminates. Off when the washing programme has finished, the machine stops automatically and the pilot light remains on. To switch the indicator ...
Page 6: Before Use
Before using your dishwasher for the first time: 1 ensure that the electrical and water connections comply with the installation instructions 2 remove all packaging from inside the appliance 3 set the water softener 4 fill the salt container 5 fill the rinse aid dispenser. Setting the water softener...
Page 7
Filling with salt only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in dishwasher, specially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes (not the rinse ...
Page 8
Rinse aid rinse aid is automatically added during the last rinse, ensuring through rinsing, spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. Fil...
Page 9
Use of detergent only use detergents specifically designed for use in dishwashers. To fill the dishwasher with detergent proceed as follows: 1. Open the dispenser lid by pulling the catch (d). 2. Add the detergent according to the recommendations in the programme chart. As all detergents are not the...
Page 10: Using Your Appliance
Loading your appliance before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. Open the door and slide out the baskets to load the dishes. The lower bask...
Page 11
The upper basket the upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses; glasses with long stems can be placed upside down in the raised cup racks. Larger plates (dinner plates up to 24 cm in diameter) must be loaded...
Page 12: Hints and Tips
To save energy place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. If necessary run the rinse and hold programme (see programme chart on the following pages), so that any food scraps do not become caked on the dishes while you are waiting to...
Page 13: Washing Programmes
Normal 65° no prewash washing programmes 13 pwp27gb programme degree of soil and type of load normal soil. Crockery, cutlery pots and pans light soil. Crockery and cutlery light soil. Crockery and party crockery any. Partial load (to be completed later in the day). Starting position of the programme...
Page 14: Operating Sequence
1. Check the filters ensure they are clean and properly positioned (see cleaning instructions). 2. Check that there is rinse aid and salt 3. Load the dishes remove any scraps of food. Pull the lower basket out and arrange the saucepans, plates and cutlery in it. Pull the upper basket out and arrange...
Page 15: Maintenance and Cleaning
Internal cleaning ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend you carry out a maintenance wash every three months, by running a 65°c programme without dishes using detergent. Cleaning the central filters (after e...
Page 16
External cleaning clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Prolonged periods of non-operation if you are not using the mac...
Page 17: Something Not Working
Symptom solution the machine will not start ■ the door has not been properly closed. ■ the plug is not properly inserted in the power socket. ■ there is not current at the socket. The dishwasher does not fill with water ■ ensure the water tap is open. ■ ensure the mains water supply has not been cut...
Page 18
If after all these checks, the problem persists, contact your local service force centre, quoting the model and serial number. This information can be found on the rating plate located on the right hand side of the dishwasher door (see picture). Protection against flooding in order to prevent water ...
Page 19: Installation Instruction
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Installation instruction 19 pts21gb dimensions width 44....
Page 20
Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Water supply connections this dishwasher may be fed with either hot (max. 60°) or cold water. Nevertheless we advise you a cold water supply. A hot water supply is not always effic...
Page 21
Water outlet hose connection the end of the drain hose can be connected in the following ways: 1. To the sink outlet siphon, securing it if necessary with a clip. 2. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm (mi...
Page 22: Building-In
This dishwasher is designed to be fitted under a kitchen counter or worksurface. It is essential that the recess dimensions indicated in the diagram are followed. No further openings for venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass...
Page 23
The furniture door the door on this appliance is designed for the overlay of a panel having the following dimensions: width 446 cm height 594 mm max thickness 20 mm max weight 1,5 - 6 kg max the panel height should be no more than indicated, otherwise complete opening of the door will no longer be p...
Page 24
Securing under a counter secure the dishwasher to the counter on the front part by means of two 3.5 x 16 screws provided (see fig. - point a). Important: the dishwasher must be secured against tilting. Therefore, make sure that the counter it is fitted under, is suitably secured to a fixed structure...
Page 25
0 08/98.