- DL manuals
- Zanussi
- Dishwasher
- ZDS 679 EX
- Instruction Booklet
Zanussi ZDS 679 EX Instruction Booklet
Summary of ZDS 679 EX
Page 1
Lavavajillas dishwasher maquina de lavar loiÇa zds 679 ex manual de instrucciones instruction booklet instruÇÕes de utilizaÇÃo 152989 07/0 pt en es.
Page 2: Attention
The appliance which you have just bought is supplied not only with this instruction manual, but also with a warranty card certificate, on the back of which are written the relative conditions. Please fill in the necessary details on the card certificate and send it to the zanussi centre relative to ...
Page 3: Contents
For the user important safety information 29 description of the appliance 30 the control panel 31 before use 33 setting the water softener 33 rinse aid 35 use of detergent 36 using your appliance 37 loading your appliance 37 adjusting the height of the upper basket 39 hints and tips 40 washing progr...
Page 4: Important Safety Information
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new own...
Page 5: Description of The Appliance
Description of the appliance 30 pda09gb in75 1 2 3 4 5 6 12 11 10 7 8 9 1. Levelling spacers 2. Upper basket stop 3. Salt container 4. Lower spray arm 5. Detergent dispenser 6. Control panel 7. Rating plate 8. Rinse aid dispenser 9. Large filter 10. Central filter 11. Upper spray arm 12. Upper baske...
Page 6: The Control Panel
1. On/off indicator light this comes on when the on/off pushbutton is depressed, indicating that the machine is on. 2. On/off pushbutton press this button to preset the dishwasher to accept settings (selection of a wash programme, economy drying, etc.). The number "3" appears in the digital display....
Page 7
6. Economy drying by pressing this button you can opt to shorten or completely eliminate the hot air drying cycle, so making a considerable energy saving. Eco drying no drying if programme nr. 7 is selected the indicator light "no drying" will come on for default but it is posssible to change the se...
Page 8: Before Use
Before using your dishwasher for the first time: ensure that the electrical and water connections comply with the installation instructions remove all packaging from inside the appliance set the water softener fill the salt container fill the rinse aid dispenser. Setting the water softener the dishw...
Page 9
Filling with salt if your water is "level 0" it is already soft and therefore there is no need to use salt. Salt must be used from level 1 upward. Only use salt specifically designed for use in dishwasher. All other types of salt not specifically designed for use in dishwasher, specially table salt,...
Page 10
Rinse aid rinse aid is automatically added during the last rinse, ensuring through rinsing, spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. Fil...
Page 11
Use of detergent only use detergents specifically designed for use in dishwashers. To fill the dishwasher with detergent proceed as follows: 1. Open the dispenser lid by pulling the catch (d). 2. Add the detergent according to the recommendations in the programme chart. As all detergents are not the...
Page 12: Using Your Appliance
Loading your appliance before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. Open the door and slide out the baskets to load the dishes. The lower bask...
Page 13
The upper basket the upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses; glasses with long stems can be placed upside down in the raised cup racks. Larger plates (dinner plates up to 24 cm in diameter) must be loaded...
Page 14
Adjusting the height of the upper basket if washing very large plates (over 27 cm and up to 31 cm in diameter) you can load them in the lower basket after moving the upper basket. Never lift or lower the basket on one side only. To move to the higher position proceed as follows: 1. Pull out the bask...
Page 15: Hints and Tips
To save energy place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. If necessary run the rinse and hold programme (see programme chart on the following pages), so that any food scraps do not become caked on the dishes while you are waiting to...
Page 16: Washing Programmes
Washing programmes 41 pwp12gb programme degree of soil and type of load normal soil. Crockery, cutlery pots and pans heavy soil. Crockery, cutlery pots and pans light soil. Crockery, cutlery pots and pans normal soil. Crockery and cutlery light soil. Crockery and party crockery light soil. Delicate ...
Page 17: Operating Sequence
1. Check the filters ensure they are clean and properly positioned (see cleaning instructions). 2. Press the on/off pushbutton 3. Check that there is rinse aid and salt the indicator lights will flash if refilling is necessary. 4. Load the dishes remove any scraps of food. Pull the lower basket out ...
Page 18: Maintenance and Cleaning
Internal cleaning ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend every 3 months to run a 65°c wash programme without dishes using detergent. Cleaning the central filter (after each wash) scraps of food may accumulat...
Page 19
Check that the sid is not clogged with detergent residue. If necessary, rinse it under running water after having removed it from the basket by twisting it anticlockwise and pulling it upwards. Refit the dispenser by following the above instructions in reverse order. Fasten it back onto the support ...
Page 20: Something Not Working
Symptom fault code solution the machine will not start ■ the door has not been properly closed (open door indicator light flashes). ■ the plug is not properly inserted in the power socket. ■ check the plug fuse. ■ there is no current at the socket. The machine does not fill indicator light ■ ensure ...
Page 21
Symptom solution the dishes are not clean ■ the baskets are too full. (poor wash) ■ the dishes have not been arranged properly. ■ the spray arms do not rotate. ■ the spray arms are clogged. ■ the filters are clogged. ■ the filters are not in position. ■ not enough detergent has been used or it is un...
Page 22: Installation Instruction
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Installation instruction 47 pts13gb dimensions width 59....
Page 23
Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Water supply connections this dishwasher may be fed with either hot (max. 60°) or cold water. Nevertheless we advise you a cold water supply. A hot water supply is not always effic...
Page 24
Water outlet hose connection the end of the drain hose can be connected in the following ways: 1. To the sink outlet siphon, securing it if necessary with a clip. 2. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm (mi...
Page 25: Building-In
It is essential that the recess dimensions indicated in the diagram are followed. No further openings for venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass through. The recess height may be anywhere between 820 and 880 mm from the floor...
Page 26
Adjusting the door balance when the dishwasher door is correctly balanced it will remain in position when left ajar. Fitting the decor panel may sometimes affect this balance. In this case it will be necessary to adjust the balance as follows: half-open the door and regulate the screws located on th...
Page 27
Kitchen plinth adjustment to allow correct opening of the door it is sometimes necessary to cut the kitchen plinth. Refer to the cutting table. According to dimensions (a) and (b) as shown on the figure, you will find on the following table the depth (x) of the cut to be made on the plinth. The dime...
Page 28
0 05/98.