Zanussi ZDT 21001FA User Manual

Summary of ZDT 21001FA

  • Page 1

    Getting started? Easy. User manual zdv12002fa en user manual dishwasher.

  • Page 2: Safety Information

    Safety information before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. General safety • ...

  • Page 3: Safety Instructions

    Been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. • do not let children play with the appliance. • keep all detergents away from children. • keep children and pets away from the appliance door when it is open. • cleaning and user...

  • Page 4

    Disposal warning! Risk of injury or suffocation. • disconnect the appliance from the mains supply. • cut off the mains cable and discard it. • remove the door catch to prevent children and pets to get closed in the appliance. 4.

  • Page 5: Easy Start

    Easy start 4 3 2 1 1 on/off button 2 programme indicators 3 indicators 4 programme button indicators end indicator. Salt indicator. It is always off while the programme operates. Programmes programme degree of soil type of load programme phases consumption values 1) duration (min) energy (kwh) water...

  • Page 6: Settings

    Programme degree of soil type of load programme phases consumption values 1) duration (min) energy (kwh) water (l) 4) all • prewash 14 0.1 4 1) the pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 2) with thi...

  • Page 7

    User mode while the appliance is in programme selection mode: 1. Press and hold programme button until the indicator starts to flash and the indicator is on. In user mode can be changed: • the level of the water softener according to the water hardness. • the activation or the deactivation of the ac...

  • Page 8: Before First Use

    German degrees (°dh) french degrees (°fh) mmol/l clarke degrees water softener level 11 - 14 19 - 25 1.9 - 2.5 13 - 17 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 2 1 2) 1) factory setting 2) do not use salt at this level. Activating the acoustic signal for the end of programme by default this acoustic signal ...

  • Page 9: Daily Use

    Adding salt before first use put one litre of water in the salt container. Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after you fill the salt container, start a programme. Adding rinse aid 2 1 1 2 3 4 a 2 1 the rinse aid helps to dry the d...

  • Page 10

    Adding multi-tablets 2 1 20 30 • do not fill the salt container and the rinse aid dispenser. • adjust the water softener to the lowest level. • set the rinse aid dispenser to the lowest position. Starting a programme 1. Keep the appliance door ajar. 2. Press the on/off button to activate the applian...

  • Page 11: Hints and Tips

    Hints and tips general the following hints will ensure optimal cleaning and drying results in daily use and also help to protect the environment. • remove larger residues of food from the dishes into the waste bin. • do not pre-rinse dishes by hand. When needed, use the prewash programme (if availab...

  • Page 12: Care and Cleaning

    • there is dishwasher salt and rinse aid (unless you use combi detergent tablets). • the position of the items in the baskets is correct. • the programme is applicable for the type of load and for the degree of soil. • the correct quantity of detergent is used. Unloading the baskets 1. Let the table...

  • Page 13: Troubleshooting

    • do not use abrasive products, abrasive cleaning pads or solvents. Internal cleaning • carefully clean the appliance, including the rubber gasket of the door, with a soft moist cloth. • if you regularly use short duration programmes, these can leave deposits of grease and limescale inside the appli...

  • Page 14: Technical Information

    The washing and drying results are not satisfactory problem possible solution there are whitish streaks or blu- ish layers on glasses and dishes. • the release quantity of rinse aid is too much. Adjust the rinse aid selector to a lower position. • the quantity of detergent is too much. There are sta...

  • Page 15: Environmental Concerns

    Environmental concerns recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household was...

  • Page 16: Www.Zanussi.Com/shop

    Www.Zanussi.Com/shop 156975980-d-162014.