- DL manuals
- Zanussi
- Dishwasher
- ZDT 6894
- Instruction Book
Zanussi ZDT 6894 Instruction Book
Summary of ZDT 6894
Page 1
GeschirrspÜler dishwasher zdt 6894 bedienungsanleitung instruction book d gb.
Page 2: Contents
19 safety instructions 20 description of the appliance 21 the control panel 21 prior to using for the first time 22 setting the water softener 22 filling with salt 23 rinse aid 23 in daily use 24 loading cutlery and dishes 24 the lower basket 25 the cutlery basket 25 the upper basket 26 adjusting th...
Page 3: Disposal
20 it is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new ...
Page 4: The Control Panel
The control panel 21 1. Levelling spacers 2. Upper basket stop 3. Upper spray arm 4. Salt container 5. Large filter 6. Detergent dispenser 7. Control panel 8. Rating plate 9. Rinse aid dispenser 10. Central filter 11. Lower spray arm 12. Upper basket 13. "sid" detergent dispenser (super intensity di...
Page 5
22 before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions. 2. Remove all packaging from inside the appliance. 3. Set the water softener. 4. Pour 1 litre of water inside the salt container and then fill with salt....
Page 6
23 to select a different level proceed as follows: 1. With the machine switched on, press "half load" and "drying options" push buttons simultaneously for about 5 seconds. In the multi-display appears an l followed by a number (e.G. L 4) which corresponds to the current level. 2. Press within 5 seco...
Page 7: In Daily Use
24 top up the rinse aid when the rinse aid indicator light on the control panel illuminates. In case rinse aid refilling is necessary, during the run of the programme the rinse aid indicator light will remain off. Only with the door open and the machine switched on it will illuminate. Adjusting the ...
Page 8
25 open the door and slide out the baskets to load the dishes. The lower basket the lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc. Serving dishes and large lids should be arranged around the edge of the basket, ensuring that the upper spray arm can turn freely. T...
Page 9
26 the upper basket the upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 25 cm in diameter), salad bowls, cups and glasses. Arrange items on and underneath the cup racks so that water can reach all surfaces. Glasses with long stems can be placed upside down in the...
Page 10
27 use of detergent only use detergents specifically designed for use in dishwashers. Using no more then the correct amount of detergent contributes to reducing pollution. Fill with detergent prior to the start of a wash programme. The detergent is released during the washing phase. Please observe t...
Page 11: Washing Programmes
28 washing programmes (1) ideal for washing a complete load of 12 place settings with normal soil. Characterised by a duration of about 80 minutes and a washing temperature of 65°c. The time value is approximate and depends on the pressure and the temperature of the water and also by the variations ...
Page 12: Starting A Washing Programme
29 in this fully integrated appliance, the controls are located on the top of the door. When selecting a programme, the door needs to be slightly open. 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Turn on the water tap 3. Press the on/off push but...
Page 13: Maintenance and Cleaning
30 clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Ensure that the seals around the door, the detergent and rinse aid dispensers ...
Page 14: What to Do, When...
31 what to do, when... Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer. ...A flashing fault code appears the dishwasher will not start or stops during operation. All push butto...
Page 15
32 ...The wash results are not satisfactory the dishes are not clean ● the wrong washing programme has been selected. ● the dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. ● the spray arms do not rotate freely due to wrong ar...
Page 16: Installation Instructions
33 any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Building-in this dish...
Page 17
34 electrical connection information concerning the electrical connection is given on the rating plate on the edge of the dishwasher’s door on the right. Before plugging the appliance into the wall socket, make sure that: 1. The mains voltage and current rating at the site of installation match the ...
Page 18: Hints For Test Centres
35 testing in accordance with en 60704 must be carried out with appliance fully loaded and using the test programme (see "washing programmes" chart). Test in accordance with en 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respecti...
Page 19
Änderungen vorbehalten subject to change without notice 152972 29/0 from the electrolux group. The world’s no.1 choice. The electrolux group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million electrolux group products (such as refrigerat...