Zanussi ZDT110 User Manual - Hints For Test Institutes

Other manuals for ZDT110: User Manual
Manual is about: Dishwasher ZDT 110

Summary of ZDT110

  • Page 1

    User manual dishwasher zdt110

  • Page 2: Appliance

    Thank you for selecting our appliance we wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document. The user ...

  • Page 3: Safety Information

    Safety information in the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, in- cluding its hints and warnings. To avoid unnecessary mistakes and accidents, it is im- portant to ensure that all people using the ap...

  • Page 4: Installation

    Installation • check your dishwasher for any transport damage. Never connect a damaged ma- chine. If your dishwasher is damaged con- tact your supplier. • all packaging must be removed before use. • any electrical and plumbing work required to install this appliance must be carried out by a qualifie...

  • Page 5: Setting Mode

    Setting mode the appliance is in setting mode when all programme lights are off and end of pro- gramme light flashes. Important! Always remember that when performing opera- tions such as: • selecting a washing programme • setting the water softener • deactivation/activation of the audible signals th...

  • Page 6: Audible Signals

    Indicator lights end of programme indicator light illuminates when the washing programme has ended. It also has added functions of visual signalling as: – the setting of the water softener, – deactivation/activation of the audible signals, – intervention of an alarm due to the malfunction of the mac...

  • Page 7: Washing Programmes

    Washing programmes programme use cycle description normal 65° normal soil. Crockery and cutlery prewash main wash 2 intermediate rinses final rinse dry 65°a30' light soil. Crockery and cutlery main wash final rinse 50° normal soil. Crockery cutlery prewash main wash 1 intermediate rinse final rinse ...

  • Page 8: Salt Function and Other

    Salt function and other additives: there is no need to fill up with special salt or rinse aid. Check whether these detergents are suitable for your water hardness. Follow the manufac- turers instructions. – set the water hardness to level 1. Important! If the drying results are not satisfactory we r...

  • Page 9: Setting The Water Softener

    Water hardness adjusting the water hardness setting use of salt °dh °th mmol/l manually electronically 11 - 14 19 - 25 1,9 - 2,5 1 level 3 yes 4 - 10 7 - 18 0,71 - 1,8 1 level 2 yes 1 level 1 no setting the water softener manually (see table) set switch to position 1 or 2 the water softener is facto...

  • Page 10: Use of Dishwasher Salt

    Use of dishwasher salt caution! Use only special salt suitable for dishwashers. Unscrew the cap. Only before filling with salt for the first time, fill the salt container with wa- ter. Using the funnel provided, pour in the salt until the container is filled with salt. Remove any trace of salt. Repl...

  • Page 11: Filling With Rinse Aid

    Filling with rinse aid open the lid. Fill up with rinse aid. The maximum level for filling is indicated by "max" clean up any rinse aid which overflows. Close the lid and press until it locks. Top up the rinse aid indica- tor (b) becomes clear caution! Never fill the rinse aid dispenser with any oth...

  • Page 12: Loading Cutlery and Dishes

    Open the lid. Set the dosage level. (the dose is factory set in po- sition 4). Close the lid and press un- til it locks. Loading cutlery and dishes sponges, household cloths and any object that can absorb water may not be washed in the dishwasher. • before loading the dishes, you should: – remove al...

  • Page 13

    For washing in the dishwasher the following cutlery and dishes are not suitable: are of limited suitability: • cutlery with wooden, horn, china or mother-of- pearls handles. • plastic items that are not heat resistant. • older cutlery with glued parts that are not tempera- ture resistant. • bonded c...

  • Page 14: Adjusting The Height of The

    Load upper basket. Light items (plastic bowls etc.) must be loaded in the up- per basket and arranged so they do not move. For taller items, the cup racks can be folded up- wards. If plates are to be loaded in the upper basket: load them starting from the rear positions; tilting them slightly forwar...

  • Page 15: Use of Detergent

    Use of detergent important! Only use detergents suitable for dishwashers. Observe the manufacturer’s dosing and stor- age recommendations. Open the lid. Fill in the detergent in compartment a. Observe the dosing lev- els. For programmes with pre- wash add an additional detergent dose in com- partmen...

  • Page 16: Care and Cleaning

    • water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes. Caution! When the washing programme has finished, it is recommended that the dishwasher is un- plugged and the water tap turned off. Care and cleaning cleaning the fil...

  • Page 17: Cleaning The Spray Arms

    Cleaning the spray arms never try to remove the spray arms. If residues of soil have clogged the holes in the spray arms, remove them with a cocktail stick. External cleaning clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents...

  • Page 18: Packaging Material

    Household waste disposal service or the shop where you purchased the product. Packaging material the packaging materials are environmentally friendly and can be recycled. The plastic com- ponents are identified by markings, e.G. >pe >ps materials in the appropriate container at the community waste d...

  • Page 19

    Fault code and malfunction possible cause and solution the programme does not start. • the dishwasher door has not been properly closed. Close the door. • the main plug is not plugged in. Insert the mains plug. • the fuse has blown in the household fuse box. Replace the fuse. Once these checks have ...

  • Page 20: Consumption Values

    The wash results are not satisfactory there are streaks, milky spots or a bluish coating on glasses and dishes • decrease rinse aid dosing. Water drops have dries onto glasses and dishes • increase rinse aid dosing. • the detergent may be the cause. Contact the de- tergent manufacturer’s consumer ca...

  • Page 21: Hints For Test Institutes

    Electrical connection voltage - overall power - fuse information on the electrical connection is given on the rating plate on the inner edge of the dishwasher’s door. Water supply pressure minimum - maximum (mpa) 0,05 - 0,8 capacity place settings 12 max. Weight kg 37 noise level db(a) 51 hints for ...

  • Page 22: Installation

    Cup racks: position a installation warning! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or compe- tent person. Water connection warning! The dishwasher must not be connected to open water appliances or instant...

  • Page 23: Drain Hose

    Warning! The electrical cable for the safety valve is in the double-walled water inlet hose and is live. Therefore do not immerse the water inlet hose or the safety valve in water. Take care when installing the water inlet hose . Place the water inlet hose in such a way that it is always lower than ...

  • Page 24: Electrical Connection

    Electrical connection caution! Safety standards require the appliance to be earthed. Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be fo...

  • Page 25

    25.

  • Page 26

    26.

  • Page 27

    27.

  • Page 28

    Www.Electrolux.Com 156997241-00-022008.