Summary of ZDT26010FA
Page 1
Getting started? Easy. User manual zdt26010fa en user manual dishwasher.
Page 2: Safety Information
Safety information before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for fu...
Page 3: Safety Instructions
• do not keep the appliance door open without supervision to prevent to fall on it. • before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket. • do not use high pressure water sprays and/or steam to clean the appliance. • the ventilation openings in t...
Page 4
• when you contact the authorised service centre, ensure that you have the following information that is available on the rating plate. Model : pnc : serial number : disposal warning! Risk of injury or suffocation. • disconnect the appliance from the mains supply. • cut off the mains cable and disca...
Page 5: Easy Start
Easy start 1 3 4 5 6 7 8 9 2 1 on/off button 2 display 3 programme button (up) 4 programme button (down) 5 half load button 6 xtradry button 7 delay button 8 cancel button 9 indicators indicators end indicator. Salt indicator. It is always off while the programme operates. Rinse aid indicator. It is...
Page 6: Settings
Programme degree of soil type of load programme phases consumption values 1) duration (min) energy (kwh) water (l) p4 quick a30 min 5) fresh soil crockery and cutlery • wash 60 °c or 65 °c • rinses 30 0.9 9 p5 delicate normal or light soil delicate crock- ery and glass- ware • wash 45 °c • rinses • ...
Page 7
When the appliance is in programme selection mode it is possible to set a programme. If the control panel does not show this condition, do the cancel. Cancel function press and hold cancel until the appliance is in programme selection mode. With this function you can cancel the running programme or ...
Page 8
• the indicator continues to flash. • the display shows the current setting: e.G. = level 5. 2. Press to change the setting. Each time you press the button, the level increases. After level 10 you will start again from level 1. 3. Press the on/off button to confirm the setting. If you use multi-tabl...
Page 9: Before First Use
– = rinse aid empty notification activated. – = rinse aid empty notification deactivated. 2. Press to change the setting. 3. Press on/off button to confirm the setting. When rinse aid chamber is empty, the rinse aid indicator is turned on notifying to refill rinse aid. If you are using multitabs con...
Page 10: Daily Use
Adding salt before first use put one litre of water in the salt container. Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after you fill the salt container, start a programme. Adding rinse aid 2 1 4 3 2 1 the rinse aid helps to dry the dishes ...
Page 11
Adding multi-tablets 2 1 20 30 • adjust the water softener to the lowest level. The auto off function this function decreases energy consumption by deactivating automatically the appliance when it is not operating. The function comes into operation: • 5 minutes after the completion of the programme....
Page 12
Option xtradry activate this option when you want to boost the drying performance. With the use of this option, the duration of some programmes, water consumption and the last rinse temperature can be affected. Thextradry option is not a permanent option and must be selected at every cycle. This opt...
Page 13: Hints and Tips
If you open the door before the activation of auto off, the appliance is automatically deactivated. Hints and tips general the following hints will ensure optimal cleaning and drying results in daily use and also help to protect the environment. • remove larger residues of food from the dishes into ...
Page 14: Care and Cleaning
Before starting a programme make sure that: • the filters are clean and correctly installed. • the cap of the salt container is tight. • the spray arms are not clogged. • there is dishwasher salt and rinse aid (unless you use multi- tablets). • the position of the items in the baskets is correct. • ...
Page 15: Troubleshooting
Internal cleaning • carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth. • if you regularly use short duration programmes, these can leave deposits of grease and limescale inside the appliance. To prevent this, we recommend to run long duration programmes a...
Page 16
Problem and alarm code possible cause and solution the program lasts too long. • if the delayed start option is set, cancel the delay setting or wait for the end of the countdown. The remaining time in the dis- play increases and skips nearly to the end of program time. • this is not a defect. The a...
Page 17
Problem possible cause and solution there are whitish streaks or blu- ish layers on glasses and dishes. • the release quantity of rinse aid is too much. Adjust the rinse aid level to a lower level. • the quantity of detergent is too much. There are stains and dry water drops on glasses and dishes. •...
Page 18: Technical Information
Technical information dimensions width / height / depth (mm) 596 / 818 - 898 / 555 electrical connection 1) voltage (v) 220 - 240 frequency (hz) 50 water supply pressure min. / max. Bar (mpa) 0.5 (0.05) / 8 (0.8) water supply cold water or hot water 2) max 60 °c capacity place settings 13 power cons...
Page 19
19.
Page 20: Www.Zanussi.Com/shop
Www.Zanussi.Com/shop 156902180-a-502015.