Summary of ZDT6453
Page 1
GeschirrspÜler dishwasher zdt 6453 bedienungsanleitung instruction book d gb.
Page 2: Contents
19 safety instructions 20 disposal 20 economical end ecological dishwashing 20 description of the appliance 21 the control panel 21 prior to using for the first time 22 setting the water softener 22 filling with salt 23 rinse aid 24 in daily use 25 loading cutlery and dishes 25 the lower basket 25 t...
Page 3: Disposal
20 it is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new ...
Page 4: The Control Panel
The control panel 21 1. Upper basket stop 2. Water hardness switch 3. Salt container 4. Detergent dispenser (type a / type b) 5. Control panel 6. Rating plate 7. Rinse aid dispenser (type a / type b) 8. Filters 9. Lower spray arm 10. Upper spray arm 11. Upper basket description of the appliance in14...
Page 5
22 audible signals audible signals have been introduced to help indicate which operations the dishwasher is performing: "end of programme" "set of the water softener" "something not working with the machine" to deactivate the audible signals 1. With the dishwasher switched off, press the on/off push...
Page 6
23 setting electronically the dishwasher is factory set at level 5. If it’s necessary to set a new level, proceed as follows. 1. With the dishwasher switched off, press the on/off push button, all indicator lights of the programme push buttons will illuminate (setting mode). 2. Press simultaneously ...
Page 7
24 rinse aid rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage sett...
Page 8: In Daily Use
● check if it’s necessary to refill with special salt or rinse aid ● load cutlery and dishes into the dishwasher. ● fill with dishwasher detergent . ● select a wash programme suitable for the cutlery and dishes. ● start the wash programme. Loading cutlery and dishes sponges, household cloths and any...
Page 9
26 cutlery should be placed in the removable cutlery basket with the handles facing downwards. If the handles protrude from the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles facing upwards. Mix spoons with other cutlery to prevent them from sticking togethe...
Page 10
27 use of detergent only use detergents specifically designed for use in dishwashers. Using no more then the correct amount of detergent contributes to reducing pollution. Prior to the start of a wash programme. The detergent is released during the washing phase. Please observe the manufacturer’s do...
Page 11: Washing Programmes
28 washing programmes programme degree of soil and type of load heavy soil. Crockery, cutlery, pots and pans normal soil. Crockery and cutlery normal soil. Crockery and cutlery fresh soil. Crockery and cutlery press the programme button cycle description (3) consumption values hot prewash main wash ...
Page 12: Starting A Washing Programme
29 in this fully integrated appliance the controls are located on the top of the door. When selecting a programme, the door needs to be open. 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Turn on the water tap 3. Press the on/off push button all th...
Page 13: Maintenance and Cleaning
30 clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Ensure that the seals around the door, the detergent and rinse aid dispensers ...
Page 14: What to Do, When...
31 what to do, when... Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer. ...A flashing fault code appears the dishwasher will not start or stops during operation. All push butto...
Page 15
32 ...The wash results are not satisfactory the dishes are not clean ● the wrong washing programme has been selected. ● the dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. ● the spray arms do not rotate freely due to wrong ar...
Page 16: Installation Instructions
33 any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Building-in this dish...
Page 17
34 water outlet hose connection the end of the drain hose can be connected in the following ways: 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. 2. To a stand pipe provided with vent-hole, minimum ...
Page 18: Hints For Test Centres
35 testing in accordance with en 60704 must be carried out with appliance fully loaded and using the test programme (see "washing programmes" chart). Test in accordance with en 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respecti...
Page 19
Änderungen vorbehalten subject to change without notice 152971 61/0 from the electrolux group. The world’s no.1 choice. The electrolux group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million electrolux group products (such as refrigerat...