Zanussi ZDTS401 User Manual - Use of Dishwasher Salt
Water hardness
Water hardness setting
°dH
°TH
mmol/l
Clarke
manually
electronically
29 - 36
51 - 64
5,1 - 6,4
36 - 45
2
7
23 - 28
40 - 50
4,0 - 5,0
28 - 35
2
6
19 - 22
33 - 39
3,3 - 3,9
23 - 27
2
5
15 - 18
26 - 32
2,6 - 3,2
18 - 22
1
4
11 - 14
19 - 25
1,9 - 2,5
13 - 17
1
3
4 - 10
7 - 18
0,7 - 1,8
5 - 12
1
2
< 4
< 7
< 0,7
< 5
1
1
1)
1) No use of salt required.
You must set the water softener manually and
electronically.
Manual adjustment
The appliance is set at the factory at position 2.
1
2
Set switch to position 1 or
2.
Electronic adjustment
The dishwasher is factory set at level 5.
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold function buttons B and C until the
indicator lights of function buttons A, B and C start
to flash.
4. Release function buttons B and C.
5. Press function button A.
– The indicator lights for function buttons B and C
go off.
– The indicator light for function button A contin-
ues to flash.
– The digital display shows the current level.
– You can hear an audible signal.
Example: digital display shows
/ 5 intermittent
audible signals = level 5.
6. Press the function button A one time to increase
the water softener level by one step.
7. Press the on/off button to save the operation.
Use of dishwasher salt
Caution! Only use dishwashers salt. Types of
salt that are not applicable for dishwashers cause
damage to the water softener.
8