Zanussi ZEI6640XBA User Manual

Other manuals for ZEI6640XBA: User Manual, User Manual
Manual is about: Product Manaul

Summary of ZEI6640XBA

  • Page 1

    En user manual induction hob zei6640xba.

  • Page 2

    Contents safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 installation instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 operating instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 care a...

  • Page 3

    Installation instructions before the installation, note down the serial number (ser. Nr.) from the rating plate.The rating plate of the appliance is on its lower casing. Zei6640xba 949 595 535 00 58 gad d5 au zanussi 220-240 v 50-60 hz 7,4 kw induction 7,4 kw the safety instructions warning! You mus...

  • Page 4

    Assembly min. 50mm min. 50mm min. 500mm min. 5mm = = 490 +1mm 560 +1mm 600 mm r 5 mm 4.

  • Page 5

    Min. 25 mm min. 5 mm min. 20 mm min. 38 mm min. 5 mm if you use a protection box (the additional accesso- ry 1) ), the front airflow space of 5 mm and protective floor directly below the appliance are not necessary. You can not use the protection box if you install the appli- ance above an oven. Pro...

  • Page 6

    Control panel layout 1 2 3 8 9 7 5 4 6 use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sensor field function 1 it activates and deactivates the appliance. 2 it locks and unlocks the control panel. 3 it activates the power function. 4 ...

  • Page 7

    Display description the power function operates. The automatic switch-off operates. Residual heat indicator warning! The risk of burns from residual heat! The induction cooking zones make the heat necessary for cooking directly in the bottom of the cookware. The glass ceramic is hot from the heat of...

  • Page 8

    Automatic heat up 1 2 3 4 5 6 7 8 9 10 11 0 1 2 3 4 5 6 7 8 9 you can get the necessary heat setting in a shorter time if you activate the automatic heat up function. This function sets the highest heat setting for some time (see the graph- ic), and then decreases to the necessary heat setting. To s...

  • Page 9

    Lock when the cooking zones operate, you can lock the control panel, but not . It prevents an accidental change of the heat setting. First set the heat setting. To start this function touch . The symbol comes on for 4 seconds. The timer stays on. To stop this function touch . The heat setting that y...

  • Page 10

    Heat setting use to: time hints 1 keep warm the food you cooked as re- quired put a lid on a cookware 1-2 hollandaise sauce, melt: butter, chocolate, ge- latine 5-25 min mix from time to time 1-2 solidify: fluffy omelettes, baked eggs 10-40 min cook with a lid on 2-3 simmer rice and milkbased dishes...

  • Page 11

    What to do if… problem possible cause and remedy you cannot activate the appliance or operate it. • activate the appliance again and set the heat setting in 10 seconds. • you touched 2 or more sensor fields at the same time. Only touch one sensor field. • the child safety device or the lock operates...

  • Page 12

    If you tried the above solutions and cannot repair the problem, speak to your dealer or the customer service. Give the data from the rating plate, three digit letter code for the glass ceramic (it is in the corner of the glass sur- face) and an error message that comes on. Make sure, you operated th...

  • Page 13

    13.

  • Page 14

    14.

  • Page 15

    15.

  • Page 16

    Www.Zanussi.Com/shop 8929 47624- b- 072012.