Zanussi ZEV6240FBA User Manual

Other manuals for ZEV6240FBA: User Manual
Manual is about: Product Manaul

Summary of ZEV6240FBA

  • Page 1

    En user manual hob zev6240fba.

  • Page 2

    Contents safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 installation instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 operating instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 care a...

  • Page 3

    The safety instructions warning! You must read these! • make sure that the appliance is not damaged because of transportation. Do not connect a damaged appliance. If it is necessary, speak to the supplier. • only an authorized servicing technician can install, connect or repair this appliance. Use o...

  • Page 4

    Assembly min. 50mm min. 50mm min. 500mm 1 2 = = 490 +1mm 560 +1mm 600 mm r 5 mm 4.

  • Page 5

    Min. 25 mm min. 20 mm min. 38 mm 5.

  • Page 6

    Product description general overview 210 mm 180 mm 145 mm 145 mm 1 2 4 5 3 1 cooking zone 1200 w 2 cooking zone 1800 w 3 cooking zone 1200 w 4 control panel 5 cooking zone 2300 w control panel layout 1 2 4 3 use the sensor fields to operate the appliance. The displays and indicators tell which funct...

  • Page 7

    Display description the automatic switch off operates. Residual heat indicator warning! The risk of burns from residual heat! The induction cooking zones make the heat necessary for cooking directly in the bottom of the cookware. The glass ceramic is hot from the heat of the cookware. Operating inst...

  • Page 8

    Heat setting use to: time hints 1 keep warm the food you cooked as re- quired put a lid on a cookware 1-2 hollandaise sauce, melt: butter, chocolate, ge- latine 5-25 min mix from time to time 1-2 solidify: fluffy omelettes, baked eggs 10-40 min cook with a lid on 2-3 simmer rice and milkbased dishes...

  • Page 9

    What to do if… problem possible cause and remedy you cannot activate the appliance or operate it. • activate the appliance again and set the heat setting in 10 seconds. • you touched 2 or more sensor fields at the same time. Only touch one sensor field. • there is water or fat stains on the control ...

  • Page 10

    10

  • Page 11

    11.

  • Page 12

    Www.Zanussi.Com/shop 8929 51773-a-402011.