DL manuals
Zanussi
Hob
ZGF 993 ITXC
Instruction Book

Zanussi ZGF 993 ITXC Instruction Book

Page of 10

Download

Print this page

Bookmark us

•

This appliance has been designed to be operated by

adults and children under supervision. Young children

MUST

NOT

be allowed to tamper with the controls or

play near or with the oven.

•

This appliance has been designed for cooking

edible foodstuff and to be used for domestic non-

professional purposes only. It must not be used for

any other purpose.

•

It is dangerous to alter the specification in any way.

•

For hygiene and safety reasons, this appliance should

be kept clean at all times. A build-up of fats or other

foodstuff could result in a fire.

•

Accessible parts of this appliance may become hot

when it is in use. Children should be

KEPT

AWAY

until

it has cooled.

•

Under no circumstances should you attempt to repair

the appliance yourself. Repairs carried out by

unexperienced persons may cause injury or serious

malfunctioning. Refer to your local Zanussi Service

Centre. Always insist on genuine Zanussi spare

parts.

•

Ensure that all control knobs are in the OFF position

when not in use.

•

Should you connect any electrical tool to a plug near

this cooking appliance, ensure that electric cables

are not in contact with it and keep them far enough

from the heated parts of this appliance.

•

If the appliance is out of order, disconnect it from the

electric supply.

These instructions are only for the countries stated by the symbol

printed on the front cover of this instruction book.

This appliance complies with the following

E.E.C. Directives:

73/23 - 90/683 (Low Voltage Directive);

89/336 (Electromagnetical Compatibility Directive);

90/396 (Gas Appliances)

93/68 (General Directives)

and subsequent modifications.

During Operation

About Installation, Cleaning

and Manteinance

•

It is mandatory that all operations required for the

installation are carried out by a qualified or competent

person, in accordance with existing rules and

regulations.

•

Disconnect the appliance from the electrical supply,

before carrying out any cleaning or manteinance

work.

•

Ensure a good ventilation around the appliance. A

poor air supply could cause lack of oxygen.

•

Ensure that the gas supply complies with the gas

type stated on the identification label, placed near

the gas supply pipe.

•

Using a gas cooking appliance will produce heat

and moisture in the room which it has been

installed in. Ensure a continuous air supply,

keeping the air vents in good conditions or

installing a cooker hood with discharge tube.

•

In case of intensive or long time use of the

appliance, make the ventilation more efficient,

by opening a window or increasing the electric

exhaust fan power.

•

Once you removed all packaging from the appliance,

ensure that it is not damaged and the electric cable

is in perfect conditions. Otherwise, contact your

dealer before proceeding with the installation.

•

The manufacturer disclaims any responsability

should all the safety measures not be carried

out.

☛

ENGLISH

MANUFACTURER:

ELECTROLUX ZANUSSI S.p.A.

Viale Bologna 298 - 47100 FORLI’ (Italy)

For Your Safety

These warnings are provided in the interest of safety. You

MUST

read them carefully before

installing or using the appliance.

It is most important that this instruction book should be retained with the appliance for future

reference. Should the appliance be sold or transferred, always ensure that the book is left with

the appliance in order that the new owner can get to know the functions of the appliance and

the relevant warnings.

1 2 3 4 5 6 7 Next › »

Summary of ZGF 993 ITXC

Page 1
36 • this appliance has been designed to be operated by adults and children under supervision. Young children must not be allowed to tamper with the controls or play near or with the oven. • this appliance has been designed for cooking edible foodstuff and to be used for domestic non- professional p...
Page 2: 1. Instruction For The User
37 1. Instruction for the user hob burners control knobs the hob burners control knobs are situated on the hob front panel. The symbols on the knobs mean that : ● there is no gas supply there is maximum gas supply there is minimum gas supply lighting the burners • for easier lighting, proceed before...
Page 3
38 the hob broiler the model zgf 993 itxc is supplied with an electric broiler situated in the central zone of the hob. To switch on the broiler, turn the relevant control knob to the required heat setting. The control knob is numbered 0 (off) - 8 (maximum). The broiler may smoke a little and produc...
Page 4: 2. Cleaning and Maintenance
39 fo 2347 fo 2032 fig. 2 fig. 3 2. Cleaning and maintenance • disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work. Wash the enamelled components with warm soapy water. Never use abrasive cleaners frequently wash the "caps" and the "crowns" with ...
Page 5: 3. Technical Data
40 fo 2365 3. Technical data gas burners rating double crown burner 3,5 kw rapid burner (big) 3 kw (g20) - 2,8 kw (g30-31) auxiliary burner (small) 1 kw semirapid burner (medium) 2 kw electric broiler 1 kw class 3 appliance category ii 2e+3+ setting natural gas 20 mbar / g25 25 mbar gas connection g...
Page 6: 5. Electrical Connection
41 the appliance is designed to be connected to 230 v monophase electricity supply. The connection must be carried out in compliance with the laws and regulations in force. Before the appliance is connected: 1) check that the main fuse and the domestic installation can support the load (see the rati...
Page 7
42 injectors replacement • remove the pan supports. • remove the burner's caps and crowns. • with a socket spanner 7 unscrew and remove the injectors (fig. 7), and replace them with the ones required for the type of gas in use (see table 2). • reassemble the parts, following the same procedu- re bac...
Page 8: 7. Building In
43 fitting the lid we recommend the lid hinge block are fitted before installing the hob into the worktop. To install the lid onto the hob, proceed as follows: a. Remove the right and left hand grid blocks fitted to the back of the hob, by unscrewing the relevant screws (fig. 10) b. Fit the lid hing...
Page 9
44 installation and assembly these hobs can be installed in a kitchen unit with an opening for insertion whose dimensions are shown in fig. 13. The edge of the cut out must have a minimum distance from the rear wall of 55 mm. If there are side walls, or sides of the furniture unit near the hob, the ...
Page 10
45 480 30 591 380 140 360 cm 2 50 cm 2 120 cm 2 180 cm 2 30 20 min 60 a b possibilities for insertion kitchen unit with door proper arrangements must be taken in designing the forniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. The recomm...