1. DL manuals
  2. Zanussi
  3. Hob
  4. ZGF982C
  5. Instruction Booklet

Zanussi ZGF982C Instruction Booklet

Other manuals for ZGF982C: Instruction Booklet
Manual is about: Gas hobs

Summary of ZGF982C

  • Page 1

    Gas hobs zgf982c instruction booklet please read this instruction booklet before using the appliance gb.

  • Page 2

    2 this appliance complies with the following e.E.C. Directives: * 73/23 - 90/683 (low voltagedirective); * 93/68 (general directives); * 89/336 (electromagnetical compatibility directive); * 90/396 (gas appliances), and subsequent modifications important safety information you must read hese warning...

  • Page 3

    3 for the user contents for the installer 1. Auxiliary burner 2. Semi-rapid burners 3. Ultra-rapid double-crown burner 4. Rapid burner 5. Control knobs 2 1 3 4 5 2 description of the hob important safety information 2 description of the hob 3 operation 4 maintenance and cleaning 4 something not work...

  • Page 4

    4 maintenance and cleaning operation hob burners to light a burner: l push in the relevant control knob and turn it anticlockwise to maximum position; l then adjust the flame as required. If the burner does not ignite, turn the control knob to zero, and try again. To ensure maximum burner efficiency...

  • Page 5

    5 cast iron pan supports the hob has cast iron pan supports. Take care when removing them. They are fair heavy and could damage the hob or your kitchen furniture if you let them fall down. To keep the pan supports in the correct position, they are hooked into hinges at the back of the hob. When remo...

  • Page 6

    6 in the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local zanussi service force centre by telephoning: 0870 5 929929 your telephone call will be automatically routed to the service force centre covering your post code area. The addresses ar...

  • Page 7

    7 zanussi service force to contact your local zanussi service force centre telephone 08705 929 929 channel islands guernsey guernsey electricity po box 4 vale, guernsey channel islands jersey jersey electricity company po box 45 queens road st helier jersey channel islands je4 8ny scotland aberdeen ...

  • Page 8

    8 zanussi service force to contact your local zanussi service force centre telephone 08705 929 929 midlands birmingham 66 birch road east (m18) wyrley road ind. Estate witton birmingham b6 6db bourne manning road ind. Estate (m44) pinfold road bourne pe10 9ht bridgnorth 68 st. Mary’s street (m72) br...

  • Page 9

    9 burner rapid semi-rapid auxiliary (large) (medium) (small) position max min max min max min max min nominal thermal power kw 3.0 0.65 2.0 0.45 1.0 0.33 3.5 1.2 nominal flow rate m 3 /h 0.286 0.062 0.190 0.043 0.095 0.031 0.333 0.114 nozzle reference 119 adjust. 96 adjust. 70 adjust. 136 adjust. No...

  • Page 10

    10 fitting the gas hob without a cooker hood above fitting the gas hob with a cooker hood above 700 mm 400 mm 400 mm 100 mm 55 mm 50 mm 50 mm 600 mm 700 mm 400 mm 400 mm 100 mm 55 mm 600 mm 50 mm 50 mm fo 2369* fo 2231* important safety requirements this hob must be installed in accordance with the ...

  • Page 11

    11 on/off switch flex outlet on/off switch flex outlet fo 0763 fo 0764 30 20 min 60 a b fo 1013 1 2 3 fo 2348 dimensions are given in mm. Building in building over a cupboard or drawer if the hob is to be installed above a cupboard or drawer it will be necessary to fit a heat resistant board below t...

  • Page 12

    12 electrical connections any electrical work required to install this hob should be carried out by a qualified electrician or competent person, in accordance with the current regulations. This hob must be earthed. The manufacturer declines any liability should these safety measures not be observed....

  • Page 13

    13 fault finding preliminary electrical systems check a. Earth continuity check - appliance must be electrically disconnected - meter set on (ohms) x 1 scale and adjust zero if necessary. A) test leads from any appliance earth point to earth pin on plug. Resistance should be less than 0.1 (ohm), che...

  • Page 14

    14 ignition system / gas ignition yes check plug top fuse and replace if necessary check polarity and earth continuity of supply point check earth continuity of appliance ignitor does not spark check fitting of burners check position of the electrode check by pass simmer adjusted light burner manual...

  • Page 15

    15 commissioning when the hob has been fully installed it will be necessary to check the minimum flame setting. To do this, follow the procedure below. - turn the gas tap to the max position and ignite. - set the gas tap to the min flame position then turn the control knob from min to max several ti...

  • Page 16

    35672-5603 12/00 grafiche mdm - forlì customer care zanussi 55-77 high street slough berkshire, sl1 1dz tel: 08705 727727 © electrolux household appliances limited 2000 from the electrolux group. The world’s no.1 choice. The electrolux group is the world’s largest producer of powered appliances for ...