- DL manuals
- Zanussi
- Hob
- ZGG 643
- Operating Instructions Manual
Zanussi ZGG 643 Operating Instructions Manual
Summary of ZGG 643
Page 1
Газовая варочная панель Руководство пользователя zgg 643 zgg 646 operating instuctions gas hob.
Page 2
2 welcome to the world of electrolux thank you for choosing a first class product from electrolux, which hopefully will provide you with lots of pleasure in the future. The electrolux ambition is to offer a wide variety of quality products that make your life more comfortable. You find some examples...
Page 3: Contents
3 this appliance is manufactured according to the following eec directives: 2006/95 eec - 93/68 eec - 89/336 eec - 90/396 eec, current edition. Guide to use the instructions the following symbols will be found in the text to guide you throughout the instructions: safety instructions step by step ins...
Page 4: During Operation
4 during operation • this appliance has been designed for non professional purpose in private houses only. It is meant to cook edible foodstuff only and must not be used for any other purposes. • it is dangerous to alter the specification in any way. • for hygiene and safety reasons, this appliance ...
Page 5
5 • accessible parts of this appliance may become hot when it is in use. Children should be kept away until it has cooled. • children can also injure themselves by pulling pans or pots off the hob. About installation, cleaning and manteinance • it is mandatory that all operations required for the in...
Page 6: Description of The Hob
6 1. Hob top 2. Rapid burner 3. Semi-rapid burner 4. Auxiliary burner 5. Control knob for back right burner (semi-rapid) 6. Control knob for back left burner (semi-rapid) 7. Control knob for front left burner (rapid) 8. Control knob for front right burner (auxiliary) description of the hob 1 3 3 5 6...
Page 7: Hob Burners
7 hob burners to light a burner: z turn the relevant knob anticlockwise to maximum position and push down the knob to ignite. Z after lighting the flame, keep the knob pushed down for about 5 seconds. This will allow the "thermocouple" (fig. 2 - lett. D) to be heated and the safety device to be swit...
Page 8: Burner
8 burner minimum maximum diameter diameter large (rapid) 160 mm 260 mm medium (semi-rapid) 120 mm 220 mm small (auxiliary) 80 mm 160 mm as soon as a liquid starts boiling, turn down the flame so that it will barely keep the liquid simmering. Use only pans or pots with flat bottom. If you use a sauce...
Page 9: The Pan Supports
9 before any maintenance or cleaning can be carried out, you must disconnect the hob from the electricity supply. The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool. This appliance cannot be cleaned with steam or with a steam cleaning m...
Page 10: Periodic Maintenance
10 periodic maintenance periodically ask your local service centre to check the conditions of the gas supply pipe and the pressure adjuster, if fitted. Ignition electrode the electric ignition is obtained through a ceramic "electrode" and a metal electrode (fig. 1 - letter c). Keep these components ...
Page 11: Something Not Working?
11 something not working? If the hob is not working correctly, please carry out the following checks before contacting your local electrolux service force centre. Symptom there is no spark when lighting the gas. The gas ring burns unevenly. Solution check that the unit is plugged in and the electric...
Page 12: Overall Dimensions Width:
12 overall dimensions width: 580 mm depth: 510 mm cut out dimensions width: 550 mm depth: 470 mm appliance class 3 supply connections gas: rc 1/2 inch (1/2 inch male) rear right hand corner electric: 230 v ~ 50 hz supply, 3 core flexible cable heat input rear left burner 1.9 kw (semi rapid) front le...
Page 13
13 type burner injectors normal reduced normal feeding of gas power power power pressure 1/100 mm kw kw m3/h g/h mbar rapid 119 2,9 0,75 0,276 - semi-rapid 96 1,9 0,45 0,181 - 20 auxiliary 70 1,0 0,33 0,095 - rapid 86 2,7 0,75 - 196 semi-rapid 71 1,9 0,45 - 138 30 auxiliary 50 1,0 0,33 - 73 rapid 12...
Page 14: Gas Connection
14 z the following instructions about installation and maintenance must be carried out by qualified personnel in compliance with the regulation in force. Z the appliance must be electrically disconnected before all interventions. If any electric supply to the appliance is required to carry out the w...
Page 15: Natural Gas
15 connection using flexible non metal pipes when the connection can be easily inspected in its full extent, there is the chance to use a flexible pipe according to the rules in force. The flexible pipe must be tightly fixed using clamps according to the rules in force. Always insert the gasket «b»....
Page 16: Electrical Connection
16 the appliance is designed to be connected to 230 v monophase electricity supply. The connection must be carried out in compliance with the laws and regulations in force. Before the appliance is connected: 1) check that the main fuse and the domestic installation can support the load (see the rati...
Page 17: Injectors Replacement
17 injectors replacement • remove the pan supports. • remove the burner's caps and crowns. • with a socket spanner 7 unscrew and remove the injectors (fig. 5), and replace them with the ones required for the type of gas in use (see table 2:injectors). • reassemble the parts, following the same proce...
Page 18: Building In
18 building in a = auxiliary burner sr = semi-rapid burner r = rapid burner dimensions are given in millimeters fig. 7 cut out size the dimensions of the cut-out are given in the picture. The hob can be inserted in a built-in kitchen unit whose depth is between 550 mm and 600 mm. The hobs dimensions...
Page 19
19 fitting the hob to the worktop before fitting the hob into the cut out, an adhesive seal must be fitted to the underside outside edge of the hob. It is essential that no gaps are left in this seal in order to prevent spillage near the hob seeping into the cabinet below. 1) remove the pan supports...
Page 20: Possibilities For Insertion
20 possibilities for insertion kitchen unit with door proper arrangements must be taken in designing the forniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. The recommended solution is shown in fig. 10. The panel fitted under the hob shou...
Page 21
21 fig. 12 fo 0198 fig. 11 fo 0947 fig. 13 fig. 14 fo 0938 fo 0939 593.
Page 22: European Guarantee
22 this machine, before leaving the factory, has been tested and studied by many experts and specialists, in order to give you the best results. Any repair work which needs to be carried out should be done with the utmost care and attention. For this reason we recommend that for any problem you cont...
Page 23
23.