Zanussi ZGO63414 User Manual - Product Description

Other manuals for ZGO63414: User Manual, User Manual, Manual

Summary of ZGO63414

  • Page 1

    En user manual hob zgo63414 il.

  • Page 2: Contents

    Contents safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ 7 care and cleaning _ _ _ _ _ _ _ _ _ _...

  • Page 3: Safety

    • unattended cooking on a hob with fat or oil can be dangerous and may result in fire. • never try to extinguish a fire with water, but switch off the appli- ance and then cover flame e.G. With a lid or a fire blanket. • do not store items on the cooking surfaces. • do not use a steam cleaner to cle...

  • Page 4

    Tion device must have a contact opening width of minimum 3 mm. • use only correct isolation devices: line pro- tecting cut-outs, fuses (screw type fuses re- moved from the holder), earth leakage trips and contactors. Gas connection • all gas connections should be made by a qualified person. • before...

  • Page 5: Product Description

    Opening of a window, or more effective venti- lation, for example increasing the level of me- chanical ventilation where present. • use only stable cookware with the correct shape and diameter larger than the dimen- sions of the burners. There is a risk of over- heating and rupture of the glass plat...

  • Page 6: Daily Use

    Control knobs symbol description no gas supply / off posi- tion symbol description ignition position / maxi- mum gas supply minimum gas supply daily use warning! Refer to the safety chapters. Ignition of the burner warning! Be very careful when you use open fire in kitchen environment. Manufacturer ...

  • Page 7: Helpful Hints And Tips

    The spark generator can start automatically when you switch on the mains, after instal- lation or a power cut. It is normal. Turning the burner off to put the flame out, turn the knob to the sym- bol . Warning! Always turn the flame down or switch it off before you remove the pans from the burner. H...

  • Page 8: Troubleshooting

    • make sure you position the pan supports cor- rectly after cleaning. • to make the burners work correctly, make sure that the arms of the pan supports are in the centre of the burner. • be very careful when you replace the pan supports to prevent the hob top from damage. After cleaning, dry the app...

  • Page 9: Installation

    Service technician or dealer may not take place free of charge, even during the warranty period. These data are necessary to help you quickly and correctly. These data are available on the supplied rating plate. • model description ................. • product number (pnc) ................. • serial ...

  • Page 10

    A b b c d a) end of shaft with nut b) washer c) elbow d) rubber pipe holder for liquid gas warning! It is important to install the elbow correctly. Make sure that the shoulder is on the end of the thread. Then install it on the hob connecting pipe. Incorrect assembly may cause a gas leakage. Liquid ...

  • Page 11

    That the ground connection agrees with the standards and regulations. • do not let the power cable to heat up to a temperature higher than 90° c. Make sure that you connect the blue neutral ca- ble to the terminal with a letter "n" on it. Con- nect the brown (or black) phase cable to the terminal wh...

  • Page 12: Technical Data

    Technical data hob dimensions width: 580 mm length: 510 mm hob recess dimensions width: 550 mm length: 470 mm heat input rapid burner: 2.45 kw semi-rapid burner: 1.7 kw auxiliary burner: 1.0 kw total power: g30/g31 (3b/p) 30/30 mbar = 498 g/h electric supply: 230 v ~ 50 hz category: i3b/p gas connec...

  • Page 13

    13 www.Zanussi.Com.

  • Page 14

    14 www.Zanussi.Com.

  • Page 15

    15 www.Zanussi.Com.

  • Page 16

    Www.Zanussi.Com/shop 3973 09801-a-1420 1 3.