Zanussi ZGO96524 User Manual

Other manuals for ZGO96524: User Manual

Summary of ZGO96524

  • Page 1

    En user manual hob zgo96524 eg.

  • Page 2: Contents

    Contents safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 product description _ _ _ _ _ _ _ _ _ _ _ _ _ 7 operating instructions _ _ _ _ _ _ _ _ _ _ _ _ 7 helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ 8 care and cleaning _ _ _ _ _ _ _ _ _ _ _ _...

  • Page 3

    And that it is centrally positioned on the rings in order to avoid safety risks. • do not use unstable cookware or cookware with damaged bottom. There is a risk of tilt- ing and accident. • do not put flammable products or items that are wet with flammable products, fusible ob- jects (made of plasti...

  • Page 4: Installation

    • carefully obey the instructions for electrical connections. There is the risk of injury from electrical current. • disconnect the appliance from the elec- trical supply, before you do the mainte- nance work or you clean it. • the electrical mains terminal is live. • make electrical mains terminal ...

  • Page 5

    – it is no longer than 1500 mm; – it shows no throttles; – it is not subject to traction or torsion; – it does not get in touch with cutting edges or corners; – it can be easily examined in order to check its condition. The control of preservation of the flexible pipe consists in checking that: – it...

  • Page 6

    • the appliance must not be connected with an extension cable, an adapter or a multiple connection (risk of fire). Check that the ground connection is in conformity with the standard and regulations force. • the power cable must be placed in such a way that it does not touch any hot part. • connect ...

  • Page 7: Product Description

    Product description cooking surface layout 3 2 1 4 6 7 5 1 hob top 2 auxiliary burner 3 semi-rapid burner 4 semi-rapid burner 5 triple crown burner 6 semi-rapid burner 7 control knobs control knobs symbol description no gas supply / off posi- tion symbol description ignition position / maxi- mum gas...

  • Page 8: Helpful Hints And Tips

    C d b a a) burner cap b) burner crown c) ignition candle d) thermocouple warning! Do not keep the control knob pushed for more than 15 seconds. If the burner does not light after 15 seconds, release the control knob, turn it into off position and try to light the burner again after minimum 1 minute....

  • Page 9: Care And Cleaning

    Do not place unstable or deformed pots on the rings to prevent from spill and injury. Warning! Flame diffuser are not recommended. Warning! Liquids spilt during cooking can cause the glass to break information on acrylamides important! According to the newest scientific knowledge, if you brown food ...

  • Page 10: What to Do If…

    Ing and check that the burner crown holes are not obstructed. Periodic maintenance periodically speak your local service force centre to check the conditions of the gas sup- ply pipe and the pressure adjuster, if fitted. What to do if… problem possible cause remedy there is no spark when lighting th...

  • Page 11: Technical Data

    If there is a fault, first try to find a solution to the problem yourself. If you cannot find a solution to the problem yourself, speak your dealer or the local service force centre. If you operated the appliance incorrectly, or the installation was not carried out by a registered engineer, the visi...

  • Page 12: By-Pass Diameters

    Category: ii2h3+ gas connection: g 1/2" gas supply: g20 (2h) 20 mbar appliance class: 3 by-pass diameters burner Ø by-pass in 1/100 mm auxiliary 28 semi-rapid 32 triple crown 56 gas burners burner normal power reduced power normal power natural gas g20 (2h) 20 mbar lpg (butane/propane) g30/g31 (3+) ...

  • Page 13

    13 www.Zanussi.Com.

  • Page 14

    14 www.Zanussi.Com.

  • Page 15

    15 www.Zanussi.Com.

  • Page 16

    Www.Zanussi.Com/shop 397 276501-b-172 012.