Summary of ZI 627
Page 1
Dishwasher zi 627 instruction book.
Page 2: Contents
Safety instructions 3 disposal 3 economical and ecological dishwashing 3 installation instructions 4 fitting under a counter 4 levelling 4 water supply connections 4 water outlet hose connection 4 electrical connection 5 description of the appliance 5 the control panel 6 prior to using for the first...
Page 3: Disposal
Installation ● check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged, you should contact your supplier. ● for safety reasons it is dangerous to alter the specifications or attempt to modify this product in any way. ● any electrical and plumbin...
Page 4: Installation Instructions
Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Fitting under a counter ...
Page 5: Description of The Appliance
Electrical connection information concerning the electrical connection is given on the rating plate on the edge of the dishwasher’s door. Before plugging the appliance into the wall socket, make sure that: 1. The mains voltage and current rating at the site of installation match the nominal voltage ...
Page 6: The Control Panel
Function buttons: in addition to the dishwashing programme selected, the following functions can also be set with the help of these buttons: - the setting of the water softener, - the cancelling of a programme in progress. Programme selection buttons: the selection of a washing programme occurs by p...
Page 7
Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with dishwasher ...
Page 8
Filling with dishwasher salt only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. ...
Page 9: In Daily Use
● check if it’s necessary to refill with dishwasher salt or rinse aid ● load cutlery and dishes into the dishwasher. ● fill with dishwasher detergent . ● select a wash programme suitable for the cutlery and dishes. ● start the wash programme. Loading cutlery and dishes sponges, household cloths and ...
Page 10
The upper basket the upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses. Arrange items on and underneath the cup racks so that water can reach all surfaces. Glasses with long stems can be placed upside down in the cu...
Page 11: Different Kinds of Detergent
Detergent tablets detergent tablets from different manufactures dissolve at different rates. For this reason, some detergent tablets do not attain their full cleaning power during short washing programmes. Therefore please use long washing programmes when using detergent tablets, to ensure the compl...
Page 12: Washing Programmes
12 (1) testing programme for en 50242 (see "hints for test centres"). This programme, developed for the use of detergents with enzymes, allows you to achieve, with reduced consumption of energy the same cleaning results that would otherwise be obtained only with the 65°c programmes and conventional ...
Page 13: Starting A Washing Programme
1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Turn on the water tap 3. Close the dishwasher door 4. Press the on/off button the on/off indicator light will come on. 5. Setting and starting the programme press the button corresponding to the require...
Page 14: Maintenance and Cleaning
Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Ensure that the seals around the door, the detergent and rinse aid dispensers are...
Page 15: Something Not Working
...A flashing fault code appears the dishwasher will not start or stops during operation. The intervention of an alarm is indicated by: - the continuous flashing of the indicator light of the running programme, - a combination of flashing and pauses of the end of programme indicator light (as descri...
Page 16
If after all these checks, the problem persists, contact your local service force centre, quoting the model (mod.), product number (pnc) and serial number (s.N.). This information can be found on the rating plate located on the side of the dishwasher door (see picture). So that you always have these...
Page 17: Hints For Test Centres
Testing in accordance with en 60704 must be carried out with appliance fully loaded and using the test programme (see "washing programmes" chart). Test in accordance with en 50242 must be carried out when the salt container and rinse aid dispenser have been filled with salt and rinse aid respectivel...
Page 20
Subject to change without notice 152950 05/0 02/06.