1. DL manuals
  2. Zanussi
  3. Hob
  4. ZKT 650 D
  5. Instruction Book

Zanussi ZKT 650 D Instruction Book

Manual is about: Zanussi Installation and Operating Instructions Ceramic glass induction hob ZKT 650 D

Summary of ZKT 650 D

  • Page 1

    Glass ceramic induction hob glaskeramische inductie-kookplaat table de cuisson vitrocéramique à induction induktions-glaskeramik-kochfeld laca vitrocerámica de cocción por inducción zkt 650 d instruction book gebruiksaanwijzing notice d´utilisation gebrauchsanweisung instrucciones 319 599 300 - b - ...

  • Page 2: Dear Customer,

    2 dear customer, please read this user information carefully. Pay particular attention to the safety instructions on the first pages of this user information. Please keep the user information in a safe place for future refer- ence. Pass them on to any subsequent owners of the appliance. 1 the warnin...

  • Page 3: Contents

    3 contents operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 4: Operating Instructions

    4 operating instructions structions 1 safety the safety of this appliance corresponds with the recognised regulations and the legislation covering the safety of appliances. However, as manufacturers we also regard it as our responsibility to familiarise you with the following safety instructions. El...

  • Page 5: Disposal

    5 general safety instructions a fan for cooling the electronic components is inte- grated in this appliance. This fan switches itself on depending on the registered temperature and has two speeds which are adapted to the output and number of the cooking zones in use. An object with small dimensions ...

  • Page 6: Description of The Hob

    6 description of the hob how your ceramic induction hob works there is an induction coil under the ceramic cooking surface. This generates electromagnetic fields, which act directly on the base of the pots and pans and not, as with other heating up methods, first heat up the ceramic glass. This mean...

  • Page 7

    7 control panel suitable kitchenware for induction cooking zones pots and pans • in principle all pots and pans with magnetic bases are suitable. These are steel, steel-enamel as well as cast-iron pots and pans. • stainless steel pots with metal mixture bases (sandwiches basis e.G. Tefal with alumin...

  • Page 8: G Surface

    8 operation of the cooking surface g surface 3 when the cooking zones are switched on, they may hum briefly. This is a characteristic of all induction hobs and does not impair either the function or service life of the appli- ance. Operating the hob the hob is controlled via sensor keys. They react ...

  • Page 9

    9 safety switch-off of the cooking zones if you forget to switch off a cooking zone, it is auto- matically switched off after a certain period. If the safety switch-off function was activated, " 0 ." is shown in the display if the temperature of the cook- ing zone does not exceed 60°c. "h" is shown ...

  • Page 10

    10 automatic timer the integrated timer can be used to set the cooking duration on all four cooking zones. Using the auto- matic timer means that you do not have to con- stantly remain near the cooking zone during cooking: the cooking zone is switched off automatically at the end of the required tim...

  • Page 11

    11 power function the power function enables you to increase the out- put of the two front cooking zones for 10 minutes. With this function, you can, for example, bring a large quantity of water rapidly to the boil or brown meat very well. Activating the power function: after you have selected one o...

  • Page 12: Cleaning and Care

    12 cleaning and care advantages for cleaning and caring for the induction cooking zone 2 the cleaning effort for induction glass ceramic cooking surfaces is considerably less than for cooking surfaces with radiant heating: – the induction cooking zone reacts faster to switching down and off. Boiling...

  • Page 13

    13 remove burned-in sugar and melted plastic immedi- ately – while it is still warm (not hot) – with a glass scraper. Otherwise, damage can occur. Next, clean the cooking field normally. Damage caused by sugar or food containing sugar can be prevented by caring for the cooking surface with collo-pro...

  • Page 14: What to Do If ...

    14 what to do if ... If the hob does not function correctly, please carry out the following checks as it may be something you can remedy yourself. When the cooking field is damaged (glass fractures, cracks, breakages) or the set operational fault is not listed in the list above, immediately disconne...

  • Page 15: Installation Instructions

    15 installation instructions nstallation instructions 1 important! The new appliance may only be installed and connected by an qualified personnel. Please observe this instruction, otherwise the warranty will not cover any damage that may occur. Safety instructions for the installer • a fixture must...

  • Page 16: Electrical Connection

    16 electrical connection the electrical connection of the hob must be carried out by qualified persons. Protection against acciden- tal contact must be guaranteed through the appli- ance being installed in accordance with the regulations. The appliance must be disconnected from the mains during inst...

  • Page 17: Guarantee Conditions

    18 guarantee conditions standard guarantee conditions we, zanussi, undertake that if, within 24 months of the date of the purchase, this zanussi appliance or any part thereof is proved to be defective by any reason only of faulty workmanship or materials, we will, at our option, repair or replace th...

  • Page 18: Service & Spare Parts

    19 service & spare parts vice & spare parts in the event of your appliance requiring service, or if you wish to purchase spare parts, contact your local zanussi service force centre by telephoning: 08705 929 929 your call will be automatically routed to the service force centre covering your post co...

  • Page 19: Montasje

    102 installation/montage/montaje/montering/asennus montasje.