1. DL manuals
  2. Zanussi
  3. Hob
  4. ZKT 651 D
  5. Installation And Operating Instructions Manual

Zanussi ZKT 651 D Installation And Operating Instructions Manual - Description of The Appliance

Manual is about: Ceramic Glass Induction Hob

Summary of ZKT 651 D

  • Page 1

    Ceramic glass induction hob zkt 651 d installation and operating instructions g.

  • Page 2: Dear Customer,

    2 dear customer, please read these user instructions carefully and keep them to refer to later. Please pass the user instructions on to any future owner of the appliance. The following symbols are used in the text: 1 safety instructions warning! Notes that concern your personal safety. Important! No...

  • Page 3: Contents

    3 contents operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 4: Operating Instructions

    4 operating instructions 1 safety instructions 3 please comply with these instructions. If you do not, any damage resulting is not covered by the warranty. 5 this appliance conforms with the following eu directives: – 73/23/eec dated 19.02.1973 low voltage direc- tive – 89/336/eec dated 03.05.1989 e...

  • Page 5: Description of The Appliance

    5 description of the appliance cooking surface layout control panel layout induction cooking zone 2200w with power function 3000w induction cooking zone 1400w induction cooking zone 1800 w control panel induction cooking zone 1800 w with power function 2300 w on/off with power indicator heat setting...

  • Page 6: Touch Control Sensor Fields

    6 touch control sensor fields the appliance is operated using touch control sen- sor fields. Functions are controlled by touching sen- sor fields and confirmed by displays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields. Displays residual heat indicator...

  • Page 7: Operating The Appliance

    7 operating the appliance 3 use the induction cooking zones with suitable cookware. Switching the appliance on and off 3 after switching on, within approx. 10 seconds a heat setting or a function must be set, other- wise the appliance automatically switches it- self off. Selecting the heat setting 3...

  • Page 8

    8 using the automatic warm-up function all cooking zones are equipped with an automatic warm-up function. The automatic warm-up function sets the cooking zone to the highest setting for a certain period of time and then automatically switch- es back to the cooking setting that was originally set. 3 ...

  • Page 9

    9 locking/unlocking the control panel the control panel, with the exception of the “on/off” sensor field, can be locked at any time in order to prevent the settings being changed e.G. By wiping over the panel with a cloth. 3 when you switch the appliance off, the locking function is automatically sw...

  • Page 10

    10 switching the power function on and off the power function makes more power available to the induction cooking zones, e.G. To bring a large quantity of water to the boil quickly. The power function is activated for 10 minutes. After that the induction cooking zone automatically switches back to h...

  • Page 11: Using The Timer

    11 using the timer all cooking zones can use each use one of the two timer functions at the same time. 3 if a cooking zone is switched off, the timer function set is also switched off. 3 if a heat setting is set on this cooking zone in addition to a countdown timer, the cooking zone is switched off ...

  • Page 12: Setting The Time

    12 setting the time switching off the timer function changing the time displaying the time remaining for a cooking zone switching off the acoustic signal step control panel field display 1. Select cooking zone pilot light of the cooking zone selected flashes 2. Touch or for the cooking zone selected...

  • Page 13: Safety Cut-Out

    13 safety cut-out cooking surface • if after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off. • if one or more sensor fields are covered for longer than approx. 10 seconds, e.G. By a pan p...

  • Page 14: Tips On Cooking and Frying

    14 tips on cooking and frying 3 information about acrylamides according to the latest scientific research, in- tensive browning of food, especially in prod- ucts containing starch, may present a health risk due to acrylamide. Therefore we recom- mend cooking at low temperatures and not browning food...

  • Page 15: Tips On Energy Saving

    15 tips on energy saving 2 place cookware on the cooking zone before it is switched on. 2 if possible, always place a lid on the cook- ware. Examples of cooking applications the information given in the following table is for guidance only. The power function is suitable for heating large quantities...

  • Page 16: Cleaning and Care

    16 cleaning and care 1 take care! Risk of burns from residual heat. 1 important sharp objects and abrasive clean- ing materials will damage the appliance. Clean with water and washing up liquid. 1 important residues from cleaning agents will damage the appliance. Remove residues with water and washi...

  • Page 17: What to Do If

    17 what to do if … problem possible cause remedy the cooking zones will not switch on or are not functioning more than 10 seconds have passed since the appliance was switched on switch the appliance on again. The lock is switched on l switch off the lock (see the section “locking/unlocking the contr...

  • Page 18: Disposal

    18 if you are unable to remedy the problem by fol- lowing the above suggestions, please contact your local service force centre. 1 warning! Repairs to the appliance are only to be carried out by qualified service engineers. Considerable danger to the user may result from improper repairs. 3 if the a...

  • Page 19: Installation Instructions

    19 installation instructions safety instructions the laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.) installation may only be carried out by a qualified electrician. The minim...

  • Page 20: Sticking On The Seal

    20 sticking on the seal • clean the worktop in the area of the cut-out sec- tion. • stick the one-sided self-adhesive sealing tape supplied all the way round the lower edge of the cooking surface along the outer edge of the glass ceramic panel. Do not stretch it. The cut ends should lie in the middl...

  • Page 21: Assembly

    21 assembly.

  • Page 22

    22.

  • Page 23

    23.

  • Page 24: Rating Plate

    24 rating plate induction 7, 2 kw 55gad 80ag zkt 651 d 7, 2 kw 949 591 494 230 v 50 hz zanussi.

  • Page 25: Warranty Conditions

    25 warranty conditions standard guarantee conditions we, zanussi, undertake that if within 24 months of the date of the purchase this zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same f...

  • Page 26

    26.

  • Page 27: Service and Spare Parts

    27 service and spare parts if the event of your appliance requiring service, or if you wish to purchase spare parts, please contact service force by telephoning: your telephone call will be automatically routed to the service force centre covering your post code ar- ea. For the address of your local...

  • Page 28

    The electrolux group. The world´s no.1 choice. The electrolux group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million electrolux group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowe...