Zanussi ZNF21X User Manual - page 10
10
ZNF21X
Before first use
Setting the clock
After your microwave oven is first
plugged-in or after a power failure, the
clock display will flash to indicate that
the time shown is not correct. Before
using the microwave oven, adjust the
clock through the procedure described
below but starting on Step 2.
To set the clock, proceed as follows:
1. Press the “+” key until the Clock
Indicator Light starts to flash. Press
the start key.
2. Press “+” and “–” keys to set the
correct hour value.
3. Press the start key to validate the
hour value. The minute numbers will
start to flash.
4. Press “–” and “+” keys to set the
correct minute value.
5. To finish, press the start key again.
Child lock
The oven functioning can be blocked
(for example to stop it being used by
children).
1. To Block the oven, press the child
lock key for 3 seconds. When a key
is pressed the display shows a Key
symbol and the oven performs no
function.
2. To unblock the oven press again the
child lock key for 3 seconds.
Interrupting a cooking cycle
You can stop the cooking process at
any time by pressing the Stop key once
or by opening the oven door.
In both cases:
• Microwave emission is stopped
immediately.
• The grill is de-activated but is still very
hot. Danger of burning!
• The timer stops automatically,
indicating the operating time that is
left.
If you wish, at this time you can:
1. Turn or stir the food to ensure it will
be evenly cooked.
2. Change the process parameters.
To restart the process, close the door
and press the Start key
Altering parameters
The function and temperature can be
altered when the oven is operating or
when the cooking process has been
interrupted by simply turning the
respective knob to the new setting.
To change power level and operating
time, please proceed as follows:
- Press the “+” and “-“ keys to change
directly the operating time.
- Turn the function selector to change
the function.
- Turn the power selector to change
the function.
Cancelling a cooking cycle
If you wish to cancel the cooking
process, rotate the Function Selector
until zero or press the Stop key twice.
End of a cooking cycle