Summary of ZSF2430
Page 1
En user manual dishwasher zsf2430
Page 2: Contents
Contents safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 hints and tips _ _ _ _ _ _ _ _ _ _ _ _ ...
Page 3: Control Panel
– by clients in hotels, motels and other resi- dential type environments – bed and breakfast type environments. Warning! Risk of injury. • do not change the specification of this appli- ance. • put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal pos...
Page 4: Programmes
Indicators description washing phase indicator. Drying phase indicator. End indicator. Salt indicator. This indicator is off while the programme operates. Programmes programme 1) degree of soil type of load programme phases duration (min) energy (kwh) water (l) heavy soil crockery, cutlery, pots and...
Page 5
4. Open the water tap. 5. Processing residues can stay in the appli- ance. Start a programme to remove them. Do not use detergent and do not load the baskets. Adjusting the water softener water hardness electronic adjust- ment german degrees (°dh) french degrees (°fh) mmol/l clarke degrees > 24 > 40...
Page 6: Daily Use
3 put 1 litre of water in the salt container (on- ly for the first time). 4 5 6 caution! Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after you fill the salt container, start a programme. Filing the rinse aid dispenser 1 2 max 3 4 b 5 fill w...
Page 7
Using the detergent 1 2 a 3 fill the detergent dis- penser (a) with deter- gent. B 4 if you use a washing programme with pre- wash phase, put more detergent in the pre- wash detergent com- partment (b). A 5 6 combi detergent tablets these tablets contain detergent, rinse aid and other added agents. ...
Page 8: Hints And Tips
• the phase indicators of the set pro- gramme start to flash. 4. Press the start button. The programme starts. • the start indicator comes on. • only the indicator of the phase in opera- tion stays on. Starting a programme with delay start 1. Set the programme. 2. Press the delay button to delay the...
Page 9: Care and Cleaning
• put hollow items (cups, glasses and pans) with the opening down. • make sure that cutlery and dishes do not bond together. Mix spoons with other cutlery. • make sure that glasses do not touch other glasses. • put small items in the cutlery basket. • put light items in the primary basket. Make sure...
Page 10: Troubleshooting
1 b a 2 remove the filters a and b from the bottom of the appliance. 1 2 3 4 fully clean the filters below running water. 1 2 5 put the filters back. Turn the filter a clockwise to lock it. Cleaning the spray arm do these steps to remove and to put the spray arm back: 1 2 3 if the holes in the spray...
Page 11
Alarm code problem • the indicator of the set programme flashes contin- uously. • the end indicator flashes 1 time intermittently. The appliance does not fill with water. • the indicator of the set programme flashes contin- uously. • the end indicator flashes 2 times intermittently. The appliance do...
Page 12: Technical Information
Stains and dry water drops on glasses and dishes • the released quantity of rinse aid is not suffi- cient. Adjust the rinse aid selector to a higher position. • the quality of the detergent can be the cause. Dishes are wet • the programme is without a drying phase or with a low temperature drying ph...
Page 13
13 www.Zanussi.Com.
Page 14
14 www.Zanussi.Com.
Page 15
15 www.Zanussi.Com.
Page 16
Www.Zanussi.Com/shop 1569 66210-a-0820 1 3.