Zanussi ZTH 488 User Manual - Technical Data
Technical data
height x width x depth
85 x 60 x 58 cm
drum volume
108 l
depth with the load door opened
109 cm
adjustable height
1.5 cm
the appliance weight
55 kg
maximum load volume
8 kg
voltage
230 -240 V
necessary fuse
13
total power
900 W
energy efficiency class
A
energy consumption kWh/cycle
1)
2,15 kWh
annual energy consumption
121,3 kWh
type of use
Domestic
permitted ambient temperature
+ 5°C to + 35°C
1) 8 kg of cotton, centrifuged at 1000 rpm with reference to EN 61121
Machine settings
Setting
Implementation
BUZZER permanent off
1.
Turn the programme selector to any programme.
2.
Press simultaneously the
INTENSIVE and
LONG ANTI-
CREASE buttons and hold down for approx. 5 seconds.
3.
The buzzer is by default always off.
Water hardness
Water contains, a variable
quantity of limestone and miner-
al salts of which quantities vary
according to geographical loca-
tions thus varying its conductivi-
ty values.
Relevant variations of the con-
ductivity of the water compared
to those prefixed by the factory
could slightly influence the re-
sidual humidity of the laundry at
the end of the cycle. Your dryer
allows you to regulate the sen-
sitivity of the drying sensor
based on conductivity values of
the water.
1.
Turn the programme selector to any programme.
2.
Press simultaneously the
LONG ANTICREASE and START/
PAUSE buttons and hold down for approx. 5 seconds. The current
setting is on the display:
–
low conductivity <300 micro S/cm
–
medium conductivity 300-600 micro S/cm
–
high conductivity >600 micro S/cm
3.
Press the START/PAUSE button sequentially until you set desired
level.
4.
To memorize setting press simultaneously the the
LONG ANTI-
CREASE and START/PAUSE buttons or turn knob to O off position
14
www.zanussi.com