Summary of ZWF 71340W
Page 1
Getting started? Easy. User manual zwf 71340w en user manual washing machine.
Page 2: Safety Information
Safety information before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. Children and vuln...
Page 3: Safety Instructions
• if the supply cord is damaged, it must be replaced by the manufacturer, its authorised service centre or similarly qualified persons in order to avoid a hazard. • before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • do not use water spray and steam to...
Page 4: Product Description
Service • to repair the appliance contact an authorised service centre. • use original spare parts only. Disposal warning! Risk of injury or suffocation. • disconnect the appliance from the mains supply. • cut off the mains cable and discard it. • remove the door catch to prevent children and pets t...
Page 5: Easy Start
Easy start control panel description 90° 60° 40° 30° start/pause 3h 6h 9h delay start cotton cotton eco synthetics delicates wool/ handwash jeans mix 20° drain easy iron refresh 20min rinse spin dark garments temp spin quick 2 3 5 4 6 7 1 1 programme knob 2 delay start button (delay start) 3 indicat...
Page 6
Programme temperature range maximum load maximum spin speed programme description (type of load and soil level) cotton eco 1) 60°c - 40°c 7 kg 1300 rpm white cotton and colour-fast cotton. Normal soil. The energy consumption decreases and the time of the wash- ing programme is extended. Synthetics 6...
Page 7
Programme temperature range maximum load maximum spin speed programme description (type of load and soil level) 30' @ 30° 30°c 3 kg 700 rpm a short cycle for synthetics and delicate items with light soil level or for items to freshen up. 1) standard programmes for the energy label consumption values...
Page 8: Consumption Values
Programme quick 1) delay start 30' @ 30° ■ ■ 1) when you set the quick option, we recommend that you decrease the quantity of the laundry. It is pos- sible to keep the full load but the washing results can be unsatisfactory. Recommended load: cotton: 3,5 kg, synthetics and delicates: 1,5 kg. Consump...
Page 9: Options
Options temp with this option you can change the default temperature. Indicator = cold water. The indicator of the set temperature comes on. Spin with this button you can set one of these options: the indicator of the set option comes on. • automatic spin reduction set this option to decrease the ma...
Page 10
3. Shake the items before you put them in the appliance. Make sure not to put too much laundry in the drum. Refer to max. Loads indicated in "programme chart". 4. Close the door. Caution! Make sure that no laun- dry stays be- tween the seal and the door. There is a risk of water leak- age or dam- ag...
Page 11
If you set something incorrect, the indicator of button start/pause flashes red. Starting a programme without the delay start press the button start/pause. The corresponding indicator stops to flash. The phase indicator illuminates and stays on. The programme starts and the door locks. The drain pum...
Page 12: Hints and Tips
• you must drain the water to open the door. Draining the water: 1. Set a draining (drain) or a spinning (spin) programme. 2. Press the button start/pause. The appliance drains the water and spins. 3. When the programme is completed: • the indicator of the button start/pause goes off and after a cou...
Page 13: Care and Cleaning
Water hardness is soft it is not necessary to use a water softener. To know the water hardness in your area, contact your local water authority. Use the correct quantity of the water softener. Obey the instructions that you find on the packaging of the product. Care and cleaning warning! Refer to sa...
Page 14: Troubleshooting
Frost precautions if the appliance is installed in an area where the temperature can be less than 0 °c, remove the remaining water from the inlet hose and the drain pump. Do this procedure also when you want to do the emergency drain. 1. Disconnect the mains plug from the mains socket. 2. Remove the...
Page 15
Problem possible solution the appliance does not fill with water properly. • make sure that the water tap is open. • make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. • make sure that the water tap is not clogged. • make sure th...
Page 16: Technical Data
Find the information on the rating plate: model (mod.), pnc (prod.No.), serial number (ser.No.). Technical data dimension width/ height/ depth/ to- tal depth 600 mm/ 850 mm/ 559 mm/ 578 mm electrical connection voltage overall power fuse frequency 230-240 v 2200 w 13 a 50 hz level of protection agai...
Page 17
17.
Page 18
18.
Page 19
19.
Page 20: Www.Zanussi.Com/shop
Www.Zanussi.Com/shop 192965110-a-072015.