Zanussi ZYB 590 XL User Manual - Mod. Zyb 590 Xl

 31

Clean the oven door glass with warm water and  a

soft cloth only. Never use harsh abrasives as they

could damage the special heat-resistant surface of

the inner glasses.

Once the cleaning is carried out, refit the oven door,

following the procedure in reverse.

The three glasses in the middle are special glasses

that have been treated to resist heat. One is marked

with a small dot located on a corner, the other with

a black frame and the third one has no marking.

It is important that, when refitting the oven door, the

inner glasses are fixed in the right position.

To check if this operation has been carried out

correctly, when inserting the glass, make sure that:

the glass marked with the black frame must be

arranged with the decorated surface which looks

towards the inner side of the door. The slight

roughness of the printing must not be discernible

when you stroke your fingers over the visible

surface;

the dot is located on the upper right corner of the

glass  (see fig. 6 and fig. 7).

5

55

55

6

66

66

7

77

77

Mod. ZYB 590 XL

Mod. ZYB 591 XL