Zap Zappy 3 Pro Owner's Manual - page 5
RIDING THE TRI SCOOTER
Once you have completed the initial charge you are ready to ride.
Remember, this is not a toy. The tri scooter can reach speeds up
to 15.5 mph depending on the terrain and the weight of the rider.
You must wear a helmet and protective pads. You must also be
aware of all local laws and ordinances that govern and/or restrict
the use of powered scooters. The laws and ordinances vary
greatly from municipality to municipality. It is your responsibility
to know and abide by your local restrictions.
To ride, plug the key into the key ignition and
turn the key to the “ON” position. The battery
gauge will illuminate indicating that the battery
is in operation.
Hold onto the handlebars with both hands. Your left fingers will
control the brakes and your right thumb will control the thumb
throttle. As you depress the throttle lever with your thumb the
speed will increase. Release the thumb throttle and apply the
brake to stop the scooter. You will control the speed of the
scooter by using both the throttle and the brake. When the
brake handle is squeezed it cuts power to the throttle.
NOTE 1: You may use the balancing wheel (the smaller middle
rear wheel) to balance the tri scooter when you want to ride with
the front wheel raised. WARNING: Never try stunts beyond the
control of your skills. Never ride too fast for your skills or
condition.
Power switch button
off on
8
NOTE 2: When scooter is parked, press the power switch button
to the “off” position; this will avoid anyone from accidentally
pushing the throttle causing the scooter to speed forward. Failure
to do this could lead to an accident.
FOLDING THE TRI SCOOTER
1. Unplug the power connecting plugs.
2. Unscrew the bolts and nuts from the connecting tube
clamp using the enclosed allen wrenches .
3. Lift the connecting tube (which is also attached to the
handlebar tube).
4. Carefully place the handlebar tube on the footrest frame.
5. Finger screw the bolts and nuts back to the connecting
tube clamp to avoid any misplacements.
9