Model seq preamp - equalizer a.R.P.A. Of america corp. Made in modesto, ca u.S.A..
Contents introduction 3 features 3 installation instructions 4 connecting the seq 5 operation and calibration 6 input gain control 6 mounting method 7 seq wiring diagram-method 1 9 seq wiring diagram-method 2 10 help - technical assistance 11 manufacturing 12 2.
Introduction congratulations! You have just chosen the premium in car audio equipment. Zapco has well established its place as the technological leader in the car audio industry. Because of this, you can rest assured that you have the best car audio components in the world. The zapco seq stereo prea...
Installation instructions the cable supplied with your seq is comprised of seven wires. These seven wires are terminated on one end in a connector designed to be inserted into the back of the seq. The other wire ends have been left unterminated. The following are instructions on proper connection of...
Additional ground connections: to ensure proper system grounding the following additional connections must be made. Rca shields & seq case must be connected to case of source unit. Rca shields - signal ground from amplifier inputs (connect wire from rca shields @ amplifier input to case of source un...
Operation and calibration a. Input gain controls provide adjustable gain of 6db to 26db. B. Input clipping detector flashes whenever input signal is within +/- 1db of clipping (super-bright led). C. Volume control: high-quality conductive plastic potentiometer. D. Output clipping detector: indicates...
Input gain control calibration/adjustment: the pre-amp circuit built into the seq is capable of 26db of gain. Separate left and right channel input gain and adjustments are made via two access holes in the front cover. Adjustment to the input gain may be necessary to match the source (tape deck, tun...
Mounting method bracket method attach bracket to mounting surface placing no. 10 sheet metal or machine screws through the bracket slots. Attach the bracket to the equalizer using the enclosed 1/4” socket-head screws and nylon shoulder washers. Once the equalizer is swiveled to the desired angle (th...
9.
10
Technical assistance should you experience a problem with your seq, please contact the dealer that sold you this product. If your dealer is unable to solve your problem, you may contact the factory service department directly. Phone: (209) 577-4268 monday-friday 8am-5pm pacific time fax: (209) 577-8...
Manufacturing this product is designed and manufactured in the usa. The following operations are entirely performed in our modesto, california plant. 1. Pc board insertion the components are inserted into american made printed circuit boards. 2. Pc soldering the printed circuit board assembly is wav...
A.R.P.A. Of america corp. 413 s. Riverside drive, suite d modesto, ca 95354 (209) 577-4268 fax (209) 577-8548 seq rev. E 7/96.
