Model z250c4-sl competition four channel amplifier a.R.P.A. Of america corp. Made in modesto, ca u.S.A..
2 table of contents the symbilink z250c4-sl 3 z250c4-sl key features 4 front panel layout - input section 5 front panel layout - output section 6 specifications 7 power per channel vs. Distortion, four channels driven 7 installation 8 the z250c4-sl also works with the symbilink line driver 9 the z25...
3 the symbilink z250c4-sl thank you for purchasing the z250c4-sl. The z250c4-sl is a four channel amplifier that is conservatively rated at 30 watts x 4 into four ohms, 60 watts x 4 into two ohms and 100 watts x 4 into one ohm loads. The z250c4-sl features symbilink balanced inputs. These profession...
4 z250c4-sl key features • balanced symbilink technology • quality zapco construction • dual pro audio balanced differential inputs • computer-linearized bias for class a performance • low radiated noise for clean am/fm reception • separate led’s for power and protection • low global feedback • low ...
5 front panel layout.
6.
7 specifications power per channel - 4 channel mode t.H.D. +n 30 watts x 4 @ 4 Ω 60 watts x 4 @ 2 Ω 100 watts x 4 @ 1 Ω power - dual bridged mono 120 watts x 2 @ 4 Ω 200 watts x 2 @2 Ω frequency response 20hz - 20khz +0, - .35db s/n ratio @ 1khz > 100db transient distortion slew rate > 40v/ µ s sepa...
8 installation careful thought and planning is essential when installing any piece of equipment in your vehicle. To ensure proper operation and maximum performance of your amplifier, zapco recommends that the installation is performed by a zapco authorized dealer. If this service is unavailable to y...
9 the z250c4-sl also works with the symbilink line driver.
10 the z250c4-sl supplies power to signal processors such as the sp7-sl.
11 why use the balanced symbilink system? Rca style unbalanced cables have the following disadvantages: 1) magnetic & electrostatic pickup. Noise and audio distortion can be induced into the cable because the cable shield is also the audio (-) connection. 2) unbalanced cables are typically driven in...
12 symbilink cable and connector pinout.
13 technical assistance should you experience a problem with your z250c4-sl, please contact the dealer that sold you this product. If your dealer is unable to solve your problem, you may contact the factory service department directly. Phone: (209) 577-4268 mon-fri 8am-5pm pacific time fax: (209) 57...
14 a.R.P.A. Of america corp. 413 s. Riverside drive, suite d modesto, ca 95354 (209) 577-4268 fax (209) 577-8548 z250c4-sl rev. C 11/95.
