Summary of Z020
Page 1
Z020 – evdo modem user manual v6.1 2007.07.30
Page 2
Z020 – evdo modem (user manual) zapp – the next generation network 2/48 anydata cdma module series reference design specification copyright © 2000~2007 anydata corp. All rights reserved. Any part of this document may not be distributed, communicated, reproduced or transmitted in any form or by any m...
Page 3
Z020 – evdo modem (user manual) zapp – the next generation network 3/48 contents 1. Getting started .....................................................................................................................................4 1.1 usb modem ......................................................
Page 4: 1. Getting Started
Z020 – evdo modem (user manual) zapp – the next generation network 4/48 1. Getting started in order to use z020 usb modem following must be satisfied: 1) zapp online software and z020 usb modem driver has been installed on the computer. 2) the z020 evdo modem is active (the activation process has be...
Page 5
Z020 – evdo modem (user manual) zapp – the next generation network 5/48 1.1 usb modem +5v dc power jack mini usb port ear jack led power key internal antenna.
Page 6
Z020 – evdo modem (user manual) zapp – the next generation network 6/48 when dismounting the battery, push the bottom of modem upward to slide easily out from the battery cradle. External antenna port battery contact pins battery (optional) contact switch.
Page 7
Z020 – evdo modem (user manual) zapp – the next generation network 7/48 1.2 components 5v dc power adaptor standard usb cable 1.3 led indicator power mode descriptions blue battery power is used blue blink low battery warning red external dc power is used and fully charged violet external dc power i...
Page 8
Z020 – evdo modem (user manual) zapp – the next generation network 8/48 2. Program installation 2.1 introduction this section describes step-by-step method to install z020 usb modem and zapp online express software. Note> must install the software before connecting z020 usb modem to pc/notebook. 2.2...
Page 9
Z020 – evdo modem (user manual) zapp – the next generation network 9/48 2.3 usb driver installation and uninstall (windows xp/2000) 2.3.1 usb driver installation (automatic) 1. The installation of the usb wireless modem connect should run automatically upon selecting this option on the menu of the i...
Page 10
Z020 – evdo modem (user manual) zapp – the next generation network 10/48 2. The computer needs to restart after the driver installation completed. To restart the computer later, select “i want to manually reboot later”..
Page 11
Z020 – evdo modem (user manual) zapp – the next generation network 11/48 3. Connect the modem and pc’s usb port, and check if the driver is installed properly in “device manager”. See the followings to the location of “device manager” [start ▶ control panel system ▶ ▶ hardware tab ▶ devise manager] ...
Page 12
Z020 – evdo modem (user manual) zapp – the next generation network 12/48 2.3.2 usb driver installation (manual) 1. Connect the modem and pc’s usb port with supplied usb cable. The manual driver installation shall be required twice ※ . 2. Installing “anydata usb modem driver” window will appear. Sele...
Page 13
Z020 – evdo modem (user manual) zapp – the next generation network 13/48 7. A window that searches “anydata cdma usb modem” will appear. 8. Process of installing “anydata cdma usb modem”..
Page 14
Z020 – evdo modem (user manual) zapp – the next generation network 14/48 9. If the installation of “anydata cdma usb modem” has been completed, following window will appear. 10. Next, it will install “anydata cdma usb serial device”. 11. Select “install from a list or specific location (advanced)”..
Page 15
Z020 – evdo modem (user manual) zapp – the next generation network 15/48 12. Press button to proceed. 13. Select the proper path from the cd window will appear. 14. Select from the cd’s path “cd rom driver: \driver\” folder for appropriate os. 15. Press button to move to next step..
Page 16
Z020 – evdo modem (user manual) zapp – the next generation network 16/48 16. Window that searches “anydata cdma usb serial device” will appear. 17. If the installation has done properly, this window will appear. This will complete the driver installation..
Page 17
Z020 – evdo modem (user manual) zapp – the next generation network 17/48 18. Connect the modem and pc’s usb port, and check if the driver is installed properly in “device manager”. See the followings to the location of “device manager” [start ▶ control panel system ▶ ▶ hardware tab ▶ devise manager]...
Page 18
Z020 – evdo modem (user manual) zapp – the next generation network 18/48 2.3.3 usb driver uninstall 1. Disconnect the modem from usb port before uninstalling the driver. 2. By clicking on under the driver folder in cd, this will start as shown below. 3. Select “install” to uninstall the driver. To s...
Page 19
Z020 – evdo modem (user manual) zapp – the next generation network 19/48 4. As shown below, click “finish” then the driver will be uninstalled. 5. The computer must restart after the driver is uninstalled..
Page 20
Z020 – evdo modem (user manual) zapp – the next generation network 20/48 2.4 usb driver installation and uninstall (windows vista) ※ the same will apply to windows vista 64bit. 2.4.1 usb driver installation (automatic) 1. The installation of the usb wireless modem connect should run automatically up...
Page 21
Z020 – evdo modem (user manual) zapp – the next generation network 21/48 2. The computer needs to restart after the driver installation completed. To restart the computer later, select “i want to manually reboot later”..
Page 22
Z020 – evdo modem (user manual) zapp – the next generation network 22/48 3. Connect the modem and pc’s usb port, and check if the driver is installed properly in “device manager”. See the followings to the location of “device manager” [start ▶ control panel system and maintenance ▶ ▶ devise manager]...
Page 23
Z020 – evdo modem (user manual) zapp – the next generation network 23/48 2.4.2 usb driver installation (manual) 1. Connect the usb modem to the computer. ※ the manual driver installation shall be required twice. 2. Click “locate and install driver software (recommended)” when shown in below. ㅁ a 3. ...
Page 24
Z020 – evdo modem (user manual) zapp – the next generation network 24/48 5 click “brower my computer for driver software (advanced)”. 6. Click “browse” and click “next” as shown below..
Page 25
Z020 – evdo modem (user manual) zapp – the next generation network 25/48 7. “installing driver software” will be shown as below. 8. Click “close” if driver will be installed successfully as shown below. ※ after the windows shown above, the driver installation is required one more time ..
Page 26
Z020 – evdo modem (user manual) zapp – the next generation network 26/48 9. Click “locate and install driver software (recommended)” when shown below. 10. Click “continue” when “user account control” is shown. 11. Click “i don’t have the disc. Show me other options.”.
Page 27
Z020 – evdo modem (user manual) zapp – the next generation network 27/48 12 click “brower my computer for driver software (advanced)”. 13. Click “browse” and click “next” as shown below..
Page 28
Z020 – evdo modem (user manual) zapp – the next generation network 28/48 14. “installing driver software” will be shown as below. 15. Click “close” when the driver will be installed successfully as shown below..
Page 29
Z020 – evdo modem (user manual) zapp – the next generation network 29/48 16. Connect the modem and pc’s usb port, and check if the driver is installed properly in “device manager”. See the followings to the location of “device manager” [start ▶ control panel system and maintenance ▶ ▶ devise manager...
Page 30
Z020 – evdo modem (user manual) zapp – the next generation network 30/48 2.4.3 usb driver uninstall 1. Disconnect the modem from usb port before uninstalling the driver. 2. By clicking on under the driver folder in cd, this will start as shown below. 3. Select “install” to uninstall the driver. To s...
Page 31
Z020 – evdo modem (user manual) zapp – the next generation network 31/48 4. As shown below, click “finish” then the driver will be uninstalled. 5. The computer must restart after the driver is uninstalled..
Page 32
Z020 – evdo modem (user manual) zapp – the next generation network 32/48 2.5 installing zapp online express software 1. The installation of the usb wireless modem connect should run automatically upon selecting this option on the menu of the installation cd. Click ” install / instalare” on the menu....
Page 33
Z020 – evdo modem (user manual) zapp – the next generation network 33/48 5. Press button to proceed. 6. Next window is related to license agreement. Please read carefully..
Page 34
Z020 – evdo modem (user manual) zapp – the next generation network 34/48 7. Press “i agree” button to advance to the next step..
Page 35
Z020 – evdo modem (user manual) zapp – the next generation network 35/48 8. Next window displays asking proper path for installing the program. Default path is “c:\program files\ zapp online express”. 9. Press button to install the program..
Page 36
Z020 – evdo modem (user manual) zapp – the next generation network 36/48 10. When program has been successfully installed, following window will display. 11. Press button for ending the program installation. This is installed the zapp online express program. If modem is not connected to pc/notebook ...
Page 37
Z020 – evdo modem (user manual) zapp – the next generation network 37/48 3. Using zapp online express program 3.1 running the program there are 2 (two) ways to run the installed zapp online express program. 1) double-click shortcut icon on the desktop. 2) navigate and run zapp online express program...
Page 38
Z020 – evdo modem (user manual) zapp – the next generation network 38/48 3.2 exiting the program from the zapp online express program, by pressing button will quit the program. If dun is running, the program will end after the completion of these commands..
Page 39
Z020 – evdo modem (user manual) zapp – the next generation network 39/48 3.3 screen display of zapp online express 3.3.1 executed screen end & minimize internet information voice,sms, config action window.
Page 40
Z020 – evdo modem (user manual) zapp – the next generation network 40/48 3.3.2 description of each icon display function rssi signal strength indicator no signal rx diversity available. Evdo mode available battery indicator battery fully charged low battery or battery nil usb connected charging usb ...
Page 41
Z020 – evdo modem (user manual) zapp – the next generation network 41/48 [basic] tab the basic configuration for connect to the network using ev-do modem. All values are set automatically, however if wants to change the value then check appropriate box/boxes in the left and press button to take effe...
Page 42
Z020 – evdo modem (user manual) zapp – the next generation network 42/48 [ about ] tab displays the software version for zapp online express..
Page 43
Z020 – evdo modem (user manual) zapp – the next generation network 43/48 3.4 connecting to the internet connection information, such as username, password, and servicenum, are already inserted into the zapp online express program. In case they are not inserted, you can manually type them: username a...
Page 44
Z020 – evdo modem (user manual) zapp – the next generation network 44/48 3.5 disconnecting from the internet when user is ready to disconnect from the internet, press button to end the connection. Please check the following if abrupt disconnection of modem occurred: 1) did i intentionally disconnect...
Page 45
Z020 – evdo modem (user manual) zapp – the next generation network 45/48 3.7 viewing received or saved message (sms can only be received when the modem is in 1x or hybrid mode !) 1) by pressing “inbox” icon, you will see a screen as below. 2) all received messages will be shown. 3) it will indicate ...
Page 46
Z020 – evdo modem (user manual) zapp – the next generation network 46/48 4. Troubleshooting q: i cannot connect to the internet? A: please check “environment setting” of program for correct id, password and service number. For proper id, password and service number, please contact service provider f...
Page 47
Z020 – evdo modem (user manual) zapp – the next generation network 47/48 q: after the installation of the program, the program does not run and displays following message a: this means that usb modem and the compute are not connected properly. Please double check whether usb modem is connected prope...
Page 48
Z020 – evdo modem (user manual) zapp – the next generation network 48/48 declaration of conformity we, sc telemobil sa, romania, baloteşti, j. Ilfov, bucharest way no 2b bis, registration number at the registry of commerce no: 1596697, assure, guarantee and declare at ours own risk, in conformity wi...