Zarket WT-206 PRO series User Manual - "rgr".
• Press the " " key to stop and show the lap time while the watch is running.
• Press the" " key again to switch back to stopwatch mode and show the running
time.
• Press the " " or " " key to stop and press " " key to reset.
• Press the"
" key 4 times to exit to the main screen.
Whilst in stopwatch mode the user can transmit and receive on the stored channel.
(18) BABY MONITOR
• Press the"
" key 8 times and the LCD will display the "Baby" icon.
• Press the " " or " " key to monitor sensitivity level from 1 to 3 (low to high
level), OF is turn OFF this function.
• Press PTT to confirm and quit or press "
" key once to confirm the selection and
continue to the next menu feature.
• After turning on this function the LCD will display "Baby" icon on the main
screen.
(19) ROGER BEEP (ON/OFF)
The Roger beep notifies the receiving radio that the conversation has ended by
sounding a beep when the transmitter has finished.
• To activate the roger beep press the "
" key 9 times and the LCD will display
"RGR".
• Press the " " or " " key to turn on ("O" icon) or turn off ("OF" icon) the Roger
beep.
• Press PTT to confirm and exit to the main screen or press the "
" key once to
confirm the selection and continue to the next menu feature.
• After turning on the Roger beep, LCD will display RGR icon.
(20) AUTO POWER OFF (APO)
• Press the "
" key 10 times the LCD displays the
icon.
• Press " " or " " key to select auto power off time from 0 to 12 hours.
• Press PTT button to confirm and return to the main screen or press the"
" key
once to confirm the selection.
• After turning on this function the LCD will display the "
" icon and
automatically turn off at designated time.
(21) SCANNING CHANELLS
• Press "
" key once and the "
" icon will appear and radio will start scanning
through the 190/304 channels automatically.