Zartek cdp-808 multi wireless intercom system users manual za-610 gate station complete including power supply, relay board and external antenna za-611 back/side gate station including power supply, relay board and external antenna za-612 programming kits including cable and software za-613 handsets...
Overview: the zartek wireless multi intercom system is newly developed and three years of r&d in the making. It is fully approved by icasa. Applications for this system include housing complexes, apartments and office blocks, large estates, long driveways etc. This system can accommodate 80 separate...
A motion sensor will detect visitors coming within 3m of the gatestation and the screen and keypad will light-up and be active. There is a back-up battery fitted into the gatestation which will power the unit for 4 hours in case of a power outage. The installer will be equipped with the programming ...
3) the lcd will show “ calli1g “ and beep sound will be heard. At the same time, countdown of 20 sec (20, 19, 18….) will be seen on the lcd and in case no reply from the handset after 20 sec, the calling process will stop and the visitor can repeat step 2 to call again. The lcd will show “ no reply ...
The handset is portable and rechargeable giving you the convenience of answering the gate from anywhere in the house, garden and pool. A large lcd screen indicates house number, ring type, incoming or outgoing calls, door opening etc. Each handset includes a mains adaptor, charging cradle and rechar...
1. Handset calling button k1 to call another handset paired with the same house no., press k1, three beep sound will be heard. Speak only after these three beep sound, release k1 when finish talking to hear reply from opposite party. This is a push-to-talk button so the button must remain pressed in...
F) vibration + ringing tone g) vibration + visual light + ringing tone 7：volume up k7 and volume down k9 press k7 and k9 to select your preferred volume. The ringing tone volume will also be adjusted accordingly. 8: ringing tone time select button k8 press k8 to select the time of ringing tone when ...
2. The resident can reply the call by pressing ptt k3. Now handset signal icon will stay on and the transmit icon (lightning) shows up every time k3 is pressed. Speak only after the two beeps sound or otherwise the visitor will loose some of your words. Release k3 after finish speaking and the unit ...
