1. DL manuals
  2. Zastone
  3. Radio
  4. ZT-9908
  5. User Manual

Zastone ZT-9908 User Manual

Summary of ZT-9908

  • Page 1

    11 contents contents……………………………………..........................................……………………...........….…..............…01 introduction…………………………………………………………………………..…............................................02 included………………………………………………………………………………............................................…02 table of...

  • Page 2

    2 introduction thanks for purchasing 9908 uhf radio. Please read this manual carefully to learn its functions and operations before using. With elegant design, stable performance, and easy-to-use feature, transceiver 9908 is developed for widely using. It offers you a normal communication when you a...

  • Page 3

    3 table of spare parts spare parts unit quantity antenna pc 1 belt clip pc 1 li-ion battery pack pc 1 adapter pc 1 charger pc 1 qualified card pc 1 user manual pc 1 handstrap pc 1.

  • Page 4

    4 features 1.Frequency：430mhz-470mhz 15.Tx/rx ctcss/cdcss adjustable 2.Easy operation by oled display 16.Step5/6.25/10/12.5/20/25/50/100k 3. 7.4v 1800mah li-ion battery 17.Scanning ：vfo/channel 4.Dpmr digital and analog communication 18.Sql（0-9） 5.Analog wide/narrow：25k/12.5k 19.Backlight on/off 6.H...

  • Page 5

    55 specification general transmitter receiver frequency 430-470mhz channel 199 channel spacing digital 6.25khz analog 12.5khz or 25khz working temperature － 20℃～＋60℃ voltage 7.4v standby current (power save) about 40ma output power uhf≤4w tx current hi≤1.6a modulation fm maximum frequency deviation ...

  • Page 6

    66 know the radio scheme 1.Antenna 2.Power/volume knob 3.Indicator light 4.Ptt 5.Key1 6.Key2 7.External sp+mic/program connector/ extended function connector 8.Ocld display 9.Dtmf keypad(1~9,*,#) 10.Mic 11.Speaker 12.Battery 13.Battery buckle 14.Belt clip 15.Hand strap hole.

  • Page 7

    7 menu icon feature note receive 00 ctcss 02 dcs message 03.

  • Page 8

    8 scanning 05 off set 07 signal 08 battery 09 vox 11 reverse frequency （ with this state transmitting and receiving will be reversed， ） 13 high/low 16 channel 17.

  • Page 9

    99 preparation before using install the antenna install the antenna as picture shows and rotate it clockwise till tight. Note: don’t hold the antenna or hang the keys or external mic on the antenna ,in case of destroying the performance of radio ..

  • Page 10

    10 install the battery disassembling of battery install the batter along the rear case of radio press the fixed buckle of the battery(p1),then push properly as following pictures show： down the battery off the transceiver(p2) p1 p1 p2 p2.

  • Page 11

    11 install and take off the belt clip if necessary ,fix the belt clip with two screws (3*6) as picture shows:： install disassembly note:1.When installing the belt clip , do not use any glue to fix screws,otherwise, it will damage the housing. 2. Take off the belt before disassembling the battery..

  • Page 12

    12 12 install external microphone install the microphone as picture shows,： charging the battery pack is not fully charger when finished,and please charge it before using the battery can not reach the normal capacity for the first time charging after purchasing or storing it more than two months.How...

  • Page 13

    13 13 charging steps as below： 1. Insert the ac adaptor line to the charging hole of desk-top . 2. Connect the power with ac adaptor. 3.Put li-ion battery or radio with battery on the desk top. As following pictures show p1 p2 p3 note: 1.Please make sure the battery connect with the touching piece o...

  • Page 14

    14 basic functions 1）power on /off turn power on/off by power key . Please input password if setted,operate like this ： (1) input password when lcd display：“――――――” (2)inputting 0-9 by dtmf keys and display corresponding interface。 (3)after input ,transceiver check password automatically . If yes, t...

  • Page 15

    15 (2) press（ / ） to choose id code on the contact list。 (3) press 【ptt】to transmit note : press ptt to transmit and get default contact . If not ,transceiver reminds users no contact available . Single call to input contact person . Group call only for program . Dtmf （analog mode） (1) press【dtmf】（p...

  • Page 16

    16 can receive information once transceiver gets match id from group/single/all call. Press ptt to communicate within limited time . Menu operation 1）menu operation (1) press（ ） ； (2) press（ / ） to choose menu ，long press （ ） to get hot menu if transceiver with dtmf keys，press dtmf no.Keys to get co...

  • Page 17

    17 (7) 10s for operating any menu .Once over 10s ,transceiver quit and back tot main interface . Note :1 no limited time for message editing . 2 while operating ,press ptt to back main interface and no confirmation . 2) menu setting list（digital mode） item chinese english chinese menu english menu 1...

  • Page 18

    18 6* 联系人 contacts 64 组，号码中可带(*) 7* 发件箱 msg outbox 短信息发送列表（最大 20 条） 8* 收件箱 msg inbox 短信息接收列表（最大 20 条） 8 带宽设置 w/n band (1)宽带 (2)窄带 (1)width (2)narrow 10* 话音加密 encrypt (1)关 (2)开 (1)off (2)on 11 密钥列表 erp list 32 位密钥 12 时间显示 time (1)关 (2)开 (1)off (2)on 13* 日期 /时间 date and time —— 14 差频方向 shift (1)无 (2)正...

  • Page 19

    19 17 省电设置 batt saver (1) 关 (2) 1：1 ………. (11) 1:10 (12) 1:11 (13) 1:12 (1)off (2)1:1 ……… (11) 1:10 (12) 1:11 (13) 1:12 18 超时设置 tot 0～600s，步进 30s 19 背光灯模式 backlight (1)关 (2)开 (3)自动 (1)off (2)on (3)auto 20 提示音设置 beep tone (1)关 (2)开 (1)off (2)on 21 开机密码 password (1)关 (2)开 (1)off (2)on 22 声控设置 vox (1)关 ...

  • Page 20

    20 25 频率模式扫描 vfo scan (1) ±1mhz (2) ±2mhz (3) ±5mhz (4) pms (5) band 26 语言设置 language (1)英文 (2)中文 (1)english (2)chinese note : the menu with * operation ,please refer to the following details. Menu operating list（md mixed digital mode ） note : only menu 26 in the mode of digital transmitting and not...

  • Page 21

    21 (10)9 级 (10)sql-9 5* 本机码 local code 七位 id 号码（不带*） 6* 联系人 contacts 64 组，号码中可带(*) 7* 发件箱 msg outbox 短信息发送列表（最大 20 条） 8* 收件箱 msg inbox 短信息接收列表（最大 20 条） 9* 带宽设置 w/n band (1)宽带 (2)窄带 (1)width (2)narrow 10* 话音加密 encrypt (1)关 (2)开 (1)off (2)on 11 密钥列表 erp list 32 位密钥 12 时间显示 time (1)关 (2)开 (1)off (2)on ...

  • Page 22

    22 (3)负差频 (3)minus 18 频率步进 step (1)5.0khz (2)6.25khz (3)10.0khz (4)12.5khz (5)25.0khz (6)50khz (7)100khz 19 差频频率 offset 0～50mhz，默认 0.6mhz（vhf）/7.6mhz（uhf） 20* 哑音解码 r ctc/dcs 无 /63.0hz~254.1hz/dn023~di754 21* 哑音编码 t ctc/dcs 22 省电设置 batt saver (1) 关 (2) 1：1 ………. (11) 1:10 (12) 1:11 (13) 1:12 (1)off (2...

  • Page 23

    23 (2)开 (2)on 27 声控设置 vox (1)关 (2)开 (1)off (2)on 28 声控灵敏度 vox level (1)0 级 … (6)5 级 … (10)9 级 (1)level 0 … (6)level 5 … (10)level 9 29 扫描模式 scan mode (1)时间 (2)载波 (3)搜索 (1) to (2) co (3) se 30 频率模式扫描 vfo scan (1) ±1mhz (2) ±2mhz (3) ±5mhz (4) pms (5) band 31 语言设置 language (1)英文 (2)中文 (1)english (2)ch...

  • Page 24

    24 (3)频率模式 (3) vfo mode 2 频道类型 ch type (1)模拟频道 (2)数字频道 (3)混合频道-数字发射 (3)模拟频道-模拟发射 (1)analog (2)digital (3)mixer-d (4)mixer-a 3 发射功率 tx power (1)低功率 (2)高功率 (1)low (2)high 4 静噪等级 sql (1)0 级 … (6)5 级 … (10)9 级 (1)sql-0 … (6)sql-5 … (10)sql-9 5* 本机码 local code 七位 id 号码（不带*） 6* 联系人 contacts 64 组，号码中可带(*) ...

  • Page 25

    25 (2)开 (2)on 13* 日期 /时间 date and time —— 14 可选信令 signallin g (1)无 (2)双音多频 (1)none (2)dtmf 15 双音多频速率 dtmf speed (1)50 毫秒 (2)75 毫秒 (3)100 毫秒 (1)50ms (2)75ms (3)100ms 16 双音多频列表 dtmf list dtmf- 01~dtmf-16 17 差频方向 shift (1)无 (2)正差频 (3)负差频 (1)none (2)plus (3)minus 18 频率步进 step (1)5.0khz (2)6.25khz (3)10....

  • Page 26

    26 ………. (11) 1:10 (12) 1:11 (13) 1:12 ……… (11) 1:10 (12) 1:11 (13) 1:12 23 超时设置 tot 0～600s，步进 30s 24 背光灯模式 backlight (1)关 (2)开 (3)自动 (1)off (2)on (3)auto 25 提示音设置 beep tone (1)关 (2)开 (1)off (2)on 26 开机密码 password (1)关 (2)开 (1)off (2)on 27 声控设置 vox (1)关 (2)开 (1)off (2)on 28 声控灵敏度 vox level (1)0 级 … (...

  • Page 27

    27 (4) pms (5) band 31 语言设置 language (1)英文 (2)中文 (1)english (2)chinese note : the menu with * operation ,please refer to the following details. Menu operating list（analog mode） item 中文显示 english 中文菜单项 english menu 1 工作模式 mode (1)信道模式 (2)记忆模式 (3)频率模式 (1) ch mode (2) mr mode (3) vfo mode 2 频道类型 ch typ...

  • Page 28

    28 (2)开 (2)on 7* 日期 /时间 date and time —— 8 可选信令 signallin g (1)无 (2)双音多频 (1)none (2)dtmf 9 双音多频速率 dtmf speed (1)50 毫秒 (2)75 毫秒 (3)100 毫秒 (1)50ms (2)75ms (3)100ms 10 双音多频列表 dtmf list dtmf- 01~dtmf-16 11 差频方向 shift (1)无 (2)正差频 (3)负差频 (1)none (2)plus (3)minus 12 频率步进 step (1)5.0khz (2)6.25khz (3)10.0kh...

  • Page 29

    29 ………. (11) 1:10 (12) 1:11 (13) 1:12 ……… (11) 1:10 (12) 1:11 (13) 1:12 17 超时设置 tot 0～600s，步进 30s 18 背光灯模式 backlight (1)关 (2)开 (3)自动 (1)off (2)on (3)auto 19 提示音设置 beep tone (1)关 (2)开 (1)off (2)on 20 开机密码 password (1)关 (2)开 (1)off (2)on 21 声控设置 vox (1)关 (2)开 (1)off (2)on 22 声控灵敏度 vox level (1)0 级 … (...

  • Page 30

    30 (4) pms (5) band 25 语言设置 language (1)英文 (2)中文 (1)english (2)chinese note : the menu with * operation ,please refer to the following details. 3) hot key instruction（main interface long press 【menu】） hot key function note ch mr vfo func+1：mode √ √ √ enter corresponding menu by key ×5 func+2：txp √ √...

  • Page 31

    31 power on +【1】 √ √ √ enter power on function menu。 factory setting ,clone ,aging test ,adjust ,upgrade . Note: press until orange lights menu power on +【2】 √ √ √ enter ber tes mode note: press until orange lights main interface power on +【3】 √ √ √ enter hardware upgrade menu . Note : press until o...

  • Page 32

    32 5 j>k>l>5 6 m>n>o>6 7 p>q>r>s>7 8 t>u>v>8 9 w>x>y>z>9 0 space>0 note : with channel mode ,edit channel information by selecting the channel ,and double click on the right side editing box in program software . Programmable key function programmable key：side key 1 by short press、side key 1 by long...

  • Page 33

    33 scan press 【scan 】（programmable ），then scanning with displayed icon .Press up/down to choose scanning setting ,press other keys to quit scanning . Only allowed scanning channel can be scanned .It is waving scanning and once stop the channel ,that means get signals .After signal goes off ,transcei...

  • Page 34

    34 3）scan revert scan revert channel fixes the present scanned channel ,press ptt to transmit information during scanning . 4）scan delete/add set scan delete/add to the present channel by menu operation and allowed to be scanned or not .Please refer to scan . 5）vfo scanning vfo scanning can scan the...

  • Page 35

    35 (2) input dtmf to dial a call with key tone (program by pc) . 2）dialed code store and transmit（only available with transceiver with dtmf keys） (1) press dtmf code ,then display inputing dtmf code。 (2) with finish dialing ,press ptt to transmit . Note : only 16 dtmf code available once when dialin...

  • Page 36

    36 dprm 1）contact list operation press 【s2】to add or delete contact person ,press “*” to exit.Present contact person displays on the contact list .Users can choose anyone to edit some information . 1. Press（ ） ； 2. Press（ / ） to choose ：contacts； 3. Press（ ） ， then by （ / ） to choose effective conta...

  • Page 37

    37 2) press ptt to quit operation when setting . With being in contact list menu, ,press ptt to transmit and id code will be the present chosed id . 2）message sending 1. Press （ ）； 2. Press（ / ） to choose：sending box； 3. Press（ ） to get sending box menu and display effective message number. “message...

  • Page 38

    38 3）message received checking . 1. Press（ ） ； 2. Press（ / ） to choose ：msg inbox； 3. Press（ ） to choose msg inbox，then will display the state of message （ ： unread； read）and sender name or id ； 4. Press（ / ） to choose message； 5. Press（ ）， to edit message，press （ / ） to check message。will display t...

  • Page 39

    39 emergency calls hold down for specified time period to transmit an emergency call which can be programmed . Off : make this function unable ,but still can receive emergency call from other working transceivers . Transceiver alarm : alarm only itself ( receive+no code sending+beeper ) normal : tra...

  • Page 40

    40 digital mode only . Once voice encryption is on ,other working transceiver can not monitor any information from this encrypted transceiver. Monitor press monitor key to monitor any transceiver with unmatched code in digital mode. Monitor other working transceiver with squelch function in analog m...

  • Page 41

    41 4. Press （ / ） to choose ctcss frequency or dcs code； 5. Press 【s2】to exchange among ctcss、+dcs、+dcs。 6. Press（ ） to confirm setting and back to previous menu .Press【*】key quit to confirm and back to previous ；press【s2】to quick exchange ctc/dcs list；press【ptt】to quit . Note: press ptt to exit the...

  • Page 42

    42 transmitting . If not ,tot count from previous time .. 2）power save 1transceiver will enter power save state ,if there is no signal or no operation (key input, rotating etc) .The power save ratio:1:4. 3）key lock long press【func】to lock keypad or unlock.. With key lock ,the following keys are stil...

  • Page 43

    43 5）signal indication oled displays present receiving signal level ,please refer to following icon for details. 6）bclo once transceiver active bclo function ,the present channel is prohibit to transmit ,need to waiting for free time to transmit. Bclo ignored with setting prohibited transmitting on ...

  • Page 44

    44 value is less than minimum ,will cycle to maximum,otherwise to minimum. 2）frequency direct typing transceiver with dtmf keys can direct to type frequency number。 for example 1：typing frequency 410.75000 mhz [4], [1], [0] 4 1 0. - - - - - [7], [5], [0] 4 1 0. 7 5 0 0 0 for example 2：typing frequen...

  • Page 45

    45 2）direct to input channel no. Key in channel no.With dtmf code ,if transceiver has dtmf keys. For example 1：input channel no .001 [0], 0 - - [0], 0 0 - [1] 0 0 1 note:transceiver will back to present channle when input invalid channel number . Id code/dtmf code input （ 1）press【#】to dial menu . Wi...

  • Page 46

    46 46 trouble shooting trouble solution no reaction when power-on ●the battery pack has been exhausted. Please change a new battery or recharge the battery. ● the battery pack may be not installed correctly. Please install it again. Unable to talk with other members in the same group ● please check ...

  • Page 47

    47 appendix ctcss and dcs ctcss 50 67.0 85.4 107.2 136.5 165.5 186.2 210.7 254.1 69.3 88.5 110.9 141.3 167.9 189.9 218.1 71.9 91.5 114.8 146.2 171.3 192.8 225.7 74.4 94.8 118.8 151.4 173.8 196.6 229.1 77.0 97.4 123.0 156.7 177.3 199.5 233.6 79.7 100.0 127.3 159.8 179.9 203.5 241.8 82.5 103.5 131.8 1...