1. DL manuals
  2. Zaurus
  3. PDA
  4. SL-C3000
  5. Instruction Manual

Zaurus SL-C3000 Instruction Manual

Manual is about: Zaurus PDA Instruction manual

Summary of SL-C3000

  • Page 1

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 1 of 212 16/09/2007 12:23 my zaurus sl-c3000 and sl-c3100

  • Page 2

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 2 of 212 16/09/2007 12:23 sharp zaurus sl-c3000 and sl-c3100 © copyright 2006 hd luc (hdluc@yahoo.Com) i got the zaurus sl-c3000 and sl-c3100. These impressive little devices are almost perfect. They are made by sharp, however, ...

  • Page 3

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 3 of 212 16/09/2007 12:23 specs: features: intel xscale pxa270 cpu at 416mhz 640x480 transreflective touch screen, 3.7" diagonal, backlit 4 gb internal hard drive 64 mb memory (sdram) 16 mb internal flash for sl-c3000 / 128 mb i...

  • Page 4

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 4 of 212 16/09/2007 12:23 the standards for usb are defined by the usb-if (usb - implementers forum). The otg 1.0 is a new extension to the usb 2.0 specifications. Usb 2.0 defines the following speeds: usb 2.0 high speed - 480mb...

  • Page 5

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 5 of 212 16/09/2007 12:23 in australia, the power adaptor was a little problem with the sl-c3000 since it only came with a 100v power adaptor and i needed to find a compatible adaptor. Both dicksmith and tandy have a relatively ...

  • Page 6

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 6 of 212 16/09/2007 12:23 x windows on the z. The keyboard i normally only use with my zaurus when i need to type a lot. Almost any standard usb keyboard should work with the zaurus. The keymapping needs some adjustments since t...

  • Page 7

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 7 of 212 16/09/2007 12:23 additionally, i had to get the following from tokyo since i could not get them locally in australia. Thanks again to sachiko for going shopping for me. The iriver usb cable works with the zaurus. This c...

  • Page 8

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 8 of 212 16/09/2007 12:23 support this speed. While in thailand, i went to the pantip it mall in bangkok and found a few extra goodies. The most useful item i believe was the sony mdr-138 super bass headphones (i don't think son...

  • Page 9

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 9 of 212 16/09/2007 12:23 kiokudojo (memory trainer) mobilemap norikae (transfer guide) database the c3000 requires that you update/add the following software wheras the c3100 already comes with the updated versions of these: mu...

  • Page 10

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 10 of 212 16/09/2007 12:23 opie-reader - [opie-reader_0.7h_arm.Ipk] opie-security - [opie-security_1.5.0-20020319_arm.Ipk] opie-wellenreiter - [opie-wellenreiter_1.0.2.1-20031220_arm.Ipk] opieftp - [opieftp_0.9.1-20020702_arm.Ip...

  • Page 11

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 11 of 212 16/09/2007 12:23 top - [top_0.3.6_arm.Ipk] unrar - [unrar_3.5.4-lite-1_arm.Ipk] unzip - [unzip_5.24_arm.Ipk] vim - [vim_6.1_arm.Ipk] wget - [wget_1.10.2_arm.Ipk] zip - [zip_2.3_arm.Ipk] services and runtimes apache - [...

  • Page 12

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 12 of 212 16/09/2007 12:23 libfloat - [libfloat_1.0_arm.Ipk] libiconv - [libiconv_1.8-2_arm.Ipk] libmad - [libmad_0.14.2b-1_arm.Ipk] libncurses - [libncurses_5.0_arm.Ipk] libogg - [libogg_1.1.2-1_arm.Ipk] libopie1 - [libopie1_1....

  • Page 13

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 13 of 212 16/09/2007 12:23 heretic - [heretic-demo_1.2-3_arm.Ipk] [heretic-engine_1.0.4-2_arm.Ipk] ctux (cyclone tux) - [ctux_1.0.0_arm.Ipk] dtux (dancing tux) - [dtux_1.0.0_arm.Ipk] well, tux isn't really a game but it is funny...

  • Page 14

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 14 of 212 16/09/2007 12:23 [ zflite-gui_0.2_arm.Ipk ] - flite gui [ filelaunch-en_0.4.5_arm.Ipk ] - (not fully translated yet, but usable) [ opera-en-helper_0.0.2b_arm.Ipk ] - opera config gui (translated from japanese) [ automo...

  • Page 15

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 15 of 212 16/09/2007 12:23 [xqt-debian-jumbo-lite_4.3-0.7.1_arm.Ipk] - x/qt jumbo lite for debian [xqt-debian-install.Sh] - x/qt debian install script [zaurus-debian-jumbo-v18-b01.Tar.Gz] - debian tarball [zaurus-debian-doc-v18....

  • Page 16

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 16 of 212 16/09/2007 12:23 [xchat_2.6.0_arm.Ipk] - irc client [xmms_1.2.10-4_arm.Ipk] - media player [xpad_2.11_arm.Ipk] - sticky pad [xpdf_3.01-4_arm.Ipk] - pdf viewer [xpdf-tools_3.01-4_arm.Ipk] - pdf extraction tools [xournal...

  • Page 17

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 17 of 212 16/09/2007 12:23 most information about the sl-c3000 found on the net is in japanese and a lot of the instructions out there are for earlier models of the zaurus. Although a lot of that info is still valid because the ...

  • Page 18

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 18 of 212 16/09/2007 12:23 these are very useful runtimes and often, other useful services or applications depend on having these runtimes: runtimes samba - allows sharing of files over network jeode - java runtime perl - perl i...

  • Page 19

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 19 of 212 16/09/2007 12:23 in addition, with a console, you can use the ipkg command to install and uninstall applications as well, eg: # ipkg install ipkfile # ipkg remove ipkfile the advantage of the ipkg tool that it can be u...

  • Page 20

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 20 of 212 16/09/2007 12:23 installing a terminal connect the zaurus via usb (make sure to plug the usb cable into the pc first, then the zaurus). Copy the terminal ipk file [qpe-terminal-ja_1.5.0-3_arm.Ipk] from the cd-rom into ...

  • Page 21

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 21 of 212 16/09/2007 12:23 [language] language = en [location] timezone = australia/sydney reboot the zaurus. Localising to english but keeping japanese: (english menus, mixed japanese and english titles) the goal of this locali...

  • Page 22

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 22 of 212 16/09/2007 12:23 this package [ c3000-custom-jaen_0.2_arm.Ipk ] will do the above and is what i use to recover my localisation if i need to reset my zaurus to factory setting and start again. This package works for the...

  • Page 23

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 23 of 212 16/09/2007 12:23 lcfont fixed helvetica (same as mico-unicodefonts-helvetica_1.5.0-1_arm.Ipk) micro smallsmooth smoothtimes unfortunately, the japanese character mapping has some overlaps and it is not always possible ...

  • Page 24

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 24 of 212 16/09/2007 12:23 # cp arial.Ttf /hdd3/build/lib/fonts # export qtdir=/hdd3/build # cd $qtdir/lib/fonts # echo "arial arial.Ttf ft n 50 160 s" > fontdir # makeqpf-arm -display transformed:rot0 -a # makeqpf-arm -display ...

  • Page 25

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 25 of 212 16/09/2007 12:23 it will give you the following mappings: sticky shift key - press the shift key and the next key you press will be shifted sticky fn key - press the fn key and the next key you press will be the blue o...

  • Page 26

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 26 of 212 16/09/2007 12:23 ctrl + 2 = È (e with grave) ctrl + 3 = é (e with acute) ctrl + 4 = É (e with acute) ctrl + 5 = ê (e with circumflex) ctrl + 6 = Ê (e with circumflex) ctrl + 7 = ë (e with diaeresis) ctrl + 8 = Ë (e wit...

  • Page 27

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 27 of 212 16/09/2007 12:23 the following is my mapping: dictionary -- dictionary calendar -- qkonsole address -- musicplayer mail -- netfront home -- home menu -- menu and here are some useful keyboard shortcuts for qkonsole: fn...

  • Page 28

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 28 of 212 16/09/2007 12:23 fn + m will kill x/qt if your keys turn all caps then just hold down the shift key for a few seconds and they will turn back to lower case. File associations the file association information is derived...

  • Page 29

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 29 of 212 16/09/2007 12:23 the c3000 and c3100 have a larger screen resolution (640x480) than the older models. Older applications designed for those models by default start in portrait mode (because that is their default mode)....

  • Page 30

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 30 of 212 16/09/2007 12:23 to do that, tab on the application icon and hold the stylus there for a few seconds and a properties screen will appear. Tick the option "execute with root priviledge". Application preloading some appl...

  • Page 31

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 31 of 212 16/09/2007 12:23 customising the startup screen is possible. The startup image is a 90 degrees rotated bmp file (480x640) with a 24bit colour depth called startup_screen.Bmp. You simply need to copy it to the correct l...

  • Page 32

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 32 of 212 16/09/2007 12:23 use the appearance application under the settings tab, your selected image will be tiled unless you pick an image that exactly fits the screen (640x420 or 480x620 minus the qtbar) depending on which yo...

  • Page 33

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 33 of 212 16/09/2007 12:23 the default screensaver on the c3000 and c3100 is rather ugly. You can replace it with something much better. To do that install the following: lusscreensaver - [lusscreensaver_1.4.6-1_arm.Ipk] lusscre...

  • Page 34

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 34 of 212 16/09/2007 12:23 in addition, you can customise the icons that are displayed for each application on the menu, and also the icons displayed for the applications according to their mime associations. The icons for the m...

  • Page 35

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 35 of 212 16/09/2007 12:23 the following is a list of the names of the icons that need to be replaced in order to change the look and feel of the default qtopia desktop. Since some of these icons are symbolic links, the symlinks...

  • Page 36

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 36 of 212 16/09/2007 12:23 helpbrowser icon - helpbrowser.Png musicplayer icon - musicplayer.Png netfront icon - nf_logo.Png (pics only) photostorage icon - photostorage.Png (pics only) menu and file manager: start button - go.P...

  • Page 37

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 37 of 212 16/09/2007 12:23 kino icon - kino.Png konsole icon - konsole.Png lanconfig icon - lanconfig.Png laptop icon - laptop.Png microphone icon - microphone.Png mysql icon - mysql.Png paint icon - paint.Png screen icon - scre...

  • Page 38

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 38 of 212 16/09/2007 12:23 you can change the bash prompt by changing the ps1 variable definition to something simple like zaurus-:) or even something fancy with different colours. If you don't have a .Bashrc file, you can just ...

  • Page 39

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 39 of 212 16/09/2007 12:23 on the c3100. Luckily, this 89mb is located on a jffs2 filesystem which has built-in compression so we could be able to install around 200-300mb of applications and stuff if we are lucky. Still, we wil...

  • Page 40

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 40 of 212 16/09/2007 12:23 alternatively, if you don't need your zaurus to act like a usb drive, or your pc runs linux, then you could just reformat the entire /hdd3 to linux filesystem. You might also consider creating a small ...

  • Page 41

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 41 of 212 16/09/2007 12:23 disk /dev/hda: 4095 mb, 4095737856 bytes 16 heads, 63 sectors/track, 7936 cylinders units = cylinders of 1008 * 512 = 516096 bytes device boot start end blocks id system /dev/hda1 1 256 128992+ 82 linu...

  • Page 42

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 42 of 212 16/09/2007 12:23 the c3000 and c3100 come with a backup and restore tool which is located under the settings tab. Use this application to backup your zaurus. It allows you to backup your system (flash, applications and...

  • Page 43

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 43 of 212 16/09/2007 12:23 the zaurus backup tool basically shuts down qtopia so all open files are closed and then tars up /hdd2 and /home which become the backup image. This is much safer than the above approach while qtopia i...

  • Page 44

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 44 of 212 16/09/2007 12:23 this is the emergency partition that you usually don't see. You will need to manually mount the usual partitions if you want to access them. /home is /dev/mtdblock3 and /dev/mtdblock2 is your root part...

  • Page 45

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 45 of 212 16/09/2007 12:23 hold the "ok" key on the keyboard or the back of the zaurus and turn on the device with the "on/off" button. You should see the maintenance menu and select option 4 to update/flash the rom. Select eith...

  • Page 46

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 46 of 212 16/09/2007 12:23 however, you can also manually configure the network without using the network config applet. The config files it generates are located under /home/zaurus/applications/network/modules and are called wl...

  • Page 47

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 47 of 212 16/09/2007 12:23 # net -resume (manually force network to resume) here is a sample config file for a private network: dhcpc=no ip=192.168.1.2 netmask=255.255.255.0 domain= gateway=192.168.1.1 proxy=0 proxyhost= proxypo...

  • Page 48

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 48 of 212 16/09/2007 12:23 zaurus drivers (network) (you only need the last option for the usb network) restart windows when the install has finished. The usb network driver is now installed and zaurus manager should had started...

  • Page 49

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 49 of 212 16/09/2007 12:23 now, on to the zaurus side of the configuration. Run the pc link tool from the settings tab and select pc link setting, then select connection usb-tcp/ip (advanced). Now just connect the usb cable (usb...

  • Page 50

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 50 of 212 16/09/2007 12:23 the ircomm driver, you can setup a new network connection (direct connection) using irda as the device and setting up windows as the client with no password prompt. On the zaurus, you will need to do t...

  • Page 51

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 51 of 212 16/09/2007 12:23 stop to stop it. Using bluetooth for networking: if you have a cf bluetooth card or a bluetooth usb dongle, then you can set up a pan (personal area network) with other bluetooth enabled devices. In th...

  • Page 52

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 52 of 212 16/09/2007 12:23 by default, a samba service is already installed on the zaurus. It is used when you synchronise your zaurus with your pc while the usb cable is plugged in. You can also manually start and stop the samb...

  • Page 53

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 53 of 212 16/09/2007 12:23 # ln -s /usr/lib/samba/smb.Conf smb.Conf once you install sambacontroller, you can use it to start and stop samba, as well as modify smb.Conf from the configure tab. You should also install smbpasswd [...

  • Page 54

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 54 of 212 16/09/2007 12:23 if you want your zaurus to be accessed via ssh as well, then you need to install the following: openssl - [openssl_0.9.7d_arm.Ipk] openssh-server [openssh-server_3.6.1p1_arm.Ipk] openssh-addon - [opens...

  • Page 55

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 55 of 212 16/09/2007 12:23 # vi /etc/inetd.Conf ftp stream tcp nowait root /usr/sbin/tcpd in.Ftpd -l -a # /etc/rc.D/init.D/inet restart make sure you use tcp wrapper as it is slightly more secure. Then enable tcp wrapper securit...

  • Page 56

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 56 of 212 16/09/2007 12:23 alternatively, you can also install boa [boa_0.94.12_arm.Ipk] which is a light-weight http daemon if you just want simple web server. Browsers there are several browsers available such as netfront, ope...

  • Page 57

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 57 of 212 16/09/2007 12:23 # su # /usr/local/bin/fbvncinput stop # killall qpe if you want to re-enable the keyboard and mouse, then just recreate the the symbolic link to fbvncinput and reboot your zaurus: # su # ln -s /usr/loc...

  • Page 58

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 58 of 212 16/09/2007 12:23 mounting samba shares install the following packages: libncurses - [libncurses_5.0_arm.Ipk] smbmount - [smbmount_0.1_arm.Ipk] smbmounter - [smbmounter_0.1-2_arm.Ipk] to mount a drive type: # smbmount /...

  • Page 59

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 59 of 212 16/09/2007 12:23 if [ $? = 0 ]; then ln -s /mnt/usbstorage /home/samba/usb_storage ln -s /etc/hotplug/usb/usb-storage.Off $remover mesg make remover in $remover fi fi # chmod 755 /etc/hotplug/usb/usb-storage # vi /etc/...

  • Page 60

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 60 of 212 16/09/2007 12:23 /etc/rc.D/init.D/mntloop (automounter) to check for the presence of a swapfile and enabling it when the card is mounted and disabling it when the card is unmounted. The sd card is auto mounted by the /...

  • Page 61

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 61 of 212 16/09/2007 12:23 by default /tmp is mounted from /dev/shm as a 1mb tmpfs. This 1mb is taken from the 64mb of ram and for most applications, 1mb of tmp is sufficient. However, some applications such as kismet or qpdf2 m...

  • Page 62

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 62 of 212 16/09/2007 12:23 mount 2 loop partitions because there are only that many default loop devices, so any additional entries in /etc/fstab will fail to mount. Mntloop will mount any additional entries it finds after creat...

  • Page 63

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 63 of 212 16/09/2007 12:23 # ln -s /home/expansion/usr/local /home/root/usr/local once you have tested that everything still works, you can remove /home/root/usr/local.Bak make sure you install the automounter package [automount...

  • Page 64

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 64 of 212 16/09/2007 12:23 to the following sleep 3 enabling irda the zaurus has an irda port build-in, but for security and power saving, it is disabled by default. You can temporarily enable it to receive files. Use the ir-rec...

  • Page 65

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 65 of 212 16/09/2007 12:23 enabling bluetooth the stock sharp rom does not come with bluetooth enabled. You can add bluetooth capability to the zaurus by either using a cf bluetooth card or a usb bluetooth dongle. I've tested th...

  • Page 66

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 66 of 212 16/09/2007 12:23 xx:xx:xx:xx:xx:xx k750i xx:xx:xx:xx:xx:xx oqou1 xx:xx:xx:xx:xx:xx c3000 to find out the capabilities of those devices do the following with their corresponding mac address: # sdptool browse xx:xx:xx:xx...

  • Page 67

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 67 of 212 16/09/2007 12:23 setting up a bluetooth pan (personal area network) a pan allows you to access services on the other bluetooth enabled devices like on a small network with tcp/ip connectivity. This requires that the ot...

  • Page 68

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 68 of 212 16/09/2007 12:23 alternatively, you could also use the pan applet in the network config tool to do the same thing or use my bluetooth-gui script. Setting up a bluetooth dialup connection you can also use bluetooth to b...

  • Page 69

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 69 of 212 16/09/2007 12:23 # obextool push file.Ext xx:xx:xx:xx:xx:xx 6 the bluetooth gui allows you to convenniently select files to be beamed over. To receive a file on your zaurus via the bluetooth interface, an obex server [...

  • Page 70

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 70 of 212 16/09/2007 12:23 # su # cd /home/qtpalmtop/plugins/applets # cp /home/zaurus/documents/custom/libusbmouseapplet.So.1.0 . # ln -s libusbmouseapplet.So.1.0 libusbmouseapplet.So.1.0.0 # ln -s libusbmouseapplet.So.1.0 libu...

  • Page 71

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 71 of 212 16/09/2007 12:23 enabling webcam you can use some usb webcams. You will need video4linux support for the kernel (videodev.O) and an appropriate video driver for the webcam. I currently have compiled drivers that work w...

  • Page 72

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 72 of 212 16/09/2007 12:23 see video conversion section on how to re-encode and compress the videos for optimal viewing on the zaurus. Enabling microphone you can plug any 3.5mm microphone into the zaurus. Since there is only on...

  • Page 73

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 73 of 212 16/09/2007 12:23 renders it to the monitor. However, the vga application crashes after a while so it needs a bit more work to iron out the bugs and fix the instability. The image on the monitor remains even when reboot...

  • Page 74

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 74 of 212 16/09/2007 12:23 once you have either configured a usb bluetooth dongle or a bluetooth cf card, you can transfer files between the mobile and the zaurus wirelessly using the obex via bluetooth mechanism. See the blueto...

  • Page 75

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 75 of 212 16/09/2007 12:23 tty1 ttyusb0 disable all non-essential listening ports disable telnet (port 23) if running shutdown ftp server if not used (port 21) shutdown samba server and portmap (port 111) when not in use shutdow...

  • Page 76

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 76 of 212 16/09/2007 12:23 console and providing the required settings: # su # vpnc-connect to terminate the vpn session issue the following command: # su # vpnc-disconnect sudo don't do this on cacko. This is for sharp rom only...

  • Page 78

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 78 of 212 16/09/2007 12:23 log: bochsout.Txt panic: action=ask error: action=report info: action=report debug: action=ignore private_colormap: enabled=0 i also tried xqt-bochs_2.1.1-1_arm.Ipk which appears to be a bit faster tha...

  • Page 79

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 79 of 212 16/09/2007 12:23 dosbox allows you to run dos applications and games. The advantage over bochs is that it is dedicated and preconfigured to run dos applications. Chyang has built a version of dosbox that runs on the c3...

  • Page 80

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 80 of 212 16/09/2007 12:23 zbasilisk basilisk [zbasiliskii_0.3_arm.Ipk] also works on the z. Since i already have basiliskii running on my pc, i simply copied the whole macos7.Hfv file and the rom image to the z and then loaded ...

  • Page 81

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 81 of 212 16/09/2007 12:23 japanese/english and english/japanese. I need more languages such as german, french and chinese. Zdict is the dictionary that comes with the zaurus. It seems to be almost the same with zten which is me...

  • Page 82

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 82 of 212 16/09/2007 12:23 place the files under a directory such as /hdd3/documents/dictionaries and do an autodetect in zbedic to locate them. Kanjinirvana [kani_1.2.0_arm.Ipk] is a kanji dictionary and practice tool. The foll...

  • Page 83

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 83 of 212 16/09/2007 12:23 babbletower [babbletower_0.9.3_arm.Ipk] is another dictionary reader written in java. You need to install one of the j2me implementations for zaurus (jeode or personal profile) before you can use babbl...

  • Page 84

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 84 of 212 16/09/2007 12:23 unfortunately, this means that mbrola is pretty useless until freetts has been backported to java 1.3 which is not an easy task because freetts uses a lot of the 1.4 features not available in 1.3, or u...

  • Page 85

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 85 of 212 16/09/2007 12:23 file managers the default file manager (the files tab) on the zaurus is rather limited in functionality. There are, however, some better packages out there. Tree!Explorer qt [treeexplorer_1.7.0-2_arm.I...

  • Page 86

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 86 of 212 16/09/2007 12:23 this application is for moving and copying files around only. The good thing about it is that it contains two tabs which represent two different directory locations between which files can be easily mo...

  • Page 87

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 87 of 212 16/09/2007 12:23 [filelaunch_0.4.5_arm.Ipk] this application is great and heavily customisable. You can have a single explorer panel or split the screen into two panels either horizontally or vertically. It has a full ...

  • Page 88

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 88 of 212 16/09/2007 12:23 this is a nice console application like norton commander. It has all the file management features that one would need and also works with ftp. However, it uses the extended character set to draw the bo...

  • Page 89

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 89 of 212 16/09/2007 12:23 ksharppim-dtmaccess [ksharppim-dtmaccess_2.1.2_arm.Ipk] this is used to sync ka/pi and ko/pi with the sharp pim applications on the zaurus, which use the new sharp dmt pim format. Kmobilephoneaccess [m...

  • Page 90

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 90 of 212 16/09/2007 12:23 midp if you also want to run java applications that run on your mobile phone, ie midp flavour of j2me then you need to install me4se and the midp game and media classes (which you can extract from the ...

  • Page 91

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 91 of 212 16/09/2007 12:23 name. I have also created midp-launcher [midp-launcher_0.2_arm.Ipk] which is a qshdlg script providing a gui game selector to launch game files located under /home/zaurus/documents/games/j2me. It also ...

  • Page 92

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 92 of 212 16/09/2007 12:23 # ln -s /usr/lib/libstdc++-3-libc6.1-2-2.10.0.So /usr/lib/libstdc++-libc6.2-2.So.3 if you don't have the libstdc++ library then install this libstdc6_1.2.2_arm.Ipk package. Remember that if you want to...

  • Page 93

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 93 of 212 16/09/2007 12:23 # mount -o loop /hdd3/java.Cramfs /mnt/java # echo "/hdd3/java.Cramfs /mnt/java cramfs loop 0 0" >> /etc/fstab # /mnt/java/java-setup see the x/qt jumbo section for more details. You will need x/qt if ...

  • Page 94

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 94 of 212 16/09/2007 12:23 of dsl made by speculatrix. You can download is from http://www.Zaurus.Org.Uk/downloads.Html there are several on-board development images as well, but none had everything i needed, so i built my own o...

  • Page 95

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 95 of 212 16/09/2007 12:23 if you have the 2.95.3 image, then you can also compile qt 3.3.6 applications. However, the default environment is configured for qt/e development. To switch to qt 3.3.6, do the following: # source /mn...

  • Page 96

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 96 of 212 16/09/2007 12:23 xlibs [xlibs_4.3.0-3_arm.Ipk] xbase-client [xbase-clients_4.3.0-3_arm.Ipk] gdk-pixbuf [gdk-pixbuf_0.22.0-2_arm.Ipk] glib [glib_1.2.10-0vl3_arm.Ipk] glib-additional [glib-additional_1.2.10-2_arm.Ipk] gl...

  • Page 98

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 98 of 212 16/09/2007 12:23 if you want to try installing thunderbird or minimo, then do the following as well: # su # pango-querymodules > /etc/pango/pango.Modules # mkdir -p /etc/gtk-2.0 # gdk-pixbuf-query-loaders > /etc/gtk-2....

  • Page 100

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 100 of 212 16/09/2007 12:23 # cp install.D/debroot/usr/local/bin/* usr/local/bin # cp install.D/native/bin/* /usr/local/bin # cp install.D/native/debroot.Conf /etc # rm -r install.D you will also need sudo (see above in sudo sec...

  • Page 101

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 101 of 212 16/09/2007 12:23 use the xlauncher command to start x applications from the command line or use it as the launcher for a qt desktop icon (see firefox section for an example). The mouse function is emulated as follows:...

  • Page 102

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 102 of 212 16/09/2007 12:23 get the required packages for you. If you already have the required files downloaded or don't want to connect to the internet for installations, then you can also make apt-get install your .Deb files ...

  • Page 103

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 103 of 212 16/09/2007 12:23 if you installed debian on a 512 mb or greater sd or cf, or on a 512 mb loopback filesystem on hdd3, and have more than 200 mb of free space left on those devices, then you are ready to install openof...

  • Page 104

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 104 of 212 16/09/2007 12:23 if you see messages complaining about locale, then do the following: # cd /home/root # echo "export lc_all=c" >> .Profile # source .Profile you can add openoffice to the icevm menu by adding the follo...

  • Page 105

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 105 of 212 16/09/2007 12:23 #!/bin/sh ### startup commands ### export display=0:0 /usr/bin/icewm-session ### shutdown commands if [ -f /etc/openoffice.Conf ]; then umount `cat /etc/openoffice.Conf` 2>/dev/null fi umount /mnt/car...

  • Page 106

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 106 of 212 16/09/2007 12:23 thunderbird also requires x/qt and works nicely as well if you have the x render update [xqt-libxrender_1.2.2_arm.Ipk]. Make sure you install it if you manually installed x/qt. If you have installed o...

  • Page 107

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 107 of 212 16/09/2007 12:23 libgcc1_1%3a3.4.3-12_arm.Deb libglib2.0-0_2.6.4-1_arm.Deb libgtk2.0-0_2.6.4-1_arm.Deb libgtk2.0-bin_2.6.4-1_arm.Deb libgtk2.0-common_2.6.4-1_all.Deb libidl0_0.8.5-1_arm.Deb libkrb53_1.3.6-2_arm.Deb li...

  • Page 108

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 108 of 212 16/09/2007 12:23 natively, or as a loopback filesystem. You will need at least 20mb of disk space for quantumstep. If you create a loopback filesystem, make it at least 32mb. To manually install it, you will need the ...

  • Page 109

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 109 of 212 16/09/2007 12:23 once wellenreiter is installed, create a network profile for it as follows: account name: wellenreiter config non-spec ess-id: "any" (unticked) ess-id: test network type: 802.11 ad-hoc wep key type: d...

  • Page 110

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 110 of 212 16/09/2007 12:23 then you need to symlink libpcap.So.1 as follows # su # ln -s /home/root/usr/lib/libpcap.So.0.6.2 /home/qtpalmtop/lib/libpcap.So.1 now modify /usr/local/etc/kismet.Conf to update the following entries...

  • Page 111

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 111 of 212 16/09/2007 12:23 installing yahoo messenger clone qazoo this works quite nicely, although i hate the default icon. You need to install the following packages: libyahoo2 - [libyahoo2_cvs-20040713_arm.Ipk] qazoo - [qazo...

  • Page 112

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 112 of 212 16/09/2007 12:23 kino2 - [kino2_0.4.3c_arm.Ipk] bvdd - [bvdd_0.4.0-1_arm.Ipk] mplayer-bvdd - [mplayer-bvdd_1.1.5-1_arm.Ipk] zplayer - [zplayer_0.1.0_arm.Ipk] the intel wireless media extension (iwmmxt) is a feature of...

  • Page 113

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 113 of 212 16/09/2007 12:23 zplayer can play videos in window mode or fullscreen if they are encoded with 320x200 resolution without adding extra parameters. However, in order to play 352x288 encoded pal videos in fullscreen mod...

  • Page 114

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 114 of 212 16/09/2007 12:23 installing opera although this is an older package, it will still work with the c3000 and c3100. You need to install the following packages: opera_sl-5x00-7.30.9965_arm.Ipk opera-cseries-fix_7.30_arm....

  • Page 115

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 115 of 212 16/09/2007 12:23 should go into /home/qtpalmtop/shared/games/doom. You may want to copy doom.Wad and doom2.Wad and any other wad files you might have into that directory. Doom runs quite nicely and you can use either ...

  • Page 116

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 116 of 212 16/09/2007 12:23 to install heretic, you need to install the following packages: libsdl - [libsdl_1.2.5-slzaurus20050731_arm.Ipk] libsdl-mixer - [libsdl-mixer_1.2.5cvs-1_arm.Ipk] libsdl-net - [libsdl-net_1.2.5cvs-1_ar...

  • Page 118

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 118 of 212 16/09/2007 12:23 qtopia-sysinfo_1.23_arm.Ipk - enhanced sysinfo tool with process and mount controls qtopia-addressbook_1.23_arm.Ipk - addressbook with alphanumeric sorting support qtopia-combbatteryapplet_1.0.6_arm.I...

  • Page 119

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 119 of 212 16/09/2007 12:23 qtopia-memoryapplet_1.0.4_arm.Ipk is a modified version of the memory applet for the c3x00 series that can create a swapfile on /hdd3 and larger swapfile size up to 512mb. Building your own packages y...

  • Page 120

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 120 of 212 16/09/2007 12:23 destination location. To unpack an ipk file to see what is inside it, do the following: # unpackipk somefile.Ipk to create your own ipk file, do the following to create the ipk file structure: # newip...

  • Page 121

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 121 of 212 16/09/2007 12:23 xqt-fonts-encodings [xqt-fonts-encodings_4.3.0-3_all.Ipk] atk [atk_1.6.1_arm.Ipk] gtk [gtk_1.2.10.1_arm.Ipk] gtk2 [gtk2_2.4.13_arm.Ipk] libtiff [libtiff3.6.1-1_arm.Ipk] pango [pango_1.4.1_arm.Ipk] xqt...

  • Page 122

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 122 of 212 16/09/2007 12:23 the latest x/qt jumbo pack would be xqt-gtk-jumbo_4.3-0.7.4_arm.Ipk, however, it has not been build as an ipk yet. The xqt-gtk-jumbo cramfs or squashfs image is the equivalent of it. The default windo...

  • Page 123

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 123 of 212 16/09/2007 12:23 however, it takes some time to load and display all the icons, and thus i decided not to load them by default. They really are only eye candy so you need to manually enable them from the fluxbox menu ...

  • Page 124

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 124 of 212 16/09/2007 12:23 i have also created xqt-install.Sh which will mount the cramfs or squashfs file and run xqt-setup for you. Just place the xqt-gtk-jumbo.Cramfs or xqt-jumbo-gtk-jumbo.Squashfs file where you want and p...

  • Page 125

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 125 of 212 16/09/2007 12:23 /opt/qtpalmtop/apps/xqt: [desktop entry] name = myapp icon = myapp.Png exec = runmyapp comment = my x application type = application hideprivilege = 1 display = 640x480/144dpi,480x640/144dpi installin...

  • Page 126

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 126 of 212 16/09/2007 12:23 # xlauncher thunderbird installing abiword the abiword package from pdaxrom works with x/qt. You will need to install the following packages for abiword: libiconv - [libiconv_1.8-2_arm.Ipk] libxml2 - ...

  • Page 127

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 127 of 212 16/09/2007 12:23 installing flfm the fl file manager package from pdaxrom works with x/qt. You will need to install the following packages for flfm: flfm_0.3.0_armv5tel.Ipk xutf8_0.1.1_armv5tel.Ipk libxd640_0.3.0_armv...

  • Page 128

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 128 of 212 16/09/2007 12:23 the fltdj pim package from pdaxrom works with x/qt. You will need to install the following packages for fltdj: cal_3.5_armv5tel.Ipk libfltk_1.1.4_armv5tel.Ipk libfltk-utf8_1.1.4_armv5tel.Ipk fltdj_0.7...

  • Page 129

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 129 of 212 16/09/2007 12:23 installing gnumeric the gnumeric and related packages from pdaxrom also work under x/qt. However, you will need to install several packages to get gnumeric working. The following packages are required...

  • Page 130

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 130 of 212 16/09/2007 12:23 installing xmms the xmms package from pdaxrom works with x/qt. You will need to install the following packages for xmms: libmad_0.15.1b-1_arm.Ipk mad_0.14.2b_arm.Ipk xmms-mad_0.6-1_arm.Ipk xmms-tremor...

  • Page 131

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 131 of 212 16/09/2007 12:23 installing x/qt applications on cramfs or squashfs i have also created a xqt-apps and a xqt-mozilla compressed image in cramfs and squashfs formats which contains the above applications and some extra...

  • Page 132

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 132 of 212 16/09/2007 12:23 following: # su # ./xqt-install.Sh note: you can put both xqt-gtk-jumbo and xqt-apps (plus any additional ones) in the same directory as xqt-install.Sh and just run it once, however, you can only have...

  • Page 133

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 133 of 212 16/09/2007 12:23 once the cramfs image is created you can remove, your loopback file you used to build the cramfs image and then mount your new cramfs image as a loopback filesystem and install it using xqt-setup as f...

  • Page 134

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 134 of 212 16/09/2007 12:23 ### default settings section start # swap filename swapfile=$debbase/swapfile # swap size (in mb - 64-128) swapsize=64 # debian diskimage file debimg=$debbase/pocketworkstation # debian size (in mb - ...

  • Page 135

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 135 of 212 16/09/2007 12:23 start openoffice as follows or launch it from the icewm menu: # soffice & if you have space, you replace the openoffice cram file with its extracted version by extracting its content and then removing...

  • Page 136

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 136 of 212 16/09/2007 12:23 debian pocketworkstation requires a lot of space because it is a complete debian system. You might not want the whole system, but instead you just want to install a few of the debian packages (.Deb fi...

  • Page 137

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 137 of 212 16/09/2007 12:23 pdaxqtrom 0.8.2 the new x/qt super jumbo package is the next generation of x/qt and is based on existing base x/qt packages (thanks takuya murakami) and the specially compiled x/qt packages from pdaxr...

  • Page 138

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 138 of 212 16/09/2007 12:23 x/qt running icewm with customised silverxp theme the x/qt menu tab under qtopia to launch x apps directly.

  • Page 139

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 139 of 212 16/09/2007 12:23 a second image, pdaxqtrom apps, is also provided as an add-on with the applications listed below pre-installed and configured. The pdaxqtrom base and application images are available from the followin...

  • Page 140

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 140 of 212 16/09/2007 12:23 blackdown as well. The classpath samples can be tested by using the jamtest script. Jamvm and classpath can be used to run applications compiled for java 1.4.X or later which blackdown cannot since it...

  • Page 141

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 141 of 212 16/09/2007 12:23 firefox 1.5 dillo-xft 0.8.5 thunderbird 1.0.7 sylpheed 2.0.2 gimp 2.3.4 gqview 2.1.1 scite 1.62 nedit 5.4 gftp 2.0.18 axyftp 0.5.1.

  • Page 142

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 142 of 212 16/09/2007 12:23 xchat 2.6 gaim 2.0 gyach 0.9.4 gtkyahoo 0.18.2 dia 0.92 bluefish 0.13 stardict 2.4.3 galculator 1.2.5 planner 0.13 fltdj 0.7.

  • Page 143

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 143 of 212 16/09/2007 12:23 flfm 0.3 rox 2.2 ethereal 0.10.9 tightvnc 1.2.9 epdfview 0.2.1. Xpdf 3.01 minimo 0.12 links 2.1 free42 x48.

  • Page 144

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 144 of 212 16/09/2007 12:23 leafpad 0.7.9 grisbi 0.5.8 imagemagick 6.2.5 denemo 0.5.3 xmms 1.2.10 putty 0.58 xarchiver 0.3.1 mc 4.6.1.

  • Page 145

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 145 of 212 16/09/2007 12:23 gpsdrive 2.10pre3 smsessy 0.1.1 (wip) gpaint2 0.2.3 gpe-gallery 0.97 gmplayer 1.1pre8 dosbox 0.63 homebank 3.2 knowde 1.8.0 many more untested packages are available from the pdaxrom x/qt feed as well...

  • Page 146

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 146 of 212 16/09/2007 12:23 from qtopia desktop scripts, the command line and even from within a x terminal. The general syntax is: # xlauncher appname you can also add a -debug right after xlauncher when you are trying to troub...

  • Page 147

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 147 of 212 16/09/2007 12:23 this script can be used to toggle the default behaviour of the qt desktop icons. You can use it to enable or disable the xembed mode. When xembed is enabled, all the desktop icons under the x/qt tab w...

  • Page 148

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 148 of 212 16/09/2007 12:23 alt + 1 = virtual window 1 alt + 2 = virtual window 2 alt + 3 = virtual window 3 alt + 4 = virtual window 4 alt + x = launch terminal multi-aterm has the following key shortcuts: ctrl + alt + n = new ...

  • Page 149

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 149 of 212 16/09/2007 12:23 prefer. Additionally, a tabbed multi-aterm is also available and can be used in both opaque and transparent mode. You can also use the putty terminal as well. Desktop icons are provided by idesk. You ...

  • Page 150

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 150 of 212 16/09/2007 12:23 you will need to check both "pass all backdrop mouse clicks to window manager" and "blackbox root menus hack" in order to get the fluxbox menu back. Pdaxqtrom also has multilingual support built-in as...

  • Page 151

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 151 of 212 16/09/2007 12:23 if you want to prevent scim from loading and thus start up faster and use less resources, then use the monolingual command or create a file called "monolingual" under /etc/x11: # su # touch /etc/x11/m...

  • Page 152

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 152 of 212 16/09/2007 12:23 also compiled a few plugins for abiword, mainly text converters so you can open additional document types such as openoffice, mswrite and pdf files. I also got printing to a pdf file working partially...

  • Page 153

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 153 of 212 16/09/2007 12:23 sound tools esdloop esdplay esdrec internet tools links gftp-text plink psftp pterm puttygen puttytel graphics tool animate composite convert identify import mogrify montage pdaxqtrom games packages t...

  • Page 154

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 154 of 212 16/09/2007 12:23 xbomb 2.1a (xlauncher xbomb) xdemineur 2.1.1 (xlauncher xdemineur) xkobo 1.11 (xlauncher xkobo) xpuyopuyo 0.9.8 (xlauncher xpuyopuyo) xshogi 1.3 (xlauncher xshogi) xsokoban 3.3 (xlauncher xsokoban) al...

  • Page 155

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 155 of 212 16/09/2007 12:23 if you are a newbie. Advanced users still should be very careful when they try out the other beta distros. Keep in mind that putting another distro onto the sl-c3000 will wipe everything on it so make...

  • Page 156

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 156 of 212 16/09/2007 12:23 modules (since they won't fit onto the tiny flash where modules normally are located). I only tried the full cacko 1.23 on my sl-c3100 and noticed quite a few annoying error messages when booting up c...

  • Page 157

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 157 of 212 16/09/2007 12:23 really like in cacko and created packages that can be installed on the sl-c3000 sharp distro so that my sl-c3000 can also benefit from some of the useful cacko features and updates that is available f...

  • Page 158

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 158 of 212 16/09/2007 12:23 the above is a screenshot of cacko after heavy customisation. It looks just like my customised sharp distro. I also symlinked an australian locale/inputmethod and also added an australian icon for the...

  • Page 159

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 159 of 212 16/09/2007 12:23 which can be installed on a pc or laptop has all the available applications pre-installed by default. The c3000 and c3100, as well as the c1000 and c3200 share a common feed. In addition, there is als...

  • Page 160

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 160 of 212 16/09/2007 12:23 this is a screenshot from the pdaxrom 1.1.0 beta1 on the c3000 after a bit of tweaking with the look and feel. See my custom pdaxrom page to see a list of customisation/fixes that i have applied to my...

  • Page 161

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 161 of 212 16/09/2007 12:23 the latest version of openzaurus for the c3x00 is 3.5.4.1 which is build with the 2.6.16 kernel instead of the standard 2.4.20 kernel that the zaurus was released with. Openzaurus being a bleeding edg...

  • Page 162

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 162 of 212 16/09/2007 12:23 expand their repository to include more useful applications and actually test their packages before they put them on their feeds. They also need to get off their high horse and not just say that oz is...

  • Page 163

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 163 of 212 16/09/2007 12:23 using one of these bootloaders might be a way to boot and pivot the rootfs on the c3000 to overcome the tiny 16m flash problem. Openzaurus vs pdaxrom - a distro for the sl-c3000 i am quite happy with ...

  • Page 164

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 164 of 212 16/09/2007 12:23 cf pcmcia service works on both oz and pdaxrom, however, the cf card is not automatically mounted after reboot sd card service works on both but by default is significantly slower on oz since it uses ...

  • Page 165

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 165 of 212 16/09/2007 12:23 games pdaxrom is the king in games. Not only can it support many games through emulators, but there are also a lot of user contributed games of all sorts. Even a playstation emulator has been ported a...

  • Page 166

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 166 of 212 16/09/2007 12:23 both of these possibilities would be x11 based. I have decided to build pdaxii13 for my sl-c3000 which is based on the c3000 beta2 but much more polished. I have fixed all the shortcomings and bugs th...

  • Page 167

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 167 of 212 16/09/2007 12:23 16mb of nand which is a major shortcoming. The later models in this series do not have this problem anymore and all have 128mb of nand instead. Because of that, the pdaxrom version for the sl-c3000 ru...

  • Page 168

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 168 of 212 16/09/2007 12:23 to flash pdaxii13 spitz (alice), you will first need to repartition your internal microdrive. The original partitioning provided by sharp is quite adequate for the base install, however, if you had in...

  • Page 169

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 169 of 212 16/09/2007 12:23 your current partition layout). You will need to reboot your zaurus once you have repartitioned it and then repeat the above steps to get into the maintenance menu again and then into the pdaxii13 upd...

  • Page 170

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 170 of 212 16/09/2007 12:23 it is also possible to apply all the pdaxii13 fixes to the c3x00/c1000/c8x0/c7x0 without reflashing to pdaxii13, ie you can upgrade your existing pdaxrom beta1/beta3 setup to pdaxii13 without requirin...

  • Page 171

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 171 of 212 16/09/2007 12:23 mplayer (video player) gplflash (flash player) flite (speech synthesizer) bzip2 (compression utility) unrar (uncompression utility) unzip (uncompression utility) diffutils (file comparison utility) ip...

  • Page 172

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 172 of 212 16/09/2007 12:23 games: xdemineur (mines) tetrix (tetris) tictac (tictactoe) xpat2 (solitaire) xinvaders (space invaders) xkobo there are many more packages beside the ones on the official feeds. Many user contributed...

  • Page 173

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 173 of 212 16/09/2007 12:23 there are two types of changes to the keymappings. The first one are the essential fixes to make the keymap work, and the second ones are enhancements to make it more usable and similar to the keyhelp...

  • Page 174

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 174 of 212 16/09/2007 12:23 shift+alt+right = send to next desktop ctrl+alt+d = toggle show desktop ctrl+alt+m = toggle maximize/restore window fn+ctrl+alt+down = moverelativevert fn+ctrl+alt+up = moverelativevert fn+ctrl+alt+le...

  • Page 175

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 175 of 212 16/09/2007 12:23 you can also manually switch the keyboard mapping for your usb keyboard by using the usb keyboard selector tool. It allows you to switch between the default zaurus keymapping (spitz.Xmodmap) and the d...

  • Page 176

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 176 of 212 16/09/2007 12:23 xpdf has the following default key mappings: o = open file r = reload f = find next n = next page p + previous page + = zoom in - = zoom out z = zoom page w = zoom page width 0 = zoom normal q = quit ...

  • Page 177

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 177 of 212 16/09/2007 12:23 ctrl+shift+f = toggle full screen mode shift+insert = paste x selection into active tab. Ctrl+shift+v = paste x selection into active tab. Shift+up = scroll up one line shift+down = scroll down one li...

  • Page 178

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 178 of 212 16/09/2007 12:23 if scrot is installed it will use scrot to capture a png image, otherwise xwd is used instead and if imagemagick is installed, then it will be used to convert the xwd image into a png image. In pdaxii...

  • Page 179

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 179 of 212 16/09/2007 12:23 eval "rox --pinboard=mypinboard" & and then restart x. The config files for rox are under /usr/apps and /home/root/choices/roxfiler in pdaxii13, the above change has been implemented in such a way tha...

  • Page 180

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 180 of 212 16/09/2007 12:23 into the background section. There is also a command line tool called rox-bset which you can use to replace the background as well as enabling random backgrounds. To change the theme for openbox, use ...

  • Page 181

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 181 of 212 16/09/2007 12:23 most applications in pdaxrom are gtk based, but there are also a few qt applications. Finally, in pdaxii13, the order of the icons on the toolbar can be changed with the panel manager tool. This tools...

  • Page 182

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 182 of 212 16/09/2007 12:23 some application can be tailored to a specific window size by editing their config files. Other applications have the size hardcoded. I have recompiled a few such applications, ie gqview and abiword. ...

  • Page 183

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 183 of 212 16/09/2007 12:23 openbox (default with matchbox desktop) openbox (with rox pinboard) icewm (with rox pinboard) fluxbox (with rox pinboard) e17 (enlightenment).

  • Page 184

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 184 of 212 16/09/2007 12:23 the default window manager in pdaxii13 is openbox, just like in pdaxrom. However, once you exit x, you can use xselect to switch and make icewm or fluxbox your default window manager which will run wh...

  • Page 185

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 185 of 212 16/09/2007 12:23 midnight commander (mc) is a console based file manager that is by default installed in pdaxrom and has been updated in pdaxii13. Additionally, pcmanfm which is a fast and efficient file manager is al...

  • Page 186

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 186 of 212 16/09/2007 12:23 and lastly, xfe which is much like windows explorer has also been included in pdaxii13. Terminals mrxvt is the default terminal in pdaxii13 because it looks nice and has pseudo transparent background ...

  • Page 187

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 187 of 212 16/09/2007 12:23 aterm and multi-aterm, as well as rxvt are also available as alternative terminals and installed on pdaxii13 by default. Xterm which is a bit broken in pdaxrom has been fixed in pdaxii13 and displays ...

  • Page 188

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 188 of 212 16/09/2007 12:23 zaurus user pdaxii13 has a zaurus user to run certain services such as samba, xscreensaver and amule where security is important, but for most other things, the root user is used. This is a slight sec...

  • Page 189

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 189 of 212 16/09/2007 12:23 when you select the reboot option from the menu, you will get prompted to confirm just like when you select exit to quit x. Pdaxii13 startup sequence the boot and startup process on pdaxii13 spitz is ...

  • Page 190

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 190 of 212 16/09/2007 12:23 fsck fsck is run automatically each time you reboot. However, if your filesystem is too messed up, you will need to run fsck manually. In most cases, you will be thrown to a terminal shell prompt duri...

  • Page 191

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 191 of 212 16/09/2007 12:23 pressing the little reset button inside the battery compartment..

  • Page 192

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 192 of 212 16/09/2007 12:23.

  • Page 193

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 193 of 212 16/09/2007 12:23 the new pdaxii13 config tool pdaxcfg allows you to easily enable and disable each of the options contained in pdaxii13.Conf as well as control the maintenance mode. Additionally, the pdaxii13 config t...

  • Page 194

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 194 of 212 16/09/2007 12:23 you can also manually mount and unmount the sd card, cf card and all connected usb storage devices. The card applet has been enhanced to allow this. Usb network/storage the usb module works in two mod...

  • Page 195

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 195 of 212 16/09/2007 12:23 similarly, i have also added a script called usbstorage which quickly switches the usb mode back to storage mode using the previously configured options. Using usbnet and usbstorage you can quickly sw...

  • Page 196

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 196 of 212 16/09/2007 12:23 the zaurus also has a samba client, so it can mount other machines that have samba enabled, even windows machines. Additionally, the linneighborhood interface allow you to mount samba/windows shares f...

  • Page 197

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 197 of 212 16/09/2007 12:23 then use the ppp dialer to connect to the phone to enable the gprs connection. Wifi wireless networking is also supported in pdaxii13. Some extra firmware is included in pdaxii13 to support wifi devic...

  • Page 198

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 198 of 212 16/09/2007 12:23 using the new network-cfg tool in pdaxii13, you can configure your usb based network device and save multiple configurations as separate profiles and also establish a network connection using the netw...

  • Page 199

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 199 of 212 16/09/2007 12:23 after installing the scim packages, you will also need to set the xmodifiers environment variable as follows: export xmodifiers=@im=scim export gtk_im_module=scim export qt_im_module=scim place the ab...

  • Page 200

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 200 of 212 16/09/2007 12:23 dictionary files can be used. There is also a complete wikipedia that can be installed into qbedic for reference. Qbedic dictionary files can be placed into any directory, but by default they are loca...

  • Page 201

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 201 of 212 16/09/2007 12:23 abiword is a nice word processor, but it defaults to a 800x600 screen resolution which is not very usable for a zaurus. For the c3000, it should be changed to 640x480. This can be done by editing /hom...

  • Page 202

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 202 of 212 16/09/2007 12:23 # mplayer -vo bvdd -ac mad -ao ss -framedrop -really-quiet file to force fullscreen playback, add the -vm option: # mplayer -vo bvdd -ac mad -ao ss -framedrop -really-quiet -vm file the xmmsmplayer ad...

  • Page 203

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 203 of 212 16/09/2007 12:23 alternatively, smplayer is a qt based mplayer frontend which i customised to be able to run atty's optimized mplayer-bvdd. In pdaxii13, mplayer is a wrapper script which calls the real mplayer binarie...

  • Page 204

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 204 of 212 16/09/2007 12:23 use the wm8750mixer tool to control the enhanced mixer settings. Video4linux pdaxii13 also has v4l support with several standard camera drivers as well as spca5xx which supports a lot of usb webcams. ...

  • Page 205

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 205 of 212 16/09/2007 12:23 the jamvm and classpath packages gives you a java compatable runtime, however, in order to develop java applications, you will need a java compiler and other tools like jar, javah, javap and javadoc. ...

  • Page 206

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 206 of 212 16/09/2007 12:23 # ./make you can also use strip to strip the binary to make it smaller once it is built. Usually, there is a destdir variable defined in the makefile which can help you turn the compiled binaries into...

  • Page 207

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 207 of 212 16/09/2007 12:23 there currently are two ipk file formats. One uses the tar and gz format, wheras the other one uses a different binary format that is the same as the debian .Deb format. The zaurus with default sharp ...

  • Page 208

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 208 of 212 16/09/2007 12:23 the updater-tools.Bin file is a tar file. It contains utilities from the pdaxrom tools.Tar file. # tar xvf tools.Tar i removed the kernel images and nand patches from the extracted tar file and added ...

  • Page 209

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 209 of 212 16/09/2007 12:23 image of a more heavily customised version of the ripped initrd.Bin file with many more pre-installed applications. Note that the file structure between hdimage-base and hdimage-full differs slightly ...

  • Page 210

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 210 of 212 16/09/2007 12:23 http://support.Ezaurus.Com/sl-3000/qa/ - zaurus sl-c3000 faq in japanese http://trisoft.De/zaurus.Htm - one of the better places for buying a zaurus (they have an english manual too) http://www.Stream...

  • Page 211

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 211 of 212 16/09/2007 12:23 http://undertow.2y.Net/zaurus/bin/ - misc zaurus binaries http://www.Skill-engineering.Com/zaurus/ - screensaver and other useful tools http://www.Zaurusthemes.Org - zaurus themes and wallpapers http:...

  • Page 212

    My zaurus sl-c3000 and sl-c3100 http://www.Users.On.Net/~hluc/myzaurus/ 212 of 212 16/09/2007 12:23 contrib feeds http://www.Tyrannozaurus.Com/feed/beta3/feed/ - combined pdaxrom beta3 compatible feed http://www.Tyrannozaurus.Com/feed/beta3/custom/ - my custom/updates feed http://www.Hermocom.Com/fe...