Summary of B5210
Page 1
B5210 2 megapixel day/night bullet ip camera user manual www.Zavio.Com.
Page 2
1 content safety instruction ............................................................................................................................................. 2 minimum system requirement & product feature .....................................................................................
Page 3: User Manual
2 user manual safety instruction before you use this product this product has been designed with safety in mind. However, the electrical products can cause fires which may lead to serious body injury if it is not used properly. To avoid such accidents, be sure to heed the following. legal cautio...
Page 4
3 in case of abnormal operation if the unit emits smoke or an unusual smell, if water or other foreign objects enter the cabinet. If you drop the unit or damage the cabinet:1 disconnect the cable and the connecting cables. 2 contact your authorized dealer or the store where you purchased the produ...
Page 5: System Requirement
4 minimum system requirement & product feature system requirement for normal operation and viewing of the network camera, it’s recommended that your system meet these minimum requirements for proper operation: item requirements cpu minimum intel® core 2 duo or higher (core i3 or above is recommended...
Page 6: Product Features
5 product features system resolutions h.264 / mpeg-4 / motion jpeg screen resolution higher than 1024 * 720 pixels compressing format h.264 / mpeg-4 / motion jpeg frame rate up to 30 fps at 1920x1080 image settings rotation: mirror, flip, mirror flip brightness / contrast / saturation / sharpness ov...
Page 7: Main Page
6 main page toolbar of main page.
Page 8
7 profile click the drop-down menu to choose video compression mode of live view among h.264, mpeg-4 and mjpeg. Note: as long as the operating system is not able to afford loading under h.264 mode, please downgrade the mode to mpeg-4 or mjpeg. View size select the desired view size of image resoluti...
Page 9
8 ptz click the home button and it brings you back to the center no matter what position you are at. Move the camera view to the direction that the various arrows you click on. Preset use the various direction arrows to steer the camera view to the required position, and name it for the specified po...
Page 10: Basic Setup
9 basic setup account account list the device default account and password setting is “admin / admin”. That means everyone who knows ip address can access the device including all configuration. It is necessary to create a new password if the device is intended to be accessed by specific ones. Click...
Page 11: Network
10 network tcp/ip internet protocol version 4 (tcp/ipv4) obtain an ip address automatically (dhcp): if a dhcp server is installed on the network, to select this while the ip address is assigned by the dhcp server. Obtain dns server address automatically: select this to obtain the address of dns serv...
Page 12
11 note: reboot the ip camera after the network setting has been made. Note: if you connect the ip camera with your computer directly, the default network domain of camera is 192.168.1.Xx pppoe if your isp provides dynamic ip withauthentication by username and password, type all pppoe information in...
Page 13: Date Time
12 use the following dns server address: select this when you set the fixed address as the ip address of dns server. Primary dns server: enter the ip address of the primary dns server. Secondary dns server: enter the ip address of the secondary dns server. Note : 1. Pppoe (point-to-point protocol ov...
Page 14: Video
13 manual setting: select this mode to adjust manually the date and time of this ip camera. Synchronize with ntp: specify the ntp server name and click “update now” to synchronize the date and time of this ip camera with those of the time server, known as the ntp server. Time zone time zone: select ...
Page 15
14 profile1(h.264): h.264 provides higher compression rate than mpeg-4. Thus, h.264 can decrease the bandwidth usage and further apply on 3g. However, h.264 will occupy more system resources than mpeg-4. As long as the operating system appears operating difficulties under h.264 format, please change...
Page 16
15 click “add” and a setting pop-up window comes out. A translucent rectangle is located at up left of the image, drag it to where you wish to cover and resize it. Enter a descriptive name, select the color and enable it then save. Profile there are five stream profiles available for quick set-up. T...
Page 17: Live View
16 day/night ir cut filter mode: there are 4 modes for ir cut filter to switch auto, night mode, day mode, schedule to make ir cut filter work based on different conditions. Ir cut filter switch delay: this is interval time(by seconds) when the ir cut filter switch has been implemented till it indee...
Page 18
17 white balance color tone: 3 optional color tones(cool, real and warm), it depends on individual preference to select. Auto white balance: this is used to adjust for the different colors present in different light sources, to make the colors in the image appear the same. The ip camera can be set t...
Page 19: Ptz Control
18 resolutions for each view area. Note: except the view area1 has been fixed to be full resolution, the rest of the three are available to be set to resolution you wish in the drop-down menu. Ptz control ptz setting you may set the speed of digital pan/tilt/zoom, and also speed for preset/patrol. T...
Page 20: Playback
19 playback client pc this is for uploading the recorded file saved in the pc and play back to see the video. Click it to upload the recorded file in the pc click it to stop the current video click it to pause the playing video click it to slow down the playing speed click it to speed up the playing...
Page 21: Network Storage
20 network storage network storage provides the storage function for saving image files to the specified computer and folder connected with the operating computer. Before using this function you must go to event server in event to configure all settings and make the recording file saved here. Local ...
Page 22: Event List
21 sd card make sure to insert the sd card first then click “on”. Create a folder name for event server in sd card. Optional selection for overwrite the previous file or not, if not, you may set a warning when the capacity below the following percentage:5%, 10%, 25% and 50%. Event list event list ge...
Page 23: Motion Detection
22 action there are multiple choices for action taking which is optional for user to select all of them or part of them: send image、send notification or night mode. send image: you may set up where the image sent to, options like event server and sd card. You must configure it first, please refer ...
Page 24: System
23 system maintenance restart restart button is for reboot the ip camera digitally, you may reboot the camera manually or automatically. Click “on” and shows two modes for user to reboot the camera automatically. Sequential mode offers the selection that how many days you would like to reboot, 7 day...
Page 25: Network Basic
24 https https is a url scheme used to indicate a secure http connection. It is syntactically identical to the http:// scheme normally used for accessing resources using http. Using an https: //url/ with a different default tcp port (443) and an additional encryption / authentication layer between t...
Page 26
25 video port: specify the transmission port number of the video data, from 1124 to 65534. Time to live: set the maximum ttl that multicast can pass through. The default value is 15. Upnp if you have a routerto access to internet and the router supports upnp igd function, you need to turn on the upn...
Page 27: Led
26 led this is optional for user to select to show the led indicator or not to as the ip camera is turned on. What benefit it gets when led off is it’s not easily to be aware when somebody sneak in the space where the camera installed, especially at the darkness. System log system log enable the rem...