Summary of D3100
Page 1
1 86085h9000000
Page 2
1 zavio d3100/d3200 quick installation guide please follow the installation steps below to set up d3100 / d3200 fixed dome ip camera. Check the package contents against the list below. See p.1 physical overview. See p.2 i/o terminal block circuit. See p.3 i/o terminal block pin definition. See p.3 l...
Page 3
2 physical overview built-in microphone focus adjustment ring microsd/sdhc ethernet / poe reset power led indicator network led indicator external i/o connector dome bubble slide cover mounting hole routing hole leave the slide cover if you would like to plug in cables through the side of top cover ...
Page 4
3 i/o terminal block circuit i/o terminal block pin definition this camera provides a external i/o terminal block which is used to connect input/ output devices. The pin definitions are described below. Pin definition description max. V/a 1 ground - 2 + 5v dc 5v dc 0.5w 3 audio_in(+) unbalanced, 1.4...
Page 5
4 led indicator definition led color indication network blue flash blue while network activity. Power red steady red for booting up process; steady red 30 seconds when wps configure failed. Blue steady blue for booting up completion purple flash purple during firmware upgrading; when reset button pr...
Page 6
5 b. Wall mounting and ceiling mounting 1) attached the drill template to the wall. Drill three holes into the wall, which two for screws and one for cable (if you want to route cables through conduit hole). Then hammer the supplied plastic anchors into the screw holes and secure the plate with supp...
Page 7
6 c. Lens focus range d. Completion the camera has only power over ethernet (poe) built-in. (there is no dc connector inside.) 1. Using a standard rj-45 network cable, connect the ip camera to a poe-enabled hub / switch / router. Note: if using a non-poe switch, please use a poe power injector to co...
Page 8
7 e. Connect cables and power supply 1) clean the dome bubble to remove the dust and finger print. 2) align the slide cover down to the u-shape position. 3) tighten the dome cover to the clockwise direction and make slide cover reaching the routing hole. Microsoft os:use the software cd to install i...
Page 9
8 2 2. Click the intelligent ip installer icon on your desktop. The main page will show up listing all active camera and video server devices. Select the relevant ip camera from the list and click link to ie. 3. Enter your username and password to login to the ip camera. (default is admin / admin) 4...
Page 10
9 mac os using safari browser 7. Live video displays in the centre of your web browser. 1. Select safari icon 2. Click bonjour function and select the camera you wish to access. 3. Enter name and password to login to the ip camera. (default is admin / admin) 4. The monitor image will be displayed in...
Page 11
10 lighting environment setting the default setting of lighting environment is auto. However, you may also select 50 or 60 hz upon the lighting environment of your country. Go to “setting > live view > camera setting > image setting”, select the environment setting you wish. Change the web interface...
Page 12
11 application of ip camera.
Page 13
12.