Summary of B5110
Page 2
Zavio d510e-varifocal lens quick installation guide please follow the installation steps below to set up your d510e-varifocal lens ip camera. Check the package contents against the list below. See p.1 physical overview. See p.1 install the hardware and connect all cables. See p.2 microsoft os: use t...
Page 3
Install the hardware and connect all cables a. Wall mounting and ceiling mounting 2 1. Unfasten the cover of the dome ip camera. Be careful do not scratch the cover glass. 2. Use the 2 supplied screws to fix the base of the ip camera to a flat surface. (vertical or horizontal) 3. Unscrew the pan scr...
Page 4
B. Connect all cables b1. Power over ethernet (poe) 1. Using a standard rj-45 network cable, connect the ip camera to a poe-enabled hub / switch / router b2. Without power over ethernet (poe) connection 1. Connect the power adaptor to the ip camera. 2. Using a standard rj-45 network cable, connect t...
Page 5
Access the ip camera using intelligent ip installer 1. Before using intelligent ip installer, please check two setting. A. Browser’s internet properties → security → default level b. Browser’s internet properties → privacy → uncheck pop-up blocker 2. Click the intelligent ip installer icon on your d...
Page 6
4. When accessing the ip camera for the first time, a yellow information bar appears below the address bar: this website wants to install the following add-on: ‘axvideoview.Cab from ‘zavio inc’ . 5. Click the information bar, and select install activex control . 6. Click install . 7. Live video disp...
Page 7
Mac os using safari browser change light environment setting the default setting of lighting environment is 60hz. However, if the image appears flickery, this might be because the lighting environment in your country is 50 hz. Hence, this setting can be changed into 50hz. Or if you wish to use this ...
Page 8
Change the web interface into your preferred language use the settings screen to set the language of the web interface. Go to “setting → basic → system → initialize”. 1. Insert software cd into your cd-rom. 2. Browse and select the preferred language from language pack in the software cd and then cl...
Page 9: Snapshot
7. The ip camera will send you a message with its public ip and private ip if the ip notification option is enabled. 8. Click on the small camera icon. Then, choose “view a new contact's webcam”. 9. The ip camera automatically accepts your invitation and its live video is displayed. 10. Click action...
Page 10
Access to the internet a. Internet connectivity of the ip camera can be established by inputting the cameras ip information within the information section . (please go to setting → basic → network → information ) b. Internet connectivity of the ip camera can be established through pppoe (point-to-po...
Page 11
C. Internet connectivity of the ip camera can be established if your router is upnp (universal plug and play) enabled. The ip camera is automatically detected and added to “my network places” on your computer. Please note that only home routers manufactured after 2006 support the upnp function. C1. ...
Page 12
Memo ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ……………………………………………………………...
Page 13
Memo ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ……………………………………………………………...
Page 14
Memo ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ……………………………………………………………...