0 zavio outdoor ir dome quick installation guide.
1 quick installation guide please follow the installation steps below to set up your ip camera. Check the package contents with the list below. See p.1 physical overview. See p.2 i/o terminal block circuit. See p.3 i/o terminal block pin definition. See p.3 led indicator definition. See p.4 installa...
2 physical overview cd5220/ cd6230/ cd6330
3 i/o terminal block circuit note: please use the supplied waterproof rj45 connector and seal all connectors tightly to avoid moisture. I/o terminal block pin definition pin color definition description max. V/a green & white audio in connect the wires of the audio input device to gnd (white) and au...
4 led indicator led color indication network green solid green when network is established. Orange blink orange when there is network activity. Install the hardware and connect all cables a. Rj45 waterproof connector 1) make sure all components are assembled as shown on the below graph. 2) check tha...
5 (2) junction box az-j01 (optional accessory) (3) wall mount ad-m06 (optional accessory).
6 c. Connect all cables e1. Without power over ethernet (poe) connection 1. Connect the power adaptor to the ip camera. 2. Use a standard rj-45 network cable and connect the ip camera to a hub/switch/router. E2. Power over ethernet (poe) 1. Use a standard rj-45 network cable and connect the ip camer...
7 important: make sure the ir leds are not blocked by the housing as it will affect the ir performance. If the image is upside down, please use the image rotate function in video setting. Mac os using safari browser 1. Select safari icon 2. Click bonjour function and select the camera you wish to ac...
8 3. Enter name and password to login to the ip camera (default is admin / admin) 4. Live video will display in the center of your web browser.
9 z plus a. Get the image of camera with z plus. 1. Download z plus from zavio official website.. 2. Follow the instruction and install z plus. 3. Click the icon and get into the software..
10 b. Camera setting.
11 lighting environment setting default setting for lighting environment is auto. You may change exposure frequency to 50 or 60 hz at setting > live view > camera setting > image setting. Change the web interface into your preferred language before accessing the setting page to change the language o...
