1. DL manuals
  2. Zavio
  3. Security Camera
  4. D6111
  5. Quick Installation Guid

Zavio D6111 Quick Installation Guid

Other manuals for D6111: User Manual

Summary of D6111

  • Page 1

    Zavio d6111 quick installation guide please follow the installation steps below to set up your d6111 vandal dome camera. Check the package contents against the list below. See p.1 physical overview. See p.2 install the hardware and connect all cables. See p.3 microsoft os: use the software cd to ins...

  • Page 2

    Physical overview dome cover reset button rugged dome rca wire clip conduit hole plug cable gland thread-lock sealing nut cable gland claw note: the size of cable gland is m20*1.5 2.

  • Page 3

    Install the hardware and connect all cables a. Installer the hardware 1. Loosen the tamper-proof screws using supplied special hex wrench and remove the dome cover from the rugged dome. Be careful do not scratch the cover glass. 2. Disassemble the cable gland. 3. Thread the network and i/o cable (po...

  • Page 4

    B.Wall mounting and ceiling mounting plastic anchor nuts 1. Paste the drill template on the wall or ceiling which rugged dome desired. 2. Drill four holes in the wall or ceiling and insert plastic anchor nuts into them. 3. Insert the supplied screws into the corresponding anchor nuts and secure them...

  • Page 5

    Bolt c. Wall mounting with bracket (optional) 1. Route network and power cables through wall and allow extending. 2. Loosen the two bolts to rotate bracket to the desired position. 3. Thread all cable through cable gland. 4. Route network cable and power cable, then fixe those with wire clip. 5. Att...

  • Page 6

    7. Drill four holes and insert plastic anchor nuts into them. 8. Insert the supplied screws into the corresponding anchor nuts and secure them with screwdriver. D1 d. Connect all cables b1. Power over ethernet (poe) 1. Using a standard rj-45 network cable, connect the ip camera a poe-enabled hub / s...

  • Page 7

    Microsoft os: use the software cd to install intelligent ip installer power on your pc and insert the cd-rom. The setup page will show up automatically. Please follow those steps to install the firmware. Select “intelligent ip installer” and follow the installation process to complete the installati...

  • Page 8

    2. Click the intelligent ip installer icon on your desktop. The main page will show up listing all active camera and video server devices. Select the relevant ip camera from the list and click link to ie. 3. Enter your username and password to login to the ip camera. (default is admin / admin) 4. Wh...

  • Page 9

    6. Click install. 7. Live video displays in the centre of your web browser. Change light environment setting the default setting of lighting environment is auto. However, you may also select 50 or 60 hz upon the lighting environment of your country. Go to “setting → basic → camera → advance＂, choose...

  • Page 10

    Mac os using safari browser 2. Click bonjour function and select the camera you wish to access. 1. Select safari icon 4. The monitor image will be displayed in your browser . 3. Enter name and password to login to the ip camera. (default is admin / admin) 10

  • Page 11

    Change the web interface into your preferred language use the settings screen to set the language of the web interface. Go to “setting → basic → system → language”. 1. Insert software cd into your cd-rom. 2. Browse and select the preferred language from language pack in the software cd and then clic...

  • Page 12: Snapshot

    8. Add the new msn messenger account (e.G.: camera at home) to your contact list. 9. The ip camera will send you a message with its public ip and private ip if the ip notification option is enabled. 10. Click on the small camera icon. Then, choose “view a new contact's webcam”. Camera at home says: ...

  • Page 13

    Access to the internet a. Internet connectivity of the ip camera can be established by inputting the cameras ip information within the information section. (please go to setting → basic → network→ information) b. Internet connectivity of the ip camera can be established through pppoe (point-to-point...

  • Page 14

    C. Internet connectivity of the ip camera can be established if your router is upnp (universal plug and play) enabled. The ip camera is automatically detected and added to “my network places” on your computer. Please note that only home routers manufactured after 2006 support the upnp function. C1. ...

  • Page 15

    Application of ip camera 15.

  • Page 16: Memo

    Memo ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ……………………………………………………………...

  • Page 17: Memo

    Memo ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ………………………………………………………………………………….. ……………………………………………………………...