Zavio D6220 Quick Installation Manual - page 5
4
I/O Terminal Block Pin Definition
Definition Description Max.
V/A
Alarm Input 1
Connect to GND to activate, or leave
floating/unconnected to deactivate.
30V DC
Alarm Input 2
Connect to GND to activate, or leave
floating/unconnected to deactivate.
30V DC
Alarm Output
Relay contact output. Contact capacity with
resistance load.
0.3A at 125V AC
or
1A at 30V DC
LED Indicator
LED Color Indication
Network
Green
Solid green when network is established.
Orange
Blink orange when there is network activity.
Install the hardware and connect all cables
A. Wall mounting and Ceiling mounting
1) Attach the alignment sticker to the wall/ceiling. Drill three holes into the
wall. Then hammer the supplied plastic anchors into the screw holes and
secure the mounting plate with supplied screws.
2) Attach the camera to the mounting plate and turn the camera clockwise
until the clips snap to the mounting plate.
Note: When the adjustment is finished,
please change the desiccant bag in
back cover.