Summary of F 3000
Page 2
1 content safety instruction ............................................................................................................................................................ 2 minimum system requirement & product feature ......................................................................
Page 3: User Manual
2 user manual safety instruction before you use this product this product has been designed with safety in mind. However, the electrical products can cause fires which may lead to serious body injury if it is not used properly. To avoid such accidents, be sure to heed the following. legal cautio...
Page 4
3 in case of a breakdown in case of system breakdown, discontinue use and contact your authorized dealer. in case of abnormal operation if the unit emits smoke or an unusual smell, if water or other foreign objects enter the cabinet. If you drop the unit or damage the cabinet:1 disconnect the ca...
Page 5: System Requirement
4 minimum system requirement & product feature system requirement for normal operation and viewing of the network camera, it’s recommended that your system meet these minimum requirements for proper operation: item requirements cpu minimum intel® core 2 duo or higher (core i3 or above is recommended...
Page 6: Product Features
5 product features system resolutions h.264 / mpeg-4 / motion jpeg: screen resolution higher than 1024 * 720 pixels compressing format h.264 / mpeg-4 / motion jpeg frame rate up to 30 fps at 1920*1080 image settings rotation: mirror, flip, mirror flip brightness / contrast / saturation overlay capab...
Page 7: Main Page
6 main page toolbar of main page.
Page 8
7 profile click the drop-down menu to choose video compression mode of live view among h.264, mpeg-4, mjpeg and h.264. Note: as long as the operating system is not able to afford loading under h.264 mode, please downgrade the mode to mpeg-4 or mjpeg. View size select the desired view size of image r...
Page 9
8 ptz click the home button and it brings you back to the center no matter what position you are at. Move the camera view to the direction that the various arrows you click on. Preset use the various direction arrows to steer the camera view to the required position，and name it for the specified pos...
Page 10: Basic Setup
9 basic setup account account list the device default account and password setting is “admin / admin”. That means everyone who knows ip address can access the device including all configuration. It is necessary to create a new password if the device is intended to be accessed by specific ones. Click...
Page 11: Network
10 network tcp/ip internet protocol version 4 (tcp/ipv4) obtain an ip address automatically (dhcp): if a dhcp server is installed on the network, to select this while the ip address is assigned by the dhcp server. Obtain dns server address automatically: select this to obtain the address of dns serv...
Page 12
11 note: reboot the ip camera after the network setting has been made. Note: if you connect the ip camera with your computer directly, the default network domain of camera is 192.168.1.Xx pppoe if your isp provides dynamic ip withauthentication by username and password, type all pppoe information in...
Page 13: Date Time
12 use the following dns server address: select this when you set the fixed address as the ip address of dns server. Primary dns server: enter the ip address of the primary dns server. Secondary dns server: enter the ip address of the secondary dns server. Note : 1. Pppoe (point-to-point protocol ov...
Page 14: Video
13 time zone time zone: select the time zone format of greenwich mean time among different cities. The time display will be the same as the current date / time option. Daylight saving time: there are two modes to choose for setting up daylight saving time. By date: set the start and end time by sele...
Page 15
14 across the network (bit-rate) compared to motion jpeg and therefore provides a relatively high image quality at a lower bit-rate (bandwidth usage). Profile3(mjpeg): motion jpeg stream uses considerable amounts of bandwidth, but provides excellent image quality and access to every image contained ...
Page 16
15 create a new stream profile: click “add” and a setting pop-up window comes out, edit the stream profile: click the profile you appoint to modify and click “edit” to do the further setting. Day / night ir cut filter mode: there are 4 modes for ir cut filter to switch auto, night mode, day mode, ...
Page 17: Audio
16 audio audio channel full duplex: select it for simultaneous communication in both direction between the connected administrator and ip cam. It means both parties can speak and be heard at the same time. Half duplex: select it for communication in both directions, but only one direction at a time....
Page 18: Audio
17 audio please refer to p.17~18 camera setting image setting image enhancement brightness: the image brightness can be adjusted in the range 0-100, the a higher value produces a brighter image. saturation: adjust the saturation in the range 0-100, the higher value gets more colorful image. co...
Page 19
18 low light behavior: this is the operation aims at low light and night mode. According to the surroundings you can manually set the preferable settings differ from the regular “exposure settings”. Nevertheless, the low light behavior can be scheduled up by working day, weekend, and night mode as...
Page 20: Ptz Control
19 ptz control ptz setting you may set the speed of digital pan/tilt/zoom, and also speed for preset/patrol. The range goes 1-100(slow to fast). View area control panel this can be set up the selected view area in every profile. Besides the viewing window there is a ptz control panel to go to the di...
Page 21: Network Storage
20 click it to upload the recorded file in the pc click it to stop the current video click it to pause the playing video click it to slow down the playing speed click it to speed up the playing speed it displays the current playing video length it displays the whole video length it displays the curr...
Page 22: Event
21 event event server event server click “add” to create a event server then the setting page pops up. Name it, select your network type put on the storage location. This is optional to create the password for certain group to use it. Then click the “test” button to see if it works, it will show the...
Page 23
22 trigger you may activate the following trigger types as you wish depends on various conditions: motion detection: click it on for using motion detectionfunction as a sensor. You must configure motion detection function before taking this as the trigger. Set minimum time interval between 2 trigg...
Page 24: Motion Detection
23 action there are multiple choices for action taking which is optional for user to select all of them or part of them: send image、send notification、activate digital output or night mode. send image: you may set up where the image sent to, options like event server and sd card. You must configure...
Page 25: Schedule
24 schedule the schedule is made for event list to set the recording period. There are already 3 modes(working day、 weekend and night mode) has been set for user, there are 7 more modes are available to set manually. System maintenance restart restart button is for reboot the ip camera digitally, yo...
Page 26: Network Basic
25 ip address filter once enabled it, the listed ip address are allowed or denied access to the product. Add the ip address that you’d like to allow or deny and select allow or deny from the list and save it. Https https is a url scheme used to indicate a secure http connection. It is syntactically ...
Page 27
26 rtsp configuration configure the rtsp by profile, then enable or disable the authentication. Multicast status: this can be enabled or disabled the multicast. Access name: this will be shown and changed along with the profile you select. Multicast address: specify the multicast server address. Vid...
Page 28: Digital I/o
27 ddns ddns is a system which allows the domain name data held in a name server to be updated in real time. The most common use for ddns is allowing an internet domain name to be assigned to a computer with a varying / dynamic ip address. This makes it possible for other sites on the internet to es...
Page 29: Fcc Statement
28 electromagnetic compatibility (emc) fcc statement this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential install...